Question about Mitsubishi WS-65907 65" Rear Projection Television

1 Answer

Mitsubishi WS-65807 blinks '22'

I have a Mitsubishi WS-65807 65" rear projection TV that just decided not to power up anymore. When you turn the power on, the led lights and then the set turns itself off.

I researched the problem and fout out how to 'read' the error, and it's blinking a '22'.

I pulled the center board and checked pico fuses F9A04 and F9A05 and they appear to be blown. I plan to replace both of those, and I suppose I should replace the STK392-570 convergence ICs too?

Any help would be appreciated!

Posted by on

  • RelmDrifter
    RelmDrifter Dec 13, 2008

    I also have code 2-2 with power on it turns off in 1-2 sec. no picture. I haven't found the ic chips yet but I did find the pico fuses. I'm going to test the fuses, but everything I've been reading says to replace the ic chips and any open fuses.
    Hope we can get a sure answer. A lot of forum topics just end with no result :(



1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

I replaced the pico fuses and the convergence IC's. fuses poped right away code 22 . Further inspection of the board showed the coolant had leaked out of the center projector and fried the board. Not willing to pay $300. Passed it on to someone else

Posted on Nov 18, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Add hdmi port to mitsubishi ws-65807

I doubt it as it was never designed for that kind of input, Component works best on this set and it should have only one HD input for a box marked in the menu as DTV.

Dec 13, 2012 | Mitsubishi WS-65807 65" Rear Projection...

1 Answer

I just got a WS 65807 from a family member who didn't want it anymore. By the time we moved it to our home, it doesn't work at all - no lights, no error blinking, nothing. The only thing I can notice is...

Yes,if u want put in like $400-500 bucks into the tv unit?This tv is completely dead,like have no major high voltages response to the tv at all.Mean the FBT-Flyback transformer is totally dead,that why tv have no high voltages at all,that why there is no current to the screen at all,like no blinking LED power light.Deflection circuitries sections also must be troubleshooting and replacing parts to make the tv power supply board section to sustance power for the tv to make it work.

Mar 02, 2011 | Mitsubishi WS-65807 65" Rear Projection...

5 Answers

Mitsu 65513

I also have the blinking green light problem with my WS-65513 Mitsubishi TV. I would appreciate any information you could send to help fix this problem. Thank you, Keith. elitemachine

Nov 04, 2008 | Mitsubishi WS-65513 65" Rear Projection...

1 Answer

Mitsubishi WS-65807 blinks '22'

yes the convergence Ics are what cause the two picos to be open they are both 5 amp picos. You can get the picos, the convergence ICs and the factory service manual for your model at the following link.your model is known as the V17 chassis for service manuals and you should require two STK392-570 Convergence ICs. Heres the link they provide free instalation instructions.

Oct 02, 2008 | Mitsubishi WS-65807 65" Rear Projection...

1 Answer


Good Day;

Your TV has "poor" connections on the Convergence IC's. Please get repaired B4 you have total part failure and more costly repair.

Good Luck, big IRISH.

Sep 28, 2008 | Mitsubishi WD-52725 52". Rear Projection...

1 Answer

Mitsubishi WS-65807 and blue-ray compatibility

that tv set is only good enough to receive a 1080i signal at the DTV INPUT. unless you can change the output of the blue ray it will be outputting 1080p

Mar 01, 2008 | Mitsubishi WS-65807 65" Rear Projection...

2 Answers

65'' mitubishi hd tv

Does the light blink continuously or is there a two digit sequence to it?

Jan 03, 2008 | Mitsubishi WS-65807 65" Rear Projection...

Not finding what you are looking for?
Mitsubishi WS-65907 65" Rear Projection Television Logo

388 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1213 Answers

The Knight
The Knight

Level 3 Expert

74887 Answers

Jaime Hernandez

Level 3 Expert

2326 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides