Question about PC Desktops

1 Answer

MY SAMSUNG R60 LAP TOP WONT WORK.. THE USER GUIDE IS INSTALLED IN THE COMPUTER SO I CANT ACCESS THAT! IT IS DISPLAYING A RED LIGHT WHICH I THINK MEANS THE BATTERY IS FULLY CHARGED??? BUT NOTHING HAPPENS WHEN I PRESS THE ON OFF BUTTON.. MY 2 YR OLD GRANDAUGHTER HAS BASHED IT VERY HARD, ON THE KEYBOARD THIS AFTERNOON, WHEN I RESCUED THE LAPTOP I DISCOVERED THE PROBLEM....THANKS IN ADVANCE

Posted by on

1 Answer

My samsung laptop is green when charged, red when charging.
try turning it on with the power adaptor plugged in and the battery removed.
if this works, i assume your battery is damaged

Posted on Oct 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I don't know how to open the media card reader on the top of my Gateway LX 6200-01. I've tried pressing down and it doesn't work. Can anyone help? Thanks!


plrase read thru and you will be on your way

The user's guide for Gateway ® branded desktops is installed on your hard drive. To access the user's guide:
  1. Click Start and then All Programs
  2. Click on the GatewaySystem or Gateway Documentation folder
For desktops that shipped with the Microsoft® Windows® 7 Operating System, Gateway provides an application entitled Gateway InfoCentre, which can be used to display an interactive user's guide for your desktop.
To launch the Gateway InfoCentre software:
  1. Click on Start and then All Programs
  2. Click on the Gateway folder
  3. Double click on Gateway InfoCentre

Mar 25, 2010 | Gateway PC Desktops

1 Answer

My lap top wont connect to my broadband


Download the latest drivers for your computer:
http://esupport.sony.com/US/perl/swu-list.pl?mdl=PCVRS712
there are two files there which should match your copmuter:
the network driver, and wireless.
install them on the PC and then restart. see what happens next- if you still cannot access the internet, open control panel and network connections and see what happens there. Please update me when you have more information

Jan 26, 2010 | Sony VIAO P4 PCV-RS712 3.0GHz 512MB 200GB...

2 Answers

Installation instructions for 6100 to laptop required


Here is the Setup Sheet:

Lexmark 6100 Series Setup

And...the User Guide:

6100 Series User Guide

Here is the link to download drivers if needed:

6100 Support

Click on the Downloads tab. Select the correct one for your Opeating System.

Sep 08, 2009 | HP Pavilion Media Center a1330n - AMD...

1 Answer

Wireless connection problem on samsung r60 plus


Try this:

Plug ito your router with a network plug (ethernet adaptor) in a web browser enter the router access code (192.1.1.100) or check with your router manual to access the router. once in the router add the PC to the network this should allow you to access the network at full strenght

Feb 01, 2009 | PC Desktops

1 Answer

My samsung till won't talk to my lap top


Windows Vista is the last operating system that you would want to use for legacy hardware -legacy being anything that requires a usb to rs 232c adaptor. Scripts required to make this work would drive you to an abacus. If you need to have a cash register input on a permanent basis I would recommend another operating system, even a real old computer would be easier to interface or you could use the modem output of the Samsung to connect to your laptop in a LAN configuration maybe even with a null modem connection. Vista will drive you crazy with permission denials with cries of cyber-sodomy with an analog interface directly connected. The Samsung 755 has a USB interface but since you don't have the correct input for your laptop it will be far easier to use the cash register an an old (cheap) computer with an RS 232 interface and connect it to your laptop with a wired or wireless LAN configuration. Those USB to DB9 0r DB25 or PS2 adaptors still cannot match the speed parameters that the laptop US Host controller would ever find acceptable. Windows XP or 2000 might be a consideration but Vista is already neurotic enough without interfaces it was not designed to accomodate. I hope this will save you from alot of frustration. respectfully, Steve Medley

Oct 14, 2008 | Casio Parts Cash Register PC Desktop

1 Answer

One touch recovery system


See if there is a D: partition on the laptop. If there is, you can find everything there. A service partition has been included with newer systems. You can access your service partition during the startup process
A set of recovery CDs or DVDs can be created in the Rescue and Recovery predesktop area. A CDRW drive or CDRW/DVDRW drive and writable media are required.
When the system first starts, the following message will be displayed on a blank screen:

To Start the Product Recovery program, press F11
This message will stay on the screen for approximately 2 seconds, and it will be there every time the machine is started from a powered off state. If the F11 key is pressed while the message is displayed, then the system will enter the Service partition.
Good luck.
Please remember to rate all users who assist you for free :)

Aug 28, 2008 | Lenovo 3000 N100 0768 - Pentium Dual Core...

