Question about Crosman (4032)

2 Answers

Powermaster 760 b-b repeater/177 pell. gun.

The works fine but the lever for the pumpkeeps on droping down.What can i doe too fix it ?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Go to www.crosman.com and they have a parts list that should help in getting the parts needed for replacement.

Posted on Jul 01, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

You could just put some tape on the underside of the barrel where the pump arm meets the metal. That may give you enough friction to hold it in place.

If it's a Crosman 781, you could replace part 781A031 which is the spring and peg that holds the pump arm up. http://www.crosman.com/2004/pdf/manuals/crosman/781/C781-EVP.pdf

Posted on Nov 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is an older powermaster 760 bb/pellet gun worth in ok condition but not holding air


well just seeing it's old might make it worth about 50$ for a collector to buy, but to actually use it might be worth about 10-20$ the best thing to do is 1. put it up in a local newspaper for sale or 2. go to Gunbroker.com and put it up for auction. Personally I'd say gunbroker, you have no idea how much money people make on there for selling things like Redryders and older guns.

Jan 24, 2010 | Crosman (4032)

1 Answer

397 Ben/Sher .177 air rifle - installing repair kit problem


Crosman bought out benjamin / sheridan, and they still repair just all their pump guns. The ring sounds like a piece of a pellet, the barrels are silver soldered to the bottom tube, Not lead. Also, the repair kit should not have too many parts, you can only go so far with those guns before needing special equipment to get them apart. Get a hold of Crosman and tell them that benjamin sent you a bad part. They should fix it.
I had an old Benjamin Franklin in .22 cal, it was just a brass tube with a stock and barrel. I sent it to them, to be repaired, and I wanted the .22, because I had the 5mm and the 177. So I got it back, cost $29, New barrel, in .177, soldered on, new guts, new paint, trigger, bolt, the works.. Brand new gun. I told them I wanted the brass and I wanted the .22, They said oops, sorry. I didn't complain, nice old gun. Hope this helps.

Jul 29, 2009 | Crosman (4032)

3 Answers

My .177 66 powermaster will not pump right


TRY PUTTING A LITTLE OIL ON THE SEAL ON THE PUMP LEVER . OPEN THE PUMP HANDLE COMPLETLY YOU SHOULD SEE A SEAL THATS WHAT YOU OIL.

Jul 11, 2009 | Crosman (4032)

3 Answers

I took apart my 66 powermaster bb gun and i cant put it back together? can u give me a diagram of picture


66 pdficon.gif
C66-OM
pdficon.gif
C66-EVP & PL 1 & 2
Powermaster. Pneumatic, BB repeater, .177 cal., single shot pellet. First variant w/zinc receiver. 1983-1988 Some parts are available. 66 pdficon.gif
C66-OM
pdficon.gif
C66-EVP
Powermaster. Pneumatic, BB repeater, .177 cal., single shot pellet. Plastic receiver. 1988-2001 Some parts are available. 66 pdficon.gif
C66CLIP-OM
pdficon.gif
C66CLIP-EVP
Powermaster. Pneumatic, BB repeater, .177 cal., single shot pellet. Plastic receiver and 5 shot manual clip. 2001-Present Some parts are available
HERE IS MANUALS I FOUND..HOPE THIS HELPS..

Apr 11, 2009 | Crosman (4032)

1 Answer

I can't arm my rifle 66 powermaster


there is a slot that says open open it and put bbs in.. close it ther is a switch on top pull it back... turn the gun upside down and shake it... push the button up... pump 3-15 times and pull back bolt... and push forward thenturn safety off and shoot

Apr 07, 2009 | BSA Air Gun Scopes

6 Answers

Crosman Powermaster 760 pump bb gun won't hold an air charge


Take a look on amazon Amazon com Crosman Powermaster 760 pump and take a look for replacement. have a nice day

Feb 12, 2009 | Crosman (4032)

1 Answer

Play in the barrel


You can send it in to crosman with $14 and they will send you a used gun. Yes, they are used but at least they still work.

Feb 03, 2009 | Crosman (4032)

2 Answers

Bb gum wont pump up


Open the pump arm (fore stock) all the way and check the rubber O-ring for cracks. If it's just dry, get some Pellgunoil® Lubricating Oil or the equivalent from a gun/sporting goods store and oil it.

Sep 16, 2008 | Crosman (4032)

4 Answers

CROSMAN 760 PUMP PELLET RIFLE REPAIR


How do you change the air cylinder

May 26, 2008 | Crosman (4032)

Not finding what you are looking for?
Crosman (4032) Logo

Related Topics:

1,713 people viewed this question

Ask a Question

Usually answered in minutes!

Top Crosman Spotting Scopes Experts

Brad Brown

Level 3 Expert

13542 Answers

raysaw

Level 2 Expert

223 Answers

jr3261

Level 1 Expert

42 Answers

Are you a Crosman Spotting Scope Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...