Question about Epson Stylus CX6600 All-In-One InkJet Printer

2 Answers

Ink problems Just replaced my black ink with a new one from my Epson DX4450 but still the red stop light is on and i get the message that I have no black ink!!! Please note that all other colour inks are ok

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Buy a Canon

Posted on Oct 04, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 208 Answers

Hi,

1. First make sure you have installed the catridge correctly by taking out and placing it again.

2. Then,
The following Epson ink cartridges should be used in your device:

Black: T0431 (high capacity cartridge)
or T0441 (standard capacity cartridge)

And make sure you use the genuine original EPSON catridge.

3. If you are using a genuine one, then TRY TURNING OFF YOUR PRINTER AND SWITCH IT ON AGAIN.



If you do not suceed then,

Please contact Epson to resolve this problem with a technical support representative.

U.S.: (562) 276-4382
6 A.M.-6 P.M., Monday-Friday
(Pacific Time) Canada: (905) 709-3839
6 A.M.-6 P.M., Monday-Friday
(Pacific Time)
Before you call, be near your computer and printer and have ready your product name, serial number and proof of purchase information.




Hope my info solves your problem,
Let me know you want any more ideas......

Posted on Oct 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my ink light on a steady red? I have new Epson ink cartridges in it and it has also been cleaned.


sometimes the printer does not recognize that you have changed inks, however check that they are in correctly and are full, check status monitor and check ink levels on screen. As a last resort, turn printer off wait a few seconds and then turn on again.

Apr 14, 2015 | Epson Stylus DX4450 All-In-One InkJet...

1 Answer

Hi I replaced my black ink cartridge in my Epson DX4450 a little while ago with a Tesco equvilant,now it is telling me that black needs replacing,I know its not empty as it has hardly been used.I have...


I had an epson radio once AM it was a great vacuum tube set.
I had an Epson Dot matrix it also was great.
I figure the name sold when I bought a color epson printer.
It was good until I left it sit.
It cloged up from not being used often enough.
\I bought new ink dispensers since the heads are part of the machine and not set as a cartridge head...
I ripd it all down and tried cleaning and clearing it. I finally bought a new printer and it sits and it is reliable even if I do not use it that often HP...a little over 7 yrs old

Aug 23, 2010 | Epson Stylus DX4450 All-In-One InkJet...

2 Answers

The epson dx4450 does not recognise brand new cartridges, somebody have an idea?


Hi there you can download this from my website.
Main features.
SSC Service Utility allow you to do many amazing things with Your Epson printer :
1) Work directly with CSIC in Epson Stylus printers cartridges.
2) Reset or rewrite any chip using special addon device.
3) Freeze internal ink counters.
4) Reset internal ink counters even with empty cartridges.
5) Separate cleaning of color and black heads for all Epson inkjet printers, powerful cleaning mode.
6) Hot swapping of cartridges supported.
7) Resetting of protection counter (even then it is already full).
8) More then 100 different Epson printers supported
This allow many people with high printing demands to save some money (program works with both black and color cartridges).
Up to day this software works under Windows 95/98/ME/2K2/XP with both the LPT and USB printers.
Download Free
Click Link = http://www.4all2sell.com/reset-tools/sscserve.exe
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
All files on my website are only there for a limited time

Feb 20, 2010 | Epson Stylus DX4450 All-In-One InkJet...

1 Answer

Replace ink cartridge


just open the cover .when you open the cover cartridge will come to center just pull all the cartridges one by one don’t make pressure too hard it will come easily if you put more pressure and try to removing it and it is not come out then don’t do it may be you doing wrong . let it be and take help from some one who using printer and know how to fix the cartridges.
Have a nice day and do not forget to rate please...!

Feb 16, 2010 | Epson Stylus DX4450 All-In-One InkJet...

1 Answer

Epson stylus DX4450 i have changed the ink and the ink button the red light is still on and it will not let me print?


Did you use Epson Genuine Cartridges?
Epson Requires Genuine Epson Cartridges. !!!!!!!!

