Question about Modems

1 Answer

Siemens modem does not connect

I'm trying to enter the world of broadband but so far without any success. 'Tiscali' have provided me with a modem, installation CD and all the kit but it refuses to install. I have disabled all security software, checked all wires and have tried to re-install as directed several times. I have also tried to install manually via 'htp://192.168.1.1.' as instructions but there are no screens/directions to follow. I've even tried Tiscali help who have been no help at all!!!!!
Any ideas? I get all green lights on the modem except 'Online'. My dialup works OK and the computer says the LAN connection is open. Perhaps I'll try a large hammer!
Many thanks for your help,
Bev Blades

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 35 Answers

If you are using modem (Gateway)

Acess the GUI (192.168.1.1)
1. Set to PPPoA
2. VCI - 0 , VPI - 35
3. Enter usename and password provided By ISP
4. Select Keep Alive
5. Save Settings

-In case wont work try to unplug the modem for 10 sec. and plug it back wait for lights to be stable.
-Try to check i nternet connection.

Hope it will help you

Posted on Oct 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dataone broadband siemens adsl c2110 modem driver


Am I correct in asking you whether you are using a bsnl broadband....???? If so you don't need modem drivers. All you have to do is configure a broadband connection from your network connection wizard with your username and password. Good Luck

Jan 08, 2011 | Modems

1 Answer

I have BSNL broadband with Siemens SL_2 141 modem provided by BSNL. I want to connect it wireless with my desktop. I also have a Netgear WG111 v3 USB adapter. Please suggest how to install the wireless...


First get IP of Siemens SL_2 141, start- run -cmd- ipconfig /all
Note down Default Gateway IP address ( Generally 192.168.1.1)
Type it in Internet Explorer address bar and hit enter
put username admin, pass admin
Click Wirelles then in Basic setup, Enable Wireless, Enter SSID as BSNL, transmission mode 802.11g, then remaining option as auto, do not keep security now let it be disabled, click apply or save and rebot the router.
Install Netgear software in ur desktop let search for ssid BSNL and connect automatically. Once connection gets establish then set security WEP-PSK and put password also in Netgear u have to mention same password whil connecting.
More help here page no 97
any query revert,
Thanks

Sep 05, 2009 | Modems

4 Answers

Installing speedtouch thomson wireless st585 modem for tiscali


Installation Disks hardly work for the installation... Try to contact the Tiscali Service Provider and get the uid and the password for the network access. Once you are done with this, you need to configure the modem st585 for the internet connectivity. Check the Proper VPI/VCI with the Tiscali people. Reply back if any issues.

Oct 12, 2008 | Modems

3 Answers

Tiscali Siemens SE587 router


I have solved my problem, after researching various messageboards yesterday to try and discover why my Siemens Tiscali router didn't work. I'm going to send it back and go with another company!
It seems there has been a lot of debate on these messageboards about Tiscali and/or Siemens products and it now seems also that no one would recommend them. I hereby add my name to that list.

Aug 19, 2008 | Modems

1 Answer

How to connect Siemens broadband modem over ethernet port like HUB/Switch


First of all connect with the cable computer and your ethernetcard and phoneline to your modem c2110 and then turn on the power of your modem,then type the address 192.168.1.1 at the explorer bar.Their you will find a pop up requesting you to enter username and password,enter the admin as username and admin as the password.Then proceed and just click on configuration given on the left side of the page,after clicking three subheadings you will find first local network the other internet and the third one DSl home, then just click on the internet their you will find several things to edit but you only click on the edit button infront of where "pppoe_0_35" is written, after that just do next and next untill you will find at one place Broadbandusername and Broadbandpassword, their u enter the username and password provided by the BSNL, after that click on the APPLY button,and wait for few seconds. and then close the window,and now enjoy surfing internet.

Mar 18, 2008 | Siemens SpeedStream Modem (4100) (SS4100)

8 Answers

Siemens ADSL Modem (model SL2_141) networking


i m reset the setting in my modem
my modem no is - sl2_141
192.168.1.1 this site is not open
plz solve my prob...

Jan 30, 2008 | Siemens SpeedStream 5260 ADSL LAN Modem...

1 Answer

SPEEDTOUCH 576 WIRELESS MODEM driver


HERE is the manufacturer main link to download driver.

page also has manual on installing it and config modem properties.

 

http://www.thomson-broadband.co.uk/codepages/content3.asp?c=7&ProductID=511

Oct 16, 2007 | RCA Thomson Digital Cable Modem (DCM305R)

Not finding what you are looking for?
Modems Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Modems Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you a Modem Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...