Question about Computers & Internet

Open Question

Nas Server info wanted

Hey guys I have a few questions

Do you have a nas server?

What model is it?

Would you recommend it?

I have looked around and have been searching for the right one but prefer the knowledge of my peers over website reviews of products.

also if anyone knows of a really good affordable multi bay nas server please let me know

I need two one for my ide drives and one for my sata drive

so looking for a multi-ide and a single or double sata

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: Can't assign ip configuration to NAS 208

Run Fastora Assist, it should detect your NAS even if no IP address is assigned to the NIC(s). Make sure to connect all NIC(s).

Posted on Jan 10, 2008



the drives are set up in "X-Raid"...does that make it any more likely that the data can be salvaged...???

Posted on May 11, 2008

  • 295 Answers

SOURCE: Want to run both Raid 5 (4 drives) and a single SATA boot drive

Download the latest beta BIOS 1238. I had the same problem when adding a Samsung 1TB HDD to my RAID config. Updating to BIOS v1238 solved the Intel RAID Matrix "hanging" instantly.

You can't download it through the official Asus support page yet, but there's a topic in the Asus support forum with a link. You could also call Asus support and request the file, or just download it here: :)

Posted on Feb 07, 2009

SOURCE: I have an XP pro desktop running a VPN server. I'm

What is the error you are getting?

Posted on Jul 22, 2009

Cool_dud 09
  • 206 Answers


SATA is best for all computer applications especially in case of FASTER PERFORMANCE.
The speed rate si specified as below:

E-IDE (IDE/ATA) interface is about 133 MHz.
S-ATA (Serial ATA) is about 3.2 GHz upper limit.

Clearly S-ATA is ahead of E-IDE.
Hope this helped!

Posted on Aug 27, 2009

Testimonial: "Cheers mate very helpful."

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Why i can not find server to get on line

Home server?NAS? need a little more info.

Feb 28, 2015 | Computers & Internet

1 Answer

Why has my nas server degraded

Please check the health of the storage attached to it through the software.

Aug 08, 2014 | Freecom Computers & Internet

1 Answer

Booting fail

hola engo el mismo problema de booting fail he optenido ecte nas en ebay con dos discos de 1tb y este no funciona he echo casi todos los pasos del manual de instalacion precionando el boton de encendido mientras preciono el boton de flecha derecho e izquierdo entra en modo netboot y hay logro configurar la ip en el siguiente paso con el programa nas etector me dice que actualice el firware,pero no tengo forma de hacerlo ya que para ello tengo que tener acceso al nas y no puedo de ninguna forma gracias a quien ayude a solucional este fallo

Feb 01, 2013 | LG N2R1 - NAS server (S7636797) Network...

1 Answer

SMC NAS password

We have this product but can not be used for requesting a serial number. and we lose the serial number. thanks for help

Mar 15, 2012 | SMC TigerStoreTM SMB NAS Storage Server...

1 Answer

Windows vista is not detecting lacie network space 2 i am trying to install a lacie network space 2 (1T) on a home network. i use windows vista icw avg free virus software. i installed the latest...

In your office network, for sure, you have a DHCP server who gave the IP addresses to all devices for that network and this seems to be the reason for why you could see your NAS. On home, you also need a DHCP server. You don't say anything about you home network. The best idea is to just make a temporary network with 2 devices: your computer and your NAS by connecting the NAS directly to your computer's network adapter, set the IPV4 IP for that adapter to the same class addresses as your NAS was set by default (usually NAS had "192.168.x.y" where "x" could be 0, 1 or 2 "y" could be any value between 1 and 254, but mostly, 1) and try to access it via http to manage him (need a user name and a password). For NAS default address and username and password, consult NAS user manual. Access it with from your preferred browser using: \\192.168.x.y
Once you gain the control, cut off his DHCP service and tell him to accept the IP address from the network defined DHCP. (btw: one normal DHCP server is allowed on one network! Cascaded DHCP also is allowed, but it's a little bit complicated)
Good luck!

Jun 25, 2011 | LaCie Space 2 (301515EK) 1000 GB Network...

1 Answer

Hi, few days ago I bought a Netgear NAS 2110 and connected it to my Netgear WNDR3700 router. I installed RAIDar utility and followed the instructions. Everything seemed to work alright. From my laptop I...

If it's new it's probably doing some housekeeping. The drives need to be formatted and then the RAID arrays need to be sorted.

On installing my server, it took days to complete, however, that was with existing data on the drive.

It might not be letting you switch off because it's busy and doing so would mess up what it's trying to perform.

If you don't want to wait to find out if all is OK, go into the configuratio utility and set just one drive up. This will show if it's working as a unit. If all is fine, install the remaining drives, maybe one at a time.

Dec 30, 2010 | NetGear ReadyNAS Duo RND2110 NAS server...

1 Answer

Good morning. I have installed in my Company a Iomega nas model 450R. This morning after a reboot,it seems it can't find the boot disk and the nas asks for a operating system restore or go back to factory...

It seems that the main hard drive in this server either went bad, had a windows corruption or that one of the internal connections inside this server went bad.

You would need to check on all three of these areas to make sure 1) the main hard drive is functional (which is my first suspision so check the hard drive for errors and if it fails you would need to do a data transfer to a new hard drive). 2) use your windows software to repair the dammaged registry that may have been corrupted somehow (only do this if the main server's hard drive passes its hardware tests).

You would need to run the original os but I would need to know which one you are using to guide you more to solving the regisrty issue.

3) Hopefully tis server has a warrenty and it may need replacing if all else is working.

Try #1 which is the highest supected for failed hard drive issue (remember if discovered that main hd is bad you may need to perform a data transfer immediatly and replace with a new hard drive.

any other questions please write back with status :)

Mar 19, 2010 | IOGear Computers & Internet

1 Answer

I lost bios admin password in hp server dl380 g i want clean password without Remove the server cover. please help me.

Mfraid the only way to erase a BIOS password is to open up the case and remove the battery from the motherboard.

Aug 08, 2009 | HP ProLiant DL380 G5 Storage Server 9TB...

2 Answers

Can't assign ip configuration to NAS 208

Probably the NAS got the same IP address of the router/switch. Something like Try changing your router default IP address to Look for the NAS now.

Dec 22, 2007 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides