Question about RCA P61960 61" Rear Projection Television
JUST UP AND QUIT! Whenever you try to turn on, it tries a couple of times and you can hear a thumping noise from speaker. After it does that it just shuts itself off. please help tired of watchin the 18"
It will depend on the Chassis number you have but it sounds like a bad Deflection module or a bad Convergence power supply module. The Convergence Power supply module is on the left looking from the back mounted above the deflection module. On newer models the picture tubes can short and put these sets into shut down mode ( Three Trys). Start by unplugging the CRT modules off the neck of the tubes one at a time. If it doesn't come on you have eliminated the tubes. There will be a Red and Black set of wires from the deflection module to the convergence power supply module. Unplug it. If it fires up then it's the convergence power supply module. If not it will probably be the deflection module. The flayback transformer is a common problem along with several bad caps towards the front of the board. Let me know if this fixes it.
Posted on Oct 14, 2008
Tips for a great answer:
Nov 20, 2013 | Projection Televisions
Nov 14, 2010 | RCA P61960 61" Rear Projection Television
Mar 13, 2010 | RCA P61960 61" Rear Projection Television
Apr 05, 2009 | RCA P61960 61" Rear Projection Television
Apr 03, 2009 | RCA P61960 61" Rear Projection Television
Aug 17, 2008 | RCA P61960 61" Rear Projection Television
Dec 30, 2013 | RCA P61960 61" Rear Projection Television
341 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: