Wharfedale LCD2710HDAF no power to tv, checked cable and changed fuse a few times, new power lead? or is this a common problem?

change the lead

Hi Alan,
Here are a few steps to troubleshoot.

1) Make sure that the new batteries are correctly installed.
2) Make sure that there is a line-of-sight between the remote and the TV while operating.
3)Not recommended- but might work. Give your remote a little shake. If there is a small circuit loose connection it will be adjusted. :P I do this all the time.
4) Buy a new remote. You can buy a universal remote which are available on the market. They are cheap. It will NOT be harmful to your TV.
OR
you can buy a genuine one.

To know more about it, you have to download the repair manual to this set. Its disassemble section will give you all details. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy.
http://electronicshelponline.blogspot.com/

If you were to shine a bright light at the screen and can see a "picture" in the background, it will probably need a new ballast unit for the backlight. If not I would look for a replacement TV.

you said you changed the fuse. (inside the tv)double check to see if its blown agian if not. keep it unplugged for about 20 minutes to reset the surge protector onboard . if you have done all that the fuse didnt protect your tv from the surge and it gone. IF ITS CONNECTED TO A SURGE PROTECTOR unplug it from that and plug directly into the wall TRY THAT FIRST let me know if this works.

U have a LCD tv any models?Just buy a HDMI cable,one side of cable hook to the HDMI in the Wharfedale hub,the orther side to the HDMI LCD tv hub.Power on,play the thing,go to the LCD tv,go in the LCD tv menu pick HDMI 1,2,3 will get the movie or what u playing?If the Wharfedale work.

I have a wharfedale 32 HD Ready didital LCD TV and the headphone socket does not seem to work...have used four working headphones that work on Ipods and Hi Fi but they do not work on TV is this a tv fault or do I need a mono small jack on headphone ?

Sounds like something else in the power supply. The surge inrush current could have blown the bridge rectifier. (device which changes AC to a pulsating DC for the power supply). You may need to have the power supply serviced or replaced.

hi i have had this you sometimes get a delay on the sound when you boot up i just changed my hdmi lead and it rectified it try using a 1.3 instead of 1.2 hdmi lead.