Question about Canon PowerShot A80 Digital Camera

1 Answer

Can't open web site

When I've tried to open I got the answer:
This Account Has Been SuspendedPlease contact the billing/support department as soon as possible.

could you send me the solution for the E18 error

anyway thanks


Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Canon Master
  • 4,738 Answers

Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended ...

Here's some things that you can do to try to correct it. They only seem to work for less than 50% of the lens errors, but if the camera is out of warranty, they're worth a try:

Posted on Oct 05, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to an Expert (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I've had my Grundfos Up1510SU7P for about 5 yrs. Recently, it started sending scalding hot water to the faucets. Could it need a new value? I've tried to find a manual for this for any...

It sounds like thermostatic operation is not working.
I cannot offer specific repair, but can offer resources

1) Grundfos service options and warranty information + local distributor of parts and service center finder:

2) Terminal strip and capacitor replacement does not show UP1510SU$File/Luptl028.pdf

3) Open following link for recirculation system resources including some manuals, but I don't have your exact manual.
I can see your product on following link

4) Recirculation systems operate 2 ways: with thermostat or timer.
Thermostat is supposed to turn off circulation when water reaches 100 degrees approx.
Until thermostat is repaired, you can work around problem by moving slide switch to TIMER and set timer to run intermittently so temperature at faucet is moderated.

5) Adjust temperature at water heater

Upvote the help.
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Jun 01, 2011 | Grundfos UP15-10B5/ATLC 1/25 HP ...

1 Answer

E18 error message

check the link to repair and understand the e18 error which is a lens error i Have answered the question before and have copy pasted after the link,
If the camera is under guarantee take it back,
the lens error is that the lens isnt locking properly, to do this (and this is going to sound nuts) you must take the battery out wait 2-3 minutes then whack the camera (side) on a hard surface like a solid wood desk( not too hard), this will help unblock the lens to close/open correctly),
this is a fault with this particular model and its going to continue happening to you,

Aug 01, 2010 | Canon PowerShot A510 Digital Camera

2 Answers


Lens Drum gear broken so that it flash E:18,it need to replace

Mar 18, 2010 | Canon PowerShot A400 Digital Camera

3 Answers

It says e18 on the screen

a chip on the boar has burnt out

Oct 18, 2009 | Canon PowerShot A80 Digital Camera

1 Answer

The camera was dropped by my son, which happened before, when turned on the canon logo shows then the screen is black. An error message in the bottome left says E1b or E18. Help!! thanks

Here is some information on the E18 error:
A repair guide (suggestions)
Forum for users with the same problem

May 21, 2009 | Canon Cameras

1 Answer

I have a canon power shot a410 model and yet it has a E18 error,, can u help me fix this problem???

Here is a web site that tell you all about the error and how to attempt to fix it. If this has been helpful to you , Please vote.

Dec 20, 2008 | Canon PowerShot SD630 Digital ELPH / IXUS...

1 Answer

Have a powershot sd550

After many complaints Canon posted this on their web site: "The E18 error code may be displayed if you apply pressure to the zoom lens, lens barrier or surrounding area when handling the camera. Hold the camera so that your fingers do not touch the zoom lens."
There is a lot you can try...
Here is a list of pages with help on the E18 issue:

Mar 07, 2008 | Canon PowerShot SD550 / IXUS 750 Digital...

1 Answer


The E18 error is fairly common. Here's some things that you can do to try to correct it. Have already fixed several cameras with this problem by using these methods:

Nov 04, 2007 | Canon PowerShot A75 Digital Camera

Not finding what you are looking for?
Canon PowerShot A80 Digital Camera Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts


Level 3 Expert

102366 Answers


Level 2 Expert

175 Answers

old marine
old marine

Level 3 Expert

2036 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides