Question about Jensen LXA300 Car Audio Amplifier

2 Answers

Should I use this Jensen LXA300 AMP to power my DS930 kicker 6x9's

Eventually I want to get a nice 4 channel amp to run my 6x9's and kicker ks components, but for now I have the jensen lx300. is it mainly a low amp? how good is gonna work for mids and highs? plus should I use my outputs on my crunch 1000watt powerzone 250.2 or run a whole other rca cable? my kenwood hu has two outputs; one for lows and one for mids and highs. I want the best sound I can get from my system. oh fyi; I am driving 2 kicker cvr's with the crunch. someday, I'll put bigger nicer amps in, but for now I cant afford it. any help appreciated, thank you.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

I have a jensen LXA300 with 2 cvr's and their in a imported box it sounds prety good

Posted on May 14, 2010

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 35 Answers

I have a 2 channel boss amp running my 6x9's & a candence 2 channel on my bass ..they say for ur mids & high's a 4channel is best , but i like the 2 channel better ... so i think u wil be fine with the amp uhave , just be sure 2 tun it down so it wnt blow ur 6x9's...

Posted on Jul 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a kicker zx350.4 for door speakers and the amp keeps cutting off once the bass hits hard or i have it aloud , once i put the volume down or bass low it comes back to normal and amp doesnt get hot at...


kappas are 2ohm. You are running that amp at 2ohms stereo on front and rear channels. That is a nice amp, but it is a thirsty one. If you have a sub amp as well, then you are not supplying your amps with enough power. drop down to 0 gauge and see if it heats up anymore. Also, try going high pass if you have subs. If you don't have subs. You need to run 4 gauge and make sure you have a great ground.

Oct 31, 2014 | Car Amplifiers

1 Answer

Amps turn off and cut out


You just gotta get your gains set up right. Look Up "How To Set your Gains with a Multimeter" your over powering your subs or speakers and your amplifiers cant keep up. you also have to make sure your speakers are wired to the right ohms. your amp cant handle. if your amp cant handle, for Example:1 Ohms your gonna blow your amps. ......Speakers and subs are a science too.

Dec 27, 2012 | Kicker 10DX5001 Car Amp

1 Answer

I want to no the ohms of Jensen LXA300 2ch. 300w amp


Specifically it's 50x2 rms at 4 ohms stereo, 75x2 rms at 2 ohms stereo, and 150x1 at 4 ohms bridged.

May 23, 2011 | Jensen LXA300 Car Audio Amplifier

1 Answer

It says 75 watts rms per channel. what would the power,when u 2ohm load each channel?


If your amp is 2 ohm stable it will do 75 rms to both sides maybe a little more.

Apr 13, 2011 | Jensen LXA300 Car Audio Amplifier

1 Answer

I need a wiring diagram for the jensen lxa400. Pushing 2 kenwood 6x9 (200 watt rms each) and 2 dual voice coil 12's (300 watt rms each) in a truck box. Everything is 4 ohm. Thanks, Curtis


you shouldn't need a diagram all you need is these items here.

purchase a 4gauge wiring kit

run a a power line from battery to amp with a in line fuse 6in from battery.

run a ground from car frame to amp. ( scratch paint and screw it down with an eyelet for good contact)

run a remote from radio to amp.(blue wire)

run rca's from the radio to the amp ( sub input on back of radio)

finally connect your speakers.

Mar 26, 2010 | Jensen LXA400 Car Audio Amplifier

1 Answer

I have two 12 inch rockford p1 punches powered by an 800 watt sony explode amp (2 Channel) and i want to install another 15 inch kicker with a 1200 watt amp not sure the model, i got it from a friend and...


I have a similar setup & I just run the second amp straight off the other amp by running positive & remote wires directly from 1 amps positive & remote inputs to the others amps inputs. But my head unit has RCA inputs, (sub in & front & rear inputs) so from my 4 channel amp I run 2 6 inch alpine S's to the front to the front RCA inputs of the head unit, & 2 Pioneer 440w 6x9 inch speakers to the rear inputs. & my 800w 12 inch sub from my 2 channel amp to the sub woofer inputs on the head unit. Has blown my eardrums for nearly 12 months now great stuff! Hope this has helped

Mar 12, 2010 | Sony Car Amplifiers

1 Answer

Similar prob.did the 12 steps on how to install amp(jensen4100,blue).red protec light comes on when starting car then goes out and is not followed up by the green protec light .green one never comes on....


If you are running a set or a single subwoofer with the jensen amp than you will want to hook up the rca cord to the subwoofer rca connection on the back of the stereo unit-the other rca outputs are there in the event that you want to run a 2 or 4 channel amp to power the speakers that are generally located in the doors or back deck-with that set up properly you would still be able to adjust the balance and the fader just as though you were powering the speakers with the deck. Pug the free ends of the RCA cord into the input rca receptacles of the amp- the stereo now will feed a signal to the amplifier that only contains bass - good luck

May 16, 2009 | Jensen LXA300 Car Audio Amplifier

1 Answer

2 channel amp to 6-6x9 wiring diagram


Hello magoocsl,

Yes, with the use of 2 high-pass and 1 low-pass crossovers, that Kicker amp will operate in what they call stereo and mono simultaneously (SAMS). You'd run 4 of the 6X9's in mono. Wire them in series-parallel with a low-pass crossover on the positive leg to the amp. The amp would see a 4ω load. The other two 6X9's would be wired as stereo, one to each channel with a high-pass crossover. Again, the amp sees a 4ω load.

Here's a link to the appropriate wiring diagram. The diagram is on page 5. Just substitute your 4 6X9's wired in series-parallel where they show the "mono" speaker.

http://www.kicker.com/sites/default/files/02KX300_400_500_800_2AmpManual.pdf

Hope this helps.

Apr 01, 2009 | Kicker KX500.2 Car Audio Amplifier

1 Answer

Jensen LXA300 Amp. need to known specifications of electron. part


If you remove the clamp, there will be a part number on it. Post the numbers on the transistor and we'll go from there.

Mar 15, 2007 | Jensen LXA300 Car Audio Amplifier

Not finding what you are looking for?
Jensen LXA300 Car Audio Amplifier Logo

Related Topics:

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jensen Car Amplifiers Experts

Pieter Vleeshouwers

Level 3 Expert

1416 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

10708 Answers

Trippy Tripp

Level 2 Expert

191 Answers

Are you a Jensen Car Amplifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...