Lost my disk to install my printer office jet k60

Yes a normal Printer USB cable (2.0) will work.

push the auto awnser button on the printer to receive faxes

Hi there,

• Unplug the printer cable from the computer.
• Unistall the printer drivers from Device manager and also unistall the all the printer appications
• restart the computer
• try to download drivers from the website
• after installing the cannon drivers and software it will ask you to connect the printer. 

• then you can connect the printer and print a test page.

Hope this help. Please Rate My Response! Thanks! 
Prem    

You can go to http://www.hp.com/#Support and then click on download drivers.
It will ask you for your printer model and give you the option to download your drivers

This printer is supported in Mac OSX. All you need to do is plug it in, and Add the Printer in System Preferences. The driver is an open source driver called Gutenprint. It is already installed on your computer, so the Add Printer should find the drivers nessesary by itself.

Download software from » Software & Driver downloads

You have to have either a dedicated phone line just for the fax --or-- pay your phone company approximately $2 a month for a service called Distinctive Ringtone. This service will ring a certain way when you have an incoming fax. You will then configure your fax machine to pick up when this distinctive rington is heard. The ringtone is usually two or three quick rings. Your fax machine's settings will have this setting.

Unfortunately, you can't just plug your fax machine into your phone line and start sending/receiving faxes. Look through your fax machine's manual regarding the distinctive ring service. Good luck!!

you can use the printer by itself , but if you want to hook it up thru the computer , then youre gonna need a special cable that connects on one end to the printer and USB connector at the other end , then your gonna need the installation disk that comes with the printer, but Im guessing you dont have the disk , but dont worry , it can be download thru the HP website , heres the link : http://welcome.hp.com/country/us/en/support.html , this will direct you with support, click where it says DOWNLOAD DRIVERS and SOFTWARE , and on the white box, you gonna write officejet k60, and follow the steps from there , hope this helps , please rate AJ

I'm assuming that you have Windows XP. If not, click on Software & Driver Downloads to access support for other operating systems. http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&cc=us&dlc=en&product=59273&os=228&lang=en&

In the process of alignment there are two phases:

1. When the message comes to align the ink ..press ok and the page is printed out.

2. Once the page is printed then place the page on the scanner glass and tehn scan the same.

Follow these two steps in the same order and it will never give Align Ink Cart message again.