Question about Pioneer PRO-119 60" Rear Projection Television

1 Answer

1992 model Rear Projection Pioneer power supply?

Power cuts off. I can unplug it and plug it back in and it will stay on for a few min. then cut off. I could repeat the procedure and it will come back on. Then cut off again a few min. later. Is this the power supply and can I even get the part??

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

Take the power supply board out and look for bad solder joints and resolder them. anything looks questionable just solder it. the power supply board cost`s 350 and up new. just dont bridge two solder joints that are not supposed to be. im in the process of fixing mine. mine will power up now that i did that but the ic`s are bad now so i have to replace them. they control the color convergance. you might have to do the same as well. get the stk392-180 instead of the inferior 110`s. hope this helps.

Posted on Nov 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My samsung led tv model un56fh6003f cuts off and power light blinks haven't been able to turn back on since the last time it cut off


I suspect you have a power supply failure. Probably time to have a tech look at it. to make sure its not a locked up internal computer issue, unplug it for a few minutes and try again.

Aug 03, 2015 | Samsung Projection Televisions

1 Answer

What's your problem?Pioneer PRO-530HD 53 in. Rear Projection Television flashing red standby light


This and a few other models like it have one real common issue:

they develop from age and heat bad solder connections all over the power board (rather large board).

My experience with them is the fix usually is remove rear cover and follow power cord to power board (a lot of plugs to mark) and remove that board----then solder every single connection on the board which by the way has some special fuses on it.

Jun 14, 2012 | Pioneer PRO-530HD 53" Rear Projection...

1 Answer

I have a 60" Sony


is the lamp light flashing? if yes, lamp needs replacement. you can buy lamp from www.sony.com/dapc

if lamp light if not flashing, turn off tv for 5 mins. then unplug for 1 min. if the same. tv needs service. check www.eservice.sony.com

Dec 24, 2010 | Sony Grand WEGA KDF-60WF655 60" Rear...

1 Answer

MITSUBISHI BIG SCREEN TV MODEL VS-60607 CUTS OFF FOR NO REASON


My mitsubishi 65in projector model # ws65807Just started shutting off it only stays on for few seconds and cuts off. I cant get it to stay on

Jul 31, 2008 | Mitsubishi WS-65807 65" Rear Projection...

1 Answer

Tv loses power


the processor on this et will shut this set down for number of reasons. a technician should be albel to read error codes form the processor to help deterine whatt is cause the shutdown

Nov 02, 2007 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

Pioneer PRO-710HD 64 in. Rear Projection


could be your projection lamp.. check the manual for how to check

Oct 01, 2007 | Pioneer PRO-710HD 64" Rear Projection...

1 Answer

Tv cuts off and on.


Sounds like a bad SSB(small signal board) module. Better take it to a RCA AUTHORIZED service center.

Sep 06, 2007 | RCA D56W20 56" Rear Projection Television

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

yadayada
yadayada

Level 3 Expert

61129 Answers

zorbrack

Level 1 Expert

19 Answers

Are you a Pioneer Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...