Question about Drills & Drill/Drivers

1 Answer

Fuji Invertor FRN18

Help !!!!,
I have an AJAX CNC Lathe which has 2 invertors on it - FRN18/5PD5-2 AND FRN18/5VC5-2.
The alarm keeps coming on and shutting down the machine.
The Distributor for this machine cannot get new invertors or fix the existing invertors.
Can you please offer a solution. I would be very grateful.

thanks

Peter

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

Based on your post, the local distributor of the AJAX CNC Lathe can not repair nor replace, then perhaps you should try to go direct to the systems manufacturer.

  • Fuji Electric Co., Ltd.
  • ED & C and Drive Systems Group
  • 12-1 Yurakucho 1-chome, Chiyoda-ku Tokyo, 100-8410 Japan
  • ED & C Phone 3-3211-1424 Fax 3-3211-7983
  • Drive Systems Phone 3-3211-1425 Fax 3-3211-7982
  • Fuji USA;
Alternately, you could try a local Industrial Electronics Tech. who is familiar with these and has access to a service manual or at least a schematic diagram.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Posted on Oct 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the best way to store the new ryobi 18v battery


Is your ryobi 18V battery is a Li-ion battery? if so you can store it with 40% power and keep it clean, cool, and dry. Then every 1-2 month to charge and discharge the battery for once time.
More battery tips or batteries and chargers for cordless tool you can come here:

Cordless Drill Batteries Replacement Cordless Power Tool Batteries...

Nov 02, 2014 | Drills & Drill/Drivers

1 Answer

How to open a cnc chuck that is stuck closed?


Try squirting some penetrating oil on it and wait overnight. Even if that frees it up, it's going take considerable force to move it.

Sep 03, 2014 | Drills & Drill/Drivers

1 Answer

Hi i have a litnium mkita 18v lxt cordless drill i have 2 batties and all 3 lights are staying on it wont charge its the simbal with the spaner and fan on it that comes up can you please tell me whats rong


HI, Its ok for the charger to have those lights on. If you have been using for quite some time or the batteries have had several charges then the charger will operate a service on the batteries to keep them in good condition. We have had a few take as long as an hour to service , then it goes into normal charge mode. Just leave it on to do its service and it should be fine. If there was a problem then the red and green lights would alternate flash and a siren beep would sound. Hope this was of help to you.

Jan 12, 2011 | Makita Tools 18V 1/2" Lxt Lithium - Ion...

1 Answer

Panasonic 15.6 Drill / Driver Charger Problem


What you are discribing is called a axle fuse you can find what you are looking for at this url I deal with this company alot

http://www.kenselectronics.com/lists/fuses.htm

Jan 20, 2010 | Panasonic 15.6v Ni-mh Cordless Drill -...

1 Answer

I just bought 2 ADEMCO 5804 Key Fobs for my ADEMCO LYNXR-EN Security System. Does anyone have an idiots guide to step-by-step procedure for programming the Fobs to my Alarm? I do not have the installation...


yes i can help you who monitors ur system because your gonna need the installer code to get into programming or power down the sytem then hold down the *and # to get into programmming

Nov 21, 2009 | Ademco Drills & Drill/Drivers

1 Answer

How do you use a magnetic drill ?


These normally have a flat plate that you push against the piece to be drilled. There is a switch that you then trrow which magnatizes the plate, attaching it to the piece being drilled.

NOTE, these do not usually use normal drill bits, more like lathe cutters.

Nov 02, 2009 | Drills & Drill/Drivers

Not finding what you are looking for?
Drills & Drill/Drivers Logo

Related Topics:

330 people viewed this question

Ask a Question

Usually answered in minutes!

Top Drills & Drill/Drivers Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

EugenesDIYDen
EugenesDIYDen

Level 3 Expert

479 Answers

JOHN LAPIER

Level 3 Expert

2384 Answers

Are you a Drill and Drill/Driver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...