EliteGroup P4M800PRO-M Motherboard Problem

There is a clear cmos jumper by the cmos battery - check manual with link provided
http://download.ecs.com.tw/dlfileecs/manual/mb/eng/p4/P4M800PRO-M2%20V2.0.zip

Hi,
I have found the manual for your P4M800PRO-M V2.0 Motherboard. The connection diagram is on page 18 of the PDF file or page 12 in the manual. You will find the manual here: http://download.ecsusa.com/dlfileecs/manual/mb/eng/p4/P4M8OOPRO-MV2.0.zip or by clicking Here.
Hope this helps. If it does, please accept and rate the solution! You can leave a testimonial or contact me with any more questions you may have. Thanks for using FixYa!

just click in it....

http://eudownload.ecs.com.tw/dlfileecs/manual/mb/eng/p4/P4M800PRO-M2%20V2.0.zip

Hi, you need to check you have the corrct memory, you need: Memory Type DDR SDRAM Number of Memory Slots 2 x 184 Pin DIMMs Supported RAM speeds 400 MHz • 333 MH

there is a converter available it connects to mux connector and ur remaining 4 pins are ready to mount

This are things that need to consider in a computer speed performance:
1. Amount of ram memory(If you have only small amount of memory then your computer performance is poor.)
2. Speed of your processor(You should need at least a 1Ghz processor speed or more).

I suggest you increase your ram memory so that your computer will perform faster.

You can find your the driver for your device (P4 M800-M7 ) from this link :
http://www.nodevice.com/driver/P4M800-M7/get34670.html
Its only 6.54MB in size.
Just input the provided verification code on top of the download box and click on download.
Hope this helps.
Goodluck!

you should just have to lift a bar up and then a metal thing which secures the cpu in place and then the cpu will only go in one way but other than that you can see the triangles you were talking about then just close the metal thing and then push the bar down and under the metal thing which secures the bar in. if you have done all this correctly everything should be fine. sorry about saying thing a lot. ha ha

you can download the drivers at : http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?DetailID=673&CategoryID=1&DetailName=Feature&MenuID=44&LanID=9

The best place to download drivers is the manufacturer's website. Elite Computer Systems (aka Elitegroup or ECS) does make a board with the P4M800-M designation. Here is the link to the downloads page from the ECS website:)

http://www.ecs.com.tw/ECSWebSite/Downloads/ProductsDetail_Download.aspx?detailid=530&DetailName=New&DetailDesc=P4M800-M%20%20(V1.0A)&CategoryID=1&MenuID=82&LanID=0

Not many drivers listed, just the BIOS updates, SATA and audio and the manual. Perhaps the manual will prove more helpful in finding whatever other drivers you might need.