Question about Hotpoint Aquarius WD63 Front Load Washer/Dryer

2 Answers

Hotpoint AWM320 Wont wash or spin clothes

Hi

I am having a problem with my washing machine. It will fill with water and then do one or two revolutions and that's it, no washing or spinning of clothes on any program. I would be grateful for any assistance.How old is this machine?

Regards

Seamus.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 38 Answers

Yes sounds like brushes do a serch on ebay a lot cheaper there £25 from hotpoint £7.50 ebay

Posted on Oct 05, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This sounds as though the brushes on the motor are in need of cleaning or replacement. I have had the same problem and fixed it myself. (As an engineer is exspensive.) Unplug the machine from the mains suplly and remove the back and or top to locate the motor, then look for two grahpite blocks on springs which should be easy to see, if there is a build up of fine graphite, remove them by compressing the spring with ( I used a fase tester Flat head screwdriver but something similar will do.) Clean them off and replace or if they need replaced check on line for a parts supplier shouldn't cost more than fifteen pounds and no more than a half an hour of your time to complete.

Posted on Sep 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i get to the bottom of a failure to spin clothes i a whirlpool washing machine model awm320 which is an 800 spin model


Is the machine draining properly?
Have you checked the filter on the pump? What happens when it gets to the spin part of the cycle?
Is it knocking?
Does it go through wash cycle properly?


W

Nov 23, 2014 | Washing Machines

2 Answers

Washing machine fills with water but then won't wash, spin or drain


Hi Claire if your beko washing machine wont drain or has a spin problem then you have to check the carbon brushes first.

Also check all waste pipes are clear and inspect the pump I have included this video below.

At our website I am doing self diagnostic videos on these beko's as we speak so all tutorials will be in this link below
How to replace Beko Washing Machine Motor Carbon Brushes
you might find this test video helpful but only do it if you have checked the motor

Jan 28, 2014 | Beko Washing Machines

2 Answers

Washer won't agitate it does spin the clothes


Hi


If Washing machine wont agitate there are several reasons that causes such problem,please check the bellow link to troubleshoot your issue:-


http://www.repairclinic.com/Washing-Machine-Troubleshooting?red=Washing-Machine-Repair-Help#itdoesntagitate



Please get back to us if you have further query else please accept the suggestion.

Thank you for contacting fixya.com

Mar 02, 2011 | Hotpoint VWSR4150B Top Load Washer

1 Answer

Hi. i have had funny noises during last couple of washes. now washer wont drain programs are responding fine but washer keeps filling up and not draining.water backed up and came out of the drawer hotpoint...


Hi,

Problems with a washing machine not spinning or not draining are often inter related..

If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin
http://www.fixya.com/support/r4617986-washing_machine_not_pump_or_spin

If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing machine not draining and or not spinning
http://www.fixya.com/support/r4784376-front_load_washing_machine_not_draining

heatman101

Aug 18, 2010 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

WF860 drum filling with water


Normally I would think that the problem is with the drain system (faulty pump or clogged lines), but you told me that also "When the washing machine is not bein.g used the drum slowly starts to fill with water!!" therefor I think it can be a dafective inlet valve or a faulty control assembly.
In either case, you will need a technician to fix this.

Dec 23, 2008 | Hotpoint Ultima WF860 Front Load Washer

2 Answers

My washer


It sounds like you have a faulty inlet valve or module. Hope this helps.

Oct 02, 2008 | Hotpoint Washing Machines

2 Answers

Hotpoint Aquarius WMA56 wont drain properly water leaking onto floor


pump is working water is only a trickle coming out so wont final spin

Nov 07, 2007 | Hotpoint Aquarius WMA56 Front Load Washer

Not finding what you are looking for?
Hotpoint Aquarius WD63 Front Load Washer/Dryer Logo

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

hungoverrr

Level 1 Expert

5 Answers

puggy666

Level 1 Expert

47 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...