- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Right, After several months of struggle to find written instructions how to attach the central harness adjustment strap (The one with metal anchor at the end) to the red clip (buckle) strap as seems to be shown in instructions.
I have found number to temtex uk company that supplies nania products to argos on 01162844910, while emailing them on email@example.com had no result.
There's no need to attach the two.
Central harness adjuster strap has to be detached and pulled by it's front end as far as it goes.
While red clip strap threads through the gap between backrest and the base.
And red clip strap threads through hole (bracket) at the back of the base.
hi normally on all car seats there is a button or a metal plate at the front of the car seat some times it could be under the fabric you need to press and hold while pulling out the strap to your babies size. hope this helps , good luck x
We just fitted our 'new' secondhand narnia yesterday with instructions and it was a bit of a fiddle, but once in was very secure. Place the lap/diagonal belt through the slot in the back so that it comes out the front, it then goes over the arm rest, back through the other slot, across the back of the seat, then through the slots in the other side over the arm rest again and click it in.