Question about Computers & Internet

1 Answer

I was in the process of updating my Emachine W2888 when I thought about how I was going to put all the wires back in the correct place. I pretty much unplugged all the wires and now have forgotten how to put them back.

Posted by on

  • Ziggy McCroy
    Ziggy McCroy May 11, 2010

    Inside the PC, or the 'wires' in the back of the PC going to your other devices (monitor, speakers, mouce... ect.) ?



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,124 Answers

You will not have too much problems to get your cables back.
The mouse is PS/2 the green one, the violet one PS/2 is the keyboard, the USB could be placed on any port USB, the printer has only one port (LPT1 DB25) big connector if you have and USB printer is a small one. The power usually goes on the top (black wire) - The speakers into small green hole, the mic into a pink hole.

Posted on Oct 02, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I toke out my ram on my emachine e725 when i put it back trun on the computer the light come on but nothing esly does

Listen for any beeps. Are you sure you installed it correctly? They only go in one way but I listen for it to snap into place and then make sure the tabs are seated properly against the ram.

Jul 24, 2012 | eMachines Computers & Internet

1 Answer

How to do emachine recovery

emachine recovery is pretty much the same as on all pc's. Make sure your cd rom is set to auto play and the recovery process will start as soon as you insert the cd. If autoplay is not turned on, put the cd in, open my computer and scroll to the cd drive. You will see a file either called setup.exe or install.exe. Click on that file and it will bring up a screen giving you all available options.

Sep 17, 2009 | E-Machines eMachines Desktop PC

1 Answer

Auto Processing

There is nothing just update your antivirus and check your system for virus

Feb 27, 2009 | E-Machines eMachines Desktop PC

1 Answer

Emachine model W2888, wiring

this is someone more suited for a trained technician, but you can look at the motherboard, where the pins were, and you should see markings like pwr +, pwr -, led +, led -, hdd_led, etc, you will also see markings on the cords that connect to the motherboard, with the same words, pwr+, pwr-, etc, you can try matching those up..

Jan 20, 2009 | Gigabyte GA-8IE533 Motherboard

1 Answer

Canister will not release

I've done that.
There is a stem that runs down the center of the cyclone that releases the bottom. You didn't get that stem back in place. The only thing you can do is pry it open, hope is doesn't break, and put that cyclone back together correctly.

I've never broke one, but I had to pull pretty hard. Thought I was going to.

Good Luck

Nov 24, 2008 | Dyson DC07 Bagless Upright Cyclonic Vacuum

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides