Question about Printers & Copiers

1 Answer

Removed paper jam, but get error message, like I haven't. How do I reset this on a canon mp460? Susan is there a tech manual?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How to repair paperjam error

Posted on May 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Right corner paper jam fixes?


This error message is displayed by the printer when paper is jammed in one or more locations. In such a case, users are recommended to remove the jammed paper from the specified location. The entire paper path must be checked for any pieces of paper. To stop the message, open and close the top most cover of the printer. Lastly, verify the flags and the sensors. If the problem persists, the cause of the error message could be a broken sensor or sensor lever.

Nov 09, 2010 | Canon PIXMA MP460 All-In-One InkJet...

1 Answer

After clearing a paper jam on my MP460, I get another error message, 'the paper is jammed. Clear the paper and press [ok]', which can't be removed. Pressing [ok] has no effect and I can't get into the main...


A few possible solutions:

- Open the top of the printer and look along the print path for pieces of paper.
- Press the reset button.
- Turn off the printer first and then unplug it. Plug it back in and turn it on. Wait for it to start up.

Good luck!
Bot


Apr 12, 2010 | Canon PIXMA MP460 All-In-One InkJet...

1 Answer

Paper iam


open the printer back cover and remove paper from it

May 23, 2009 | Canon PIXMA MP460 All-In-One InkJet...

1 Answer

Service error 6000


1. Press ON/OFF switch to reset the multifunction device 2. Removing paper jams MP450 / MP460 3. The MP460 may require repair
heres the problems currently with mp460 and at bottom is the link
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=238&modelid=13369

this is the solutions for the mp460

for the guest
clean out your ink absorber after unplug
reset printer you still have a little credit card sized paper in your printer that you need to remove it

May 09, 2009 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

Canon MP460 Paper Jam


this is only a possible solution.make sure the paper is between 17  to 24 pounds thick.i once had a jamming problem and it turned out to be the printer which canon replaced under warranty.but in the process i learned paper thickness can make a difference. i was recommended 20 pounds by a staples employee.i hope this helps you.

Apr 07, 2009 | Canon PIXMA MP460 All-In-One InkJet...

1 Answer

Canon MP460 "np paper"


Canon PIXMA MP460 error code 5010

Sep 04, 2008 | Canon PIXMA MP460 All-In-One InkJet...

3 Answers

Canon pixma mp460 code error 6000


Solutions for error 6000 Issue: ERROR LCD: Error code (5xxx through 9xxx) appears on the display

1. Press ON/OFF switch to reset the multifunction device 2. Removing paper jams MP450 / MP460 3. The MP460 may require repair
heres the problems currently with mp460 and at bottom is the link
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=238&modelid=13369

this is the solutions for the mp460

for the guest
clean out your ink absorber after unplug
reset printer you still have a little credit card sized paper in your printer that you need to remove it

May 16, 2008 | Canon PIXMA MP600 all-In-One InkJet...

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

264 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96417 Answers

old marine
old marine

Level 3 Expert

1461 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...