Question about Kitchen Ranges

2 Answers

Constant clicking form gas hob after cleaning it

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Gas hob ignition keeps clicking

Posted on Mar 22, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 110 Answers

Moisture in hob top causes shorting.  Poor design.  If Kitchenaid then complain loudly to manufacturer.

Posted on Dec 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have a Sterling 1100E induction hob and have random problems with the hob not working at all, and tonight it just sits there in darkness but peeping constantly. The 2 ceramic rings work but not the


Some times the pots that you may be using are not designed for use in induction cooking. If you are, It might be the size of pot. The peeping sound might be the cook top looking for the pot. But when all else fails. Turn the stove off at the Breaker count to 12. Turn back on. Reboot. Hope one of these work.

Apr 14, 2013 | Stoves Sterling 1100E Stainless Steel...

1 Answer

Igniter switch keeps lighting after stove is off


I had a similar problem , the igniter switch on my gas hob would spark constantly. It turned out to be moisture or grease had caused the switch to short out. I unplugged the mains that feeds the ignition and removed & cleaned the switch. Cured the problem.
pete.

Dec 24, 2010 | Kitchen Ranges

1 Answer

I spilt a cup of hot coffee on the cooker hob and after a few minutes all 4 gas hobs are now flashing/clicking.


clean away all the coffie from the cooking hubs therefore allowing all the gas to pass through the jets

Nov 28, 2010 | Kitchen Ranges

1 Answer

Why does my beaumatic gas hob/electric oven keep tripping?


water has gone into back of element or oven light you will need to remove the back of the machine a check they are dry WITH THE POWER OFF

Apr 23, 2010 | Belling CookCenter 151 Dual Fuel (Electric...

1 Answer

Seized screws in Stoves 'Range 1000G Gas Range Cooker (LPG)


I let the screws soak for a few days in release oil but with no success. I decided the only way to get the seized screws out was to drill and tap new holes through the hob and into the hob burner mixing tube support flanges. This allowed new screws (stainless as opposed to the standard, chrome plated steel screws) to be screwed into place. Once this was done I then drilled out the heads of the remaining seized screws. This allowed the hob tops to be removed so that the oven thermostats could be changed. The hob screws were then screwed back into place and lubricated with loads of high temp. copper grease to prevent corrosion. I will also remove and re-grease these screws every six months or so to prevent any chance of seizure in future!

A few points to remember: (a) make sure that any holes in the hob top are sealed with something such as a screw coated with high temp fire cement etc. to prevent any possibility of unburnt LPG getting into the space below the hob top. (b) make SURE that you do not drill or tap into anything that could damage the cooker and cause a gas leak or damage any of the gas ignition leads etc. (c) Make sure that the appliance is totally 'gas tight' after doing any work which will disturb the gas connections, and (d) If you don't have gas qualifications and are not sure of what you are doing then get an expert, registered gas engineer to do the work for you. Don't take a chance with gas!!

Oct 07, 2009 | Stoves 1000DFDL Dual Fuel (Electric and...

1 Answer

Gas hob is very difficult to start. have to hold


I've just had this prob on an inherited (just moved into new house) A2. Thought I was losing the plot as followed instructions to the letter re starting gas hobs. Got an engineer in to give the ecking thing a general service & told him about the hob. He said I wasn't pressing the knob hard enough. If you press the knob enough to make the ignition click, press the knob a bit further (it will go a bit further "in" honest). If you do that it should start like a good 'un (I felt sooo daft). Something to do with magnets!! Anyway, give it a try (this works for me unfortunately I've had the damn inner glass on the main oven go pop - yes, infront of an engineer twice in less than ten days. Knobs aside, I'm starting to go off this cooker. I want to cook to eat not have a "pretty" in the kitchen!).

Apr 12, 2009 | Smeg A2.5 Dual Fuel (Electric and Gas)...

2 Answers

Rangemaster gas grill - little or no gas pressure


you can phone rangemaster helpline on 08707 895 107 spare parts or tech team.

Feb 26, 2009 | Rangemaster 110 (Gas) Kitchen Range

1 Answer

Cannon Camberley 10305G (Double Oven)


trust you have set the clock as this turns the gas supply on to the ovens

Dec 19, 2007 | GE Profile JGS968 Gas Kitchen Range

2 Answers

Zanussi gas stove


three problems with slow ignite on stoves.. first one is clean ignitors and burner caps. make sure that the caps and burners are correctly assemble. and make sure the stove is grounded correctly.. Do you flames have orange to yellow tips then there is a unburn carbon thst will form soot. soot productions is not achieving complete or efficient burning...again you may have dirty ot clogged burners..the flames should be all blue...let me know what you find out

Aug 31, 2007 | Kitchen Ranges

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

1,133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...