Question about Projection Televisions

2 Answers

TV and Vedio-Projection televisions

Samsung DLP TV HLR5067W No picture/audio Problem
I own HLR5067W TV for 2yr9mo, power plug in, "Standby/Temp" light on,
Remote "Power On", "Lamp" light blink , heard "click", fan & lamp works
( from TV back side, no noise except fan), when I press"Source" to have "Timer" light blink.
About 1 min, "Lamp" light blink off, then TV back side Fan & Lamp off, indicator light back to "Standby/Temp". No vedio/audio output at all.

I'm not sure both fans are working or just one, or Color Wheel either,
How do I identify which parts are failed before order a new part.
I worked in LabTop assembling before. Please help. thanks.

Posted by on

  • dukehans Oct 03, 2008

    It works fine for HDMI , PC only, and audio is OK except some vertical strip on all other source inputs,
    picture isn't clear, ( Direct TV, VCR, DVD ), after I had tried like this two times this afternoon, It's back to no picture/audio situation again.

  • dukehans Oct 09, 2008

    It works fine for HDMI , PC only, and audio is OK ALSO, except VIDEO with some vertical strip on all other INPUT source ( av1, av2, av3, s1, S2 etc.,) , picture
    is bad and unclear, ( Direct TV, VCR, DVD )
    Which part is defective, how to verify? Ask help from DLP TV experts, thanks,


×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

Its time to replace Lamp.
Please check Lamp advise in user manual of Samsung HLR5067W
Does TV give Lamp flashes when went to standby?
Please let me know.

Posted on Sep 30, 2008

  • Shahid Electronics
    Shahid Electronics Sep 30, 2008

    Like, if all 3 LEDs on front (Timer-Lamp-Standby) flashes, then Lamp is defective and need to be replaced.
    Please check above symptoms in your TV.



×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 161 Answers

What i would do is crack into the tv and watch the individual parts being careful not to unplug anything while you take the back panel off.....turn it on and see what happens. let me know what happens

Posted on Sep 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV lamp has been replaced, still won't come on, no picture. When turned on, I can see a blue, kind of sparking light and noise starts and does this about three times. TV powers down and does this again....


Samsung DLP TV Repair - No Picture - Replacing ...

? 2:41
https://www.youtube.com/watch?v=pBTgk_C5FVU
Jun 11, 2012 - Uploaded by ShopJimmy.com
DLP TV Repair No Picture Bad Lamp Bad Bulb TV Won't Turn On DIY Samsung DLP TV Repair How to replace Faulty LampTutorial Click Here to ... Rating is available when the video has been rented. ... is a replacement for the following DLP Rear Projection TV models: ... SAMSUNG HLR6167WX/XAA

Samsung DLP problems - Help! - ecoustics.com

www.ecoustics.com > ... > Home Video Forum > Projection TV Forum
Oct 26, 2009 - I have attached a picture of to show where the "Light Tunnel" is located. Upload ... So now I have a Samsung HLN5065W/XAA that I am willing to part out or sell as is. ... I replaced the ballast but the TV still won't turn on. .... The lamp has been sitting on a shelf until two weeks ago, when the TV went dark. Samsung DLP Light Ballast
Apr 10, 2009
Archive through October 26, 2009 - Samsung DLP problems ...
Apr 8, 2009
Samsung DLP Flashing Standby light
Jul 1, 2006
More results from www.ecoustics.com

Jan 19, 2016 | Samsung SELECT HLR6167WX/XAA Rear...

1 Answer

Looking for technical help for Samsung 61" 1080p 120Hz Slim-Depth LED Engine DLP television . I have sound but no picture. 3 flashing lights on from of panel; timer, lam, and standby/temp


Hi,
Hope you got helpful info from our expert to solve your tv issue, if you still need further help, let me know to assist you further along with info what actions have been taken to fix the problem.
Thanks.

Sep 13, 2010 | Samsung 61" Slim-Depth LED DLP HDTV

2 Answers

Samsung hlr5067w shuts of after 30 seconds... flashes red


I would suspect the lamp first as they can cause intermittent shut down issues.

Nov 03, 2009 | Samsung HLR5064W DLP Projection TV

1 Answer

No picture, display reads- green lamp, timer, standby, temp samsung 50" dlp


hi your tele light tube has expired or your light which is located at the rear of television

Oct 22, 2009 | Samsung SP50L6HX 50" DLP HDTV

1 Answer

Samsung HLR5067W


Faulty lamp could be, there is also a little blue switch behind the lamp door that needs to be in the down position.

Nov 16, 2007 | Samsung HLR5067WX 50" Rear Projection HDTV

2 Answers

Samsung DLP HL-P5063W


you have the same problem I have. The problem is fixed by changing the new light bulb. The problem appears again after 1500 hours of use. You can keep buying new light bulbs or avoid it by not buying another Samsung TV.

Sep 23, 2007 | Samsung DLP HL-P4663W 46" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

443 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...