Starting problem After plugging my 1210 printer not responding any electric connection.Electric line is OK.

ck electric side of key switch may be over heating and then cools off and runs again, relay can also do this. then ck anti theft.

This may be a longshot, but many electronic devices like TVs, dryers with electronic computerized controls, entertainment systems like the Wii, and other devices sometimes get "confused" and won't turn on, turn off, or otherwise work properly, perhaps due to a small power surge in your AC line.

I've found that one of the first things to try when it appears to be a failure of the electronics and not a mechanical issue is to unplug the device at the wall (to make sure that any power adapter is also unplugged) and wait about 10 minutes for any residual electric charge to dissipate. Then plug the device back in and give it a try. This has worked with a television, a Wii console, an electric clothes dryer, and some other devices that I thought had died for good. This may explain why sometimes a device is taken to a repair shop and it works fine.

There are, of course, other reasons that the unit won't turn on, but I would try this first before looking for other reasons for the problem.

Try Using the HP Print Diagnostic Utility in Windows - HP Customer Care (United States - English)

1. Verify electricity
2. Verify connected to computer still. (USB assumed)
Unplug it and plug it back in at both ends of the wire. Make sure USB is not in a network port.
3. Pull electric from printer 3 min. Restart computer.
4. Test; if no joy reinstall printer, but do not plug in USB until asked for it.

Please vote if helpful!

The wall socket is working fine and the printer is not. SO the link, ie, the power cord may be defective. Or the power socket on the printer or the power on switch. Any of these could be the culprit. The power socket on the printer is unlikely but the plug there could. If you have a spare power cable or your friend has, just borrow it for a few minutes and try it out. If it does not work then the power on switch is the culprit. And to change the switch you need professional help. Biggest problem being that unless there is power reaching the printer, nothing can be said firmly if rest of the printer is fine or not.

canon lbp 1210 printers
has a probleam a legal page setting
plese answerer legal page setting

http://h20180.www2.hp.com/apps/Lookup?h_lang=en&h_cc=us&cc=us&h_page=hpcom&lang=en&h_client=S-A-R163-1&h_pagetype=s-002&h_query=psc+all+in+one+1210+series&submit=Go+%BB
FREE here ya go .................
Please rate me thx : )

scanner hardware failure,
nothing much can be done just replace the device.

unlug all the cables and cat and then put every thing back een the power cord and after 40 sec then plug back now check if the same thing persist then printer needs to be replaced

i have a ML 1210 but I have not a XP driver