Question about Toshiba 4030CDT (P000271450) Motherboard

1 Answer

Toshiba psl48l bios resetting

Somebody put a supervisor password in my laptop

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 268 Answers

To reset the BIOS password you need to remove the CMOS battery from the motherboard of the laptop. This will require you to take apart pieces of the laptop which can be a little tricky, if you don't feel comfortable doing so , I would recommend taking it to a professional...I just don't want to see someone break there laptop!

On your particular model there is a cable running from the battery to the motherboard , you need to remove that wire from the motherboard and wait about 15-20 seconds, then plug it back in and restart the computer....that will completely reset your BIOS settings and remove your password....below is a picture for reference!

toshiba psl48l bios resetting - c21f1b3.jpg

If you found this post helpful , please leave a rating! I apprecaite it!

Posted on Oct 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hey I am trying to log on to my laptop and for some reason FORGOT my password HELP PLS


When you boot up to the log in screen type in administrator as user to log in if you cant log in

Restart your computer during the boot up process you will see on the screen for a short amount of time press a certain key to enter set up press and hold that key during the boot up process to enter BIOS scroll down to set user password or supervisor password you can change or remove your password from there

if this fails to remove your password

The most common way that we know on how to reset or clear the BIOS password is to physically remove the power from the computer by disconnecting the power plug and then removing the Cmos battery for 30 minutes from the motherboard. Another way is to reset the clear CMOS jumper on the motherboard itself. Both of the 2 methods mentioned works because most motherboards use a battery to sustain the BIOS/CMOS settings for the motherboards PROM chip. So by cutting off cmos the battery power, the BIOS/CMOS settings will be erased.

what operating system and type of computer???

hope this helps you

Aug 27, 2011 | Toshiba Motherboards

1 Answer

Used toshiba m55 has "built


When you boot up to the log in screen type in administrator as user to log in if you cant log in

during the boot up process you will see on the screen for a short amount of time press a certain key to enter set up press and hold that key during the boot up process to enter BIOS scroll down to set user password or supervisor password you can change or remove your password from there hope this helps

also

The most common way that most of us know on how to reset or clear the BIOS password is to physically remove the power from the computer by disconnecting the power plug and then removing a battery for 30 minutes from the motherboard. Another way is to reset the clear CMOS jumper on the motherboard itself. Both of the 2 methods mentioned works because most motherboards use a battery to sustain the BIOS/CMOS settings for the motherboards PROM chip. So by cutting off the cmos battery power, the BIOS/CMOS settings will be erased. Hope this helps

May 30, 2011 | Motherboards

1 Answer

Can't remember password that unlocks the laptop. System is now locked up and won't allow any input. How do you get past the start up password so it can be changed?




Remove a small coin sized CMOS battery to store all BIOS settings along with the password. To reset the password, unplug the PC, open the cabinet and remove the CMOS battery for approx. 15-30 minutes and then put it back. It'll reset all BIOS settings as well as the password and you'll need to re-enter all settings.

Under the keyboard or bottom of laptop - If you are working on a laptop computerthe location of the dipswitch (almost never a jumper) can be under the keyboard or on the bottom of the laptop in a compartment such as the memory compartment.

If it fails, then try to remove the battery for at least one hour.

the administrator if she has not made herself the administrator
click start control panel user accounts on the users tab,click the name of the computer administrator you can make yourself the administrator of your computer there which will give you all rights to change whatever you want on this computer
or

during the boot up process you will see on the screen for a short amount of time press a certain key to enter set up

Press and hold that key during the boot up process to enter BIOS scroll down to set user password or supervisor password you can change or remove your password from there

also


Ebay you can purchase a
Password Unlock/Recovery For Windows 2000/XP/Vista/7

Item title Password Unlock/Recovery For Windows 2000/XP/Vista/7

Buy It Now price: US $1.49 (Approximately AU $1.50)

hope this helps

Jan 31, 2011 | Toshiba Satellite A100 A105 Series Laptop...