In Purchasing Epson's CX 5400, CX4600, & CX7400 and more, I found out that Epson does not like Generic Printer Cartridges. That sounds like your problem. Also in Purchasing the Brother's . Color that should be Yellow, will turn out Green, Blue Brown, etc.
These printers have a chip, that will detect if it is Generic or Genunie. When using Generic Cartridges, it will print lines thru the words, stripes across the picture and also do a mix match with the colors.

That's what these Companies do., so they can keep selling the ink cartridges. Some Printers, are able to use Generic, but you have to fill them up yourself and I heard, quite MESSY.

So I learned, thru trial and error, that you must use the ORIGINAL Genuine Cartridges for these PRINTERS. Some people say some models work fine compatible, but not mine.......


I had to replace the printer, but Epson, Lexmark & Brothers are always on sale. My Brother & Epson cost me $50.00 with Rebate. Don’t waste too much ink in cleaning it.

This is the only advice I can give you. If you find this helpful, pls rate me.

Thanks and Good Luck :0)

Jan 23, 2010 | Epson Stylus DX4450 All-In-One InkJet...

2 Answers

Ink red light on . which colour is out?


When red ink light flashes - one or more ink cartridges is low. When you print, a message on your screen will tell you which one(s).

When red ink light remains on - one or more ink cartridges is empty. When you try to print, a message on your screen will tell you which one(s).

Furthermore: When following the procedure for installing a new cartridge, if the red ink light was on or flashing, pressing the ink button will cause the carriage to stop with the cartridge that needs replacing under the "ink out mark" (ink droplet with a slash through it).

Jan 08, 2010 | Epson Stylus C66 Inkjet Printer

1 Answer

How do you change the ink cartridge on an epson DX4450? many thanks


Hi

Open the scanner and make sure its support locks in place.

Press the Stop button. The print head moves to the position to indicate which cartridge is low or expended.


Press the Stop button again. If another cartridge is low or expended, it moves to the teardrop position. Press the Stop button again to see if more cartridges are low or expended. If no other cartridges are low or expended, the print head moves to the replacement position on the right.

Open the cartridge cover.

Squeeze the tab on the cartridge and lift the cartridge straight up to remove it. Dispose of it carefully. Do not take the used cartridge apart or try to refill it.



Before opening the new cartridge package, shake it four or five times.
8. Remove the cartridge from the package, but be careful not to touch the green chip on the cartridge.
9. Remove the yellow tape from the bottom of the cartridge. Caution:
Do not remove any other labels or seals, or ink will leak.
10. Insert the new cartridge into the holder and push it down until it clicks into place.
11. Once you replace all the necessary cartridges, close the cartridge cover and push it down until it clicks into place.
12. Release the scanner support and close the scanner.
13. Press the Stop button to begin charging the ink. This takes about 1 1/2 minutes.
When the
On light stops flashing and remains on, ink charging is finished.

Jan 08, 2010 | Epson Stylus DX4450 All-In-One InkJet...

1 Answer

My Epson DX4450 is playing up. I have used some


I took all the inks out - and holding a cloth over the hole at the bottom shook them and then wiped the contacts with paper towels.

Replaced the contacts and left overnight for ink to charge

This morning working fine - mind you it was Friday 13th

Nov 13, 2009 | Epson Stylus DX4450 All-In-One InkJet...

1 Answer

Epson 830u Printer Red light stays on even with new ink


I realised that I had to replace both the ink cartridges even though I only wanted to replace the black for it to work. Once I replaced both the black and colour cartridge the red light went off. Thanks

Feb 11, 2009 | Epson Stylus 830U InkJet Photo Printer

2 Answers

Epson DX4450 printer


What about it? Huh? Give us a clue will ya? You want to know how to do it? When to do it? Or are you telling us you are doing it?

Put some detail in your posts please. And why post it under a generic problem for all printers. It's fairly obvious your problem relates to an Epson DX4450

Jul 16, 2008 | Printers & Copiers

Not finding what you are looking for?
Epson Stylus CX6600 All-In-One InkJet Printer Logo

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Printers & Copiers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Cindy Wells

Level 3 Expert

4756 Answers

Are you an Epson Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...