1 Answer

I cant get my mouse pad to work after turning it off in control panel. Im on windows vista and on a lap top. Curser wont work so cant go back in to turn it on again.


Hold the Alt key and press F4. Press Enter to shut down the computer.

Once it's shut down, press the POWER button on the computer's system box to turn the computer on again and reset it back to normal.

Hope this works.

Jul 20, 2008 | Acer PC Desktops

1 Answer

My hard drive got damged and has bean replaced with a new one, I cant get operating system to work more than 30 days. I have installed vista using a reboot disk that came with lap top. The lap top worked...


I AM CURENTLY AWITING ANOTHER REBOOT DISK AS THE MANUFACTUERS OF THE LAP TOP SAID IT MIGHT NEAD THE FULL INSTAL OF VISTA HOME BASIC AND NOT JUST THE REBBOT PROGRAM VERSION I GOT WITH THE PC. AS THIS DOES NOT INCLUDE THE START UP SETINGS THAT CONFIGS THE BIOS TO USE VISTA. ( I DIDNT UNDERSTAND THIS TILL I ACTURLY GOT INTO THE BIOS) THE NEW DISK WILL ASLO INCLUDE A NEW PRODUCT KEY THAT DOES NOT NEAD TO BE CONFIRMD VIA INTERNET TO USE AS IT IS JUST THE BASIC VISTA PROGRAM THAT SHOLD ALOW ME TO INSTAL MY UTILITIS AND DRIVERS TO INSTAL THE MODEMS AND OTHER SYSTEM FILES. WHEN I ORIGANLY GOT THE LAP TOP IN 2007 THE REBOOT &RECOVERY DISKS ONLY HAD THE SET UP PROGRAMS THIS ALOWS YOU TO INSTAL VISTA OPERATING SYSTEM BUT NOT ALL THE PROGRAMS WILL WORK AS YOU NEAD TO DOWNLOAD THE FULL SYSTEM SETINGS. SO JUST TO LET OTHERS KNOW IF YOU GOT A LAP TOP OR PC THAT ONLY HAD A REBOOT DISK TO CHEK THAT IT IS THE FULL VERSION ( NEW VISTA RECOVERY 2008 ) AND NOT THE 2007 ONE

I WIL LET YOU KNOW HOW I DID IT IF THIS WORKS

THANKS FOR THE OFFER
LIL ANDY

Jun 28, 2008 | PC Desktops

1 Answer

Samsung r60 plus notebook keyboard removal


Just need to remove the two screws on the rear marked KBD then turn the computer over and unclip the 7 tabs around the keyboard - 3 at the front and 2 either side, then carefully pull the keyboard up and towards you to release it at the back.

-Deo

Jun 11, 2008 | PC Desktops

1 Answer

I have a brother printer, Model Number HL-2700cn, serial no u60767M4S142278. I just bought a lap top and wireless broadband router. In order to connect the printer to my wireless lap top I need the IP...


The Automatic Private IP Addressing (APIPA) protocol
automatically assigns an IP address from the range:
169.254.1.0 to 169.254.254.255. If the APIPA protocol is
disabled, the default IP address of a Brother print server is
192.0.0.192. To change it, use the printer control panel (if
applicable), the BRAdmin Professional, Web BRAdmin software
or let your DHCP server allocate an IP address to the printer.
2 Refer to chapter 10 of this User’s Guide to learn how to
configure the IP address on your printer.
3 The default password for Brother print servers is access.
4 Windows® 2000/XP users can print using TCP/IP using the
standard Network Printing software and IPP protocol software
built into any Windows® 2000/XP installation.if you need manual just email me at repagenserv@saipan.com or romeo_palencia@hotmail.com

Mar 27, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...