Its kind of bad but there are a few things that could have happend the lcd broke (if a lcd is broke or not connected you will get left and right movment on xmb but on far left you will hear infinit down press. this is a sign that ether the lcd needs to be replaced or the main pcb / motherboard as well. replacing the screen might only resuult in still a blank screen when the psp impacted it damaged the fragle id storage keys see your psp is always on even when its off to insure the system is not compermised if you remove the main battery on the mother board and wait for 30 - 60 seconds you will have reset your settings and the screen might work. this is only if it still boots. if it dosnt boot you need to replace the board.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I guess we have a BRICKED PSP here.
Well, if you got a PSP Board that can be recovered from bricking, try doing this;
1. Totally turn off your PSP by removing your battery and putting it back.
2. Press and Hold "R" button while switching your PSP on.
3. If Recovery Menu appears, click the recovery boot option.
If there is no Recovery Menu, your second option is to try Unbricking your PSP using PANDORA Battery and a Magic Memory Stick.
Since ChickHEN is out PSP-2000 owners with a TA88v2 or less or a TA90v1 motherboard now have the option to now install Custom Firmware without the need of a Pandora battery.We have put together a Easy installer that contains everything you’ll need. Hellcats Recovery flasher, ChickHEN, PSP firmware update 5.00. ********************************************************************************** Warning make sure you only try this on a PSP that will accept PSP Custom Firmware flashing (Custom IPL) otherwise you will brick your PSP!!! PSP-3000’s will not take CFW. Check your PSP will take CFWhere. Or run ChickHEN first, then when ChickHEN is loaded run PSPident from the Game XMB menu. (PSPIdent with install with this easy installer) Steps to install CFW on a PSP Slim without a Pandora battery. *********************************************************************************** 1. Check and triple check you have a hackable PSP that will accept custom firmware flashing without resulting in a BRICKED PSP. Make sure you have a PSP with a TA88v2 or below only + or TAv90v1. If your PSP has a TA88v3 or above or is a PSP-3000 DO NOT proceed!!! You will brick your PSP. Run the installer and point it to your Memory stick Pro Duo root. 2. If you don’t have don’t have PSP firmware 5.03. Get that here: PSP Firmware 5.03 Make a folder called UPDATE in your PSP/GAME folder and place the eboot in there on your memory stick pro duo. 3. Now lets run ChickHEN to have a homebrew enabled environment. In your PSP go to photo then click the ChickHEN photo and wait. If the PSP jams, please retry. If it flashes colours and reboots you have loaded ChicKHEN. Check your system info to be sure it say’s 5.03 ChickHEN R2. If you need help getting ChickHEN to run please visit this post. 4. Now with your PSP rebooted in ChickHEN go to your PSP XMB game menu and run Hellcats Recovery and install 5.00 M33!!! Your PSP will reboot, follow the instuctions to install PSP Custom Firmware 5.00 M33. After your done you can update to 5.00 M33-6 Easy ChickHEN CFW installer (Without Pandora) (27.9 MiB,)
Turn the PSP off and remove the battery and battery cover. Remove the two screws underneath the battery. Remove the other two screws on the opposite side of the battery. Remove the final screw on the bottom edge of the PSP.Grasp the PSP on both sides with each hand and pull the cover off of the PSP. Locate the button bar on the bottom front of the PSP. Use your flathead driver to lift up the left side of the button bar until it pops up off the LCD support. Lift the button bar cable tab upwards to remove the cable and remove the button bar.Insert your flat driver into the small space on the left side of the LCD screen between the the LCD housing and the LCD mounting bracket. Twist the screwdriver slightly and the mounting tabs will pop out. Gently remove the other side of the LCD after popping out the first side tabs. Bend the PSP screen all the way down until you can see the backside of the screen. Lift up the flex cable connectors and unhook the cables that connect the screen to the PSP motherboard. The tabs are brownish in color; they are very fragile, so be gentle. Lift the PSP screen out of the housing and place to the side.Place your new PSP screen into the PSP, face down like you had the older screen after popping out the mounting tabs. Connect all of the cables from the PSP screen into the motherboard tabs. Fold the screen back into the bracket, snapping it into place. Place the button bar back onto the LCD support, connecting the last cable. Place the cover back onto the PSP and tighten screws to finish.
What is your firmware version? Are you using CFW or OFW?
There is a problem in your update that could have trigger some of your flash0 files it is where your firmware files are placed. Or maybe your firmware does not support Crisis Core : Final Fantasy 7?
If you are on CFW (Custom Firmware). Try loading the recovery menu in boot set-up. Just turn off your psp (not in sleep mode). Leave it for a second or two, then turn on your psp while holding the R trigger. If you are able to load the recovery menu, then you are semi-bricked. If not, only black screen then you are fully-bricked. You will not a PANDORA kit, with a pandora battery and magic memory stick to unbrick your psp.
There may have been shock inflicted on the PSP causing it to break the LCD which is fairly easy to do as they are fragile. If you are courageous you can buy a new LCD screen for it of the internet then open the PSP and swap the LCD screens.
The worst thing that can happen to your PSP is a damage to your built-in liquid crystal display (LCD).You have 2 options, either replace the screen with a new lcd screen or buy a new PSP console. But before you go out to buy a new PSP console, think about buying psp repair parts like a PSP LCD screen replacement.Most of the lcd monitors are new, new pull, used pull or refurbished. So you have to ask your vendor if the lcd replacement that you are buying is new.If it is new the quality is and must be perrfect.Pull parts come from other used or unused PSPs that have being broken down for parts and may have some scratches.Refurbished parts are used parts that have being repaired to bring quality level close to a new but most vendors that are claiming to have refurbished PSP screens actually do not, so reject that option. Always ask for guarantee, most vendors will give you a 6 month.
please refer to the link www.pdasmart.com/psprepair.htm