1 Answer

I have Toshiba SM30604 laptop ,it has BIOS password on it, i am looking for motherboard manual to get rid of password through jumpers regards


  • Hello omer hanif, if by chance you didn't 'create a "Supervisor Password" to prevent anyone from changing the configurations in the BIOS / CMOS Setup? than we are 'OK!' Lets just say [No] for now. Bootup / Start the computer, and follow these steps: 1. When you hear the computer start-up, there will be a message that flashes very quickly at the bottom of the screen, it will read; Press F2 or F12 or on other "Computers, the 'Key Sequence may be [F11]..." The area of your attention will be [F2] Key at the top of the keyboard. The F2 Key will open the CMOS / BIOS Setup. paul7of9_15.jpg 2. Once this screen appear, you will see a 'Listing" of different set-ups. There will be instructions in the [right] Help ? area. You be using the "Arrow Keys" to (Select and Choose Items). In the first screen, there will be on the (right of the screen). 3. Set Supervisor Password = This is the "Password Setting that will prevent anyone from getting into without authorization this area that you are in now, to "Change or Configure" CMOS or BIOS setting. 4. Set User Password = This Password is use for "Logins / User Accounts... You want to "Reset or Change the Supervisor Password. Do so, and to finish; remember to use the [F10 Key] to 'Save the Changes.' Thanks for using Fix' Ya, and I hope this fix it, paul7of9

Jan 12, 2011 | Toshiba Motherboards

1 Answer

Wonder if device password can be unlocked in or reset to the firs try in BIOS


you can try if you no the password you have put on BIOS

during the boot up process you will see on the screen for a short amount of time press a certain key to enter set up

Press and hold that key during the boot up process to enter BIOS scroll down to set user password or supervisor password you can change or remove your password from there

Dec 15, 2010 | Motherboards

2 Answers

I need a pasword.when i enter the bois there need a pasword.so help me how 2 break the pasword


Hi Good day!! turn off your PC Remove your CMOS battery (2032 3volts) within 1minute and then put it back, turn on your PC now your bios password should be remove.

Oct 19, 2010 | MSI Microstar KT6 Delta (MS-6590)...

1 Answer

Removing bios password of toshiba portege 4010


HOPE THIS HELPS...BE SURE AND READ ALL BEFORE STARTING...GOOD LUCK

WARNING: Some BIOS configurations will lock you out of the system completely if you type in an incorrect password more than 3 times. Read your manufacturers documentation for the BIOS setting before you begin typing in passwords.
Award BIOS backdoor passwords:ALFAROME BIOSTAR KDD ZAAADA
ALLy CONCAT Lkwpeter ZBAAACA
aLLy CONDO LKWPETER ZJAAADC
aLLY Condo PINT 01322222
ALLY d8on pint 589589
aPAf djonet SER 589721
_award HLT SKY_FOX 595595
AWARD_SW J64 SYXZ 598598
AWARD?SW J256 syxz
AWARD SW J262 shift + syxz
AWARD PW j332 TTPTHA
AWKWARD j322
awkward

AMI BIOS Backdoor Passwords:AMI BIOS PASSWORD HEWITT RAND
AMI?SW AMI_SW LKWPETER CONDO

Phoenix BIOS Backdoor Passwords:phoenix PHOENIX CMOS BIOS

Misc. Common PasswordsALFAROME BIOSTAR biostar biosstar
CMOS cmos LKWPETER lkwpeter
setup SETUP Syxz Wodj

Other BIOS Passwords by ManufacturerManufacturer Password

VOBIS & IBM merlin
Dell Dell
Biostar Biostar
Compaq Compaq
Enox xo11nE
Epox central
Freetech Posterie
IWill iwill
Jetway spooml
Packard Bell bell9
QDI QDI
Siemens SKY_FOX
TMC BIGO
Toshiba Toshiba

Toshiba BIOS

Most Toshiba laptops and some desktop systems will bypass the BIOS password if the left shift key is held down during boot
IBM Aptiva BIOS

Press both mouse buttons repeatedly during the boot
Using the Motherboard "Clear CMOS" Jumper or Dipswitch settings

Many motherboards feature a set of jumpers or dipswitches that will clear the CMOS and wipe all of the custom settings including BIOS passwords. The locations of these jumpers / dipswitches will vary depending on the motherboard manufacturer and ideally you should always refer to the motherboard or computer manufacturers documentation. If the documentation is unavailable, the jumpers/dipswitches can sometimes be found along the edge of the motherboard, next to the CMOS battery, or near the processor. Some manufacturers may label the jumper / dipswitch CLEAR - CLEAR CMOS - CLR - CLRPWD - PASSWD - PASSWORD - PWD. On laptop computers, the dipswitches are usually found under the keyboard or within a compartment at the bottom of the laptop.

