Question about Belkin Computers & Internet

1 Answer

I need to change the mtu settings on my belkin f5d9230-4 router

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 89 Answers

You will need a PC that's wired or wireless through the router.

1.) Open Internet Explorer , type 192.168.2.1 in the address bar and press Enter.
2.) A windows will pop up for username and password. Type admin for both. If it does not accept admin, type the username and password that you set the first time you setup your router
3.) On the Belkin web interface click the WAN tab (left side of the screen) > select Connection Type and look for an MTU box (lower part of the window)
4.) Change the MTU and save the changes.

Good luck and have a nice day!

Posted on Sep 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am 14 and was playing xbox live, it shut me offline and when i diagnosed the proble it said my mtu setting need to be at least 1364, how can i fix that?


MTU is the maximum size (in bytes) a protocol is able to send. Not super familiar with xbox but I would check under your network settings. Although I doublt the xbox will allow you to set this. So the next step would be to check your router settings. You will need the following
  • A PC or laptop
  • Ethernet cable
You will need a computer plugged in via ethernet into your router.
  • Open a browser and enter the gateway address in the address bar
  • You can obtain your gateway address by going to a command prompt and typing "ipconfig"
  • Login to your router (if you've never setup the router with a login it will probably be a generic login such as admin/, admin/admin, / or /admin
  • Look for your MTU setting, this is generally under the advanced settings
  • Set it to 1500 if it is not already.
Please comment with how the xbox is connected to your network as well Comment back if you need more assistance
Another cause of xbox live booting you is if someone logs into your xbox live account else where as xbox live only allows for one login at any give time.

Aug 12, 2011 | Computers & Internet

1 Answer

I have a Belkin G Wireless Router and all of a sudden the wireless internet has stopped working. i have restored default settings to the router. the internet for the computer is working through the router...


Probably you have to turn on the wirelss portion. Go to Belkin and download a manual for the exact steps.

You need to navigate your web browser to the router, log in and make changes. I have included the highlights that need to be set, below.

Wireless Router


It is usually easiest to run the install wizard, but be sure to be ready to set the items listed below.


Things to set:


Note: Routers are intended to be set by geeks. You have to SAVE EVERY page, or the changes will be lost. A geek knows this (apparently). The router gives no protest...just dumps your changes.


1. Login password (RECORD THIS!!). Consider taping to bottom of the router. Physical access is not the security issue.


2. Set a recognizable system ID.


3. Invoke wireless security of at least WEP.

a. Assign your own access code, 10 digit home or cell #. Consider taping to bottom of the router. Physical access is not the security issue.


4. Check that your router is set to broadcast its' presence.


Oct 23, 2010 | Computers & Internet

1 Answer

IP conflicts using the Belkin Model 570230-4 router and I do not have the belkin utility CD.


For that you need to enable dhcp on router.
Then set in your computer network adapter property to ip get automatic.
For that Connect your router to computer with ethernet cable then you can access it with following default link.
For belkin router http://192.168.15.1
or
http://192.168.2.1

If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it.
Then it ask for user name and password.
Type user as "admin" and password as "admin" or "password" or blank.
Then you can see configuration page of router.
Then enable dhcp and save settings and restart router.
Let me know if you need further assistance.
Thanks for using FixYa.

Feb 07, 2010 | Belkin Computers & Internet

1 Answer

My Belkin 4 port router has the same IP as my Modem so my router will not detect my DSL connection. Ive asked Belkin for help but all they send me is gobblygoop!


Hi!
I'm sorry to hear that Belkin did not help you with your problem. Let me help you with your concern instead.

Here's what we need to do:

Start by resetting the router to factory default - you just need to press and hold the rest button on the router for about 30 seconds (with the power on).

1.) Disconnect the Belkin router from your modem , connect a PC to the router (use the LAN port - either port 1 to 4).

2.) Open Internet browser - clear the address bar and type in http://192.168.2.1 , press enter. It will ask you for a password , do not type anything just press Submit. You should be able to access the router's web interface.

The router's web interface should like this (depending on the model #):

92853d1.jpg



3.) Go to LAN settings. Change the router's IP address to 10.10.10.1 (this will be the new IP address of your router) . Apply the changes. Once youapply the changes, you can access the router using the new IP - http://10.10.10.1.

4.) Reconnect your modem - router and computers. Reboot device by switching off the modem , router and PC.

5.) Power up the modem first. Wait for about 2 minutes, power up the router and restart your PC.

The steps I gave is applicable if your modem is not on bridge mode. If your modem is on bridge mode (meaning it requires a username and password from your ISP) - access again the router by going to http://10.10.10.1 and do the following:

Click Internet WAN > Connection Type and select PPPOE. Type the username and password from your ISP. Apply the settings. Reboot the modem and router.


I hope that helps.

Good luck and have a nice day!

Nov 25, 2008 | Belkin Computers & Internet

1 Answer

I need to restore my wireless router to its default settings because it was changed to an access point an now my laptop cannot conect to our network... i have the Belkin Wireless G Plus MIMO Router, thats...


Just look on the back of the router and find the reset hole. It's small and you'll need a paperclip to put in the hole but you must unplug the router first then put the paper clip end into the hole and hold the button down while you plug in the router making sure you hold the button for about 20 seconds. Now you should have a reset router.
Hope that helps,
Henry

Nov 15, 2008 | Belkin Computers & Internet

1 Answer

Wish to change my password on the Belkin G Plus Nimo router and cannot remember where to go to get in and do it


1. Access the router's setup page by going to 192.168.2.1.
2. By default, there is no username and no password. Otherwise if you have created a password to access the router's page already then use that password.
3. If you want to change the administrative password of the router, go to "System Settings".
4. If you want to change the wireless security for your wireless connection, then go to wireless settings tab of the router.

Nov 07, 2008 | Belkin Computers & Internet

1 Answer

Have xbox 360 and it says my MTU settings are too low. How do i rise the settting.


This is a common problem if your XBOX is connected through a router or gateway. What you need to do is to change the MTU setting of your router. The minimum setting for MTU should be 1364. If you are not familiar with the configuration of your router, you can contact the technical support of the router's manufacturer. You can also search google.com for the step by step instruction in changing the MTU of your router - do a google search for your router's brand and model + MTU setup.

Good luck and have a nice day!

Oct 01, 2008 | Computers & Internet

1 Answer

I can't connect to my router because I accidentally changed some settings I wasn't supposed to and I need to reset my router back to the default settings, but can't because I can't connect to it because of...


If that's the case better reset the router, To reset a router you need to press and hold the reset button for 15 seconds while its power on, then after that all the settings will be back to its default settings and you can reconfigure the router back...

Hope that helps.............

Sep 12, 2008 | Belkin Computers & Internet

1 Answer

Need to reset wirless router from pppoe to dhcp because of change internet provider


Hi Chapers,
Before resetting the router need to know the settings of your new service provider which can be changed so that it can worked with your new service provider. If the router settings are correct and you are connecting you router wirelessly with computer, need not to do anything else if it was working previously.

Jun 02, 2008 | Belkin Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

steve morris
steve morris

Level 3 Expert

1675 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...