- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The printer driver comes on installation CD when buying a new copier. If you are using it as a printer, insert the CD inside the CD-ROM drive and click open the file written set-up and follow on-screen menu. Connect the USB cable when prompted to finish your installation. Now you can print using your Sharp AR-5316 and that is the driver for it.
Yes that is possible. Did you plugged the usb cable during driver installation ? During driver installation the usb cable must not be plugged. after the installation step asks you plug it in, then you plugged it. If not, the system wont recognized your printer. Be sure to uninstalled the previous installation before you re-install the driver
According to sharp information the 5316e is not supported by Vista, the 5316n version is ( N for networking). They would require different drivers because they are different in the way they print. However, here is a link for a vista driver for the "E" version. This is for 32bit vista and not 64bit. http://esupport.sharp.at/html/driver/DataOutputDetail.php?TemplateLang=en&ID=3758 You are more than likely going to be connecting to the copier with a USB cable. Install the software first and plug in the USB cable. Hope this helps.
1. Uninstall the previous driver
2. Re-install the driver ( do not connect the usb cable at this time )
3. After driver installation, the pc will ask you to connect the usb, do this and it should be OK
If your system is running Vista, then U cannot install your sahrp copier for now until their is a compatible driver for vista. But if U are using windows XP, then try downloading the Copier's driver from sharp.com