Please remember to unplug your PC and use a grounding strip before reaching into your PC and touching the motherboard. Once you locate and rest the jumper switches, turn the computer on and check if the password has been cleared. If it has, turn the computer off and return the jumpers or dipswitches to its original position.
Removing the CMOS Battery

The CMOS settings on most systems are buffered by a small battery that is attached to the motherboard. (It looks like a small watch battery). If you unplug the PC and remove the battery for 10-15 minutes, the CMOS may reset itself and the password should be blank. (Along with any other machine specific settings, so be sure you are familiar with manually reconfiguring the BIOS settings before you do this.) Some manufacturers backup the power to the CMOS chipset by using a capacitor, so if your first attempt fails, leave the battery out (with the system unplugged) for at least 24 hours. Some batteries are actually soldered onto the motherboard making this task more difficult. Unsoldering the battery incorrectly may damage your motherboard and other components, so please don't attempt this if you are inexperienced. Another option may be to remove the CMOS chip from the motherboard for a period of time.

Note: Removing the battery to reset the CMOS will not work for all PC's, and almost all of the newer laptops store their BIOS passwords in a manner which does not require continuous power, so removing the CMOS battery may not work at all. IBM Thinkpad laptops lock the hard drive as well as the BIOS when the supervisor password is set. If you reset the BIOS password, but cannot reset the hard drive password, you may not be able to access the drive and it will remain locked, even if you place it in a new laptop. IBM Thinkpads have special jumper switches on the motherboard, and these should be used to reset the system.

Oct 16, 2010 | Toshiba Motherboards

2 Answers

How to clear supervisor password in bios in 945 gccr


If you remember the password, simply enter into the bios/cmos setup, go to the section to change the password, and leave the new password fields blank. I haven't looked at the manual for this specific MB, but that is the standard way to clear any passwords stored in bios. Hope that helps! Let me know!

Jun 19, 2009 | Intel D945GCCR Motherboard

1 Answer

I need to reset the supervisor passwrod on my boistar nf325-a7


You will need to clear the "CMOS" to wipe any passwords on the bios

Good luck

Jan 11, 2009 | MSI RC410M-L Motherboard

5 Answers

Reset bios password


Using a Backdoor BIOS Password Some BIOS manufacturers implement a backdoor password. The backdoor password is a BIOS password that works, no matter what the user sets the BIOS password to. These passwords are typically used for testing and maintenance. Manufacturers typically change the backdoor BIOS passwords from time to time.
AMI Backdoor BIOS Passwords Reported AMI backdoor BIOS passwords include A.M.I., AAAMMMIII, AMI?SW , AMI_SW, BIOS, CONDO, HEWITT RAND, LKWPETER, MI, and PASSWORD.
Award Backdoor BIOS Passwords One reported Award backdoor BIOS password is eight spaces. Other reported Award backdoor BIOS passwords include 01322222, 589589, 589721, 595595, 598598 , ALFAROME, ALLY, ALLy, aLLY, aLLy, aPAf, award, AWARD PW, AWARD SW, AWARD?SW, AWARD_PW, AWARD_SW, AWKWARD, awkward, BIOSTAR, CONCAT, CONDO, Condo, condo, d8on, djonet, HLT, J256, J262, j262, j322, j332, J64, KDD, LKWPETER, Lkwpeter, PINT, pint, SER, SKY_FOX, SYXZ, syxz, TTPTHA, ZAAAADA, ZAAADA, ZBAAACA, and ZJAAADC.
Phoenix Backdoor BIOS Passwords Reported Phoenix BIOS backdoor passwords include BIOS, CMOS, phoenix, and PHOENIX.
Backdoor BIOS Passwords from Other Manufacturers Reported BIOS backdoor passwords for other manufacturers include:
Manufacturer BIOS Password VOBIS & IBM merlin Dell Dell Biostar Biostar Compaq Compaq Enox xo11nE Epox central Freetech Posterie IWill iwill Jetway spooml Packard Bell bell9 QDI QDI Siemens SKY_FOX SOYO SY_MB TMC BIGO Toshiba Toshiba Remember that what you see listed may not be the actual backdoor BIOS password, this BIOS password may simply have the same checksum as the real backdoor BIOS password. For Award BIOS, this checksum is stored at F000:EC60.
Her is a list of back door bios password resettes

Aug 10, 2008 | Intel D865GLCLK Motherboard

Not finding what you are looking for?
Toshiba 4030CDT (P000271450) Motherboard Logo

Related Topics:

859 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Brad Brown

Level 3 Expert

13530 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Are you a Toshiba Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...