Question about Kenwood KDC-135 CD Player

1 Answer

Unit on standby

Hello....my name is Tim. I have this Kenwood deck. I can not listen to my xm radio because the auxilary mode is on standby. I can listen to cd's and the radio but not the satellite. How do you get the deck to go off standby?? thanks

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 113 Answers

Hello Tim-----your radio has menu options that can be changed- one of these turns on your aux port. to access this GO TO www.kenwoodusa.com on the top of the page click on support then on the left side of the page click on user manuals now on the right side of the page type in k and then scroll down until you get to your model (kdc135) -----on pages 12-13 you will see the instructions to turn on the auxilary mode. If you have any problem drop me an E-Mail at merle840@aol.com


Good luck


Merle

Posted on Oct 01, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Kenwood stereowith A-58 Amplifier, no manuals, so can't set up


mine does the same and it cost 100 pounds to have the output chips replaced

Apr 08, 2009 | Kenwood Audio Players & Recorders

1 Answer

KDC-MP532U (Lost ESN # ??)


That will be a problem with the XM box you connected to it, call xm see if thay can help, the radio is just liike a screen for the XM nothing more the box controlls all of it.


Don

Jul 09, 2008 | Kenwood KDC-X590 CD Player

1 Answer

Changing channels with XM radio


Push the button just to the right of present number 1 and this switches the setting between scan and scroll while in XM mode.

Jul 02, 2008 | Alpine CDA-9883 CD Player

1 Answer

Question about sirius radio for kenwood cd player


You can try it, but I think you might need a media expander/controller. I see some going for around $100 on Ebay. It allows you to add and interface many component to your deck. But make sure the deck ready to control it. You can tell by the label on the deck(Ipod ready, XM ready, Sirius ready, Changer ready....ect). Goodluck.

May 09, 2008 | Kenwood KVT-717DVD Car DVD Player

1 Answer

Help


when its on standby hold the menu button and then use the right nob to change aux on then press menu again and src untill aux shows. hope this helps

Apr 10, 2008 | Kenwood KDC-MP235 CD Player

1 Answer

Xm?


You will need to purchase the XM antenna ( GXM-30), and also purchase the service.

Jan 15, 2008 | Kenwood DNX7100 Car Video Player

1 Answer

CD/Aux play


for the "AUX input" source put it in standby mode and hold menu... scroll down to "aux in" and turn it on by pushing right

Nov 10, 2007 | Kenwood Excelon KDC-X789 CD Player

1 Answer

Flashing PROTECT


This is often caused by a problem with the speakers or speaker wiring. A speaker wire that's pinched behind the head unit will cause this problem if it's shorted to dash metal or the deck chassis. The first thing to do is remove the head unit and inspect all the speaker wiring for bare spots or pinched spots. If everything looks okay, disconnect all four speakers from the deck and switch it on. If it still shows "protect" then you have a defective head unit. If not, then turn it off, re-connect one of the speakers, and turn it on again. Continue until you find the speaker output that puts the deck into protect mode.

Jun 25, 2007 | Kenwood KDC-MP4032 CD Player

Not finding what you are looking for?
Kenwood KDC-135 CD Player Logo

297 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4886 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

77202 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...