No power test and reset buttons work, but no power. light does not come on and iron does not warm up. Work when i first got it.

test the c.breaker reset from the wall if use c.breaker wall, or from the service panel c.breaker.
Some times the power cord has c.breaker to reset the button red too.
God bless you

I have this iron about 2,5 years, work a few times. when i shut down the steam generator the iron stays on. And now in one hour of work it shuts downs about 4 times. the lights on the steam generator are week. what main board i shuld switch?

If you need it repaired, you could go to www.flatironrepairs.com. They repair CHIs.

Reset it and it will work fine! To reset it: plug it in and hold down the power button for about 20 seconds.

My malibu transformer has a reset button on the back near the terminal connections. If the transformer is on (time displays on the panel) but the light fixtures are not lit, look for the reset button on the back and depress it.

Hi,

Here is a tip that will help you to troubleshoot our iron and figure out what is wrong with it.

Electric Iron not Heating Up or not Working Right
http://www.fixya.com/support/r5300202-electric_iron_not_heating_up_or_not

heatman101

Hi,

Here is a tip that will help you to troubleshoot our iron and figure out what is wrong with it.

Electric Iron not Heating Up or not Working Right
http://www.fixya.com/support/r5300202-electric_iron_not_heating_up_or_not

heatman101

press reset button

Hi,

Here is a tip that will help you to troubleshoot your iron and figure out what is wrong with it.

Electric Iron not Heating Up or not Working Right
http://www.fixya.com/support/r5300202-electric_iron_not_heating_up_or_not

heatman101

well..let's check the plug..is it firmly in wall, and ** problems with the part going into the unit, as well?

does the light that shows power work on the panel, under the handle?

has the unit dropped recently?