Question about Maytag Neptune MAH7500WH Front Load Washer
The start/Pause and Off button stopped working. When I look at the diagnotic chart it refers to a P7 with ribbon harness. On my circut board there is no such number. There is P6, 5, 4, 8. This is way beyond what I thought my technical capabilites are just to discover this much. The buttons stopped working. After about 4 days I decided to plug it in and try see if it fixed itself...and it did, but for only 2 loads. Any suggestions?
Check voltages at the outlet. My guess is that you are on the HVAC circuit, and the Neptune is more sensitive than your hvac equipment. Also check that the neutral is about the same potential as the ground.
Posted on Sep 23, 2007
SOURCE: maytag neptune
i have maytag neptune wash,modelo mah5500bww,my problem is: no starting,flashing start/pause button,after ten minutes is off.And now is ready for start when press start/pause button
Posted on Aug 29, 2008
unplug the washer for 15 minutes then:plug it back in and, restart a few times in a different cycle canceling each time until the door opens. Do this only if the tub is not full of water if it is let me know and, i'll show you how to drain the washer first before we try to open the door.
Posted on Jun 09, 2009
Tips for a great answer:
Jun 13, 2010 | Maytag Neptune MAH5500B Front Load Washer
May 16, 2010 | Maytag Neptune MAH5500B Front Load Washer
Jan 10, 2010 | Maytag Neptune MAH5500B Front Load Washer
Nov 01, 2009 | Maytag Neptune MAH5500B Front Load Washer
Aug 05, 2009 | Maytag Neptune MAH5500B Front Load Washer
Jan 02, 2007 | Maytag Neptune MAH7500WH Front Load Washer
Feb 28, 2011 | Maytag Neptune MAH7500WH Front Load Washer
135 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: