Hello, I am unable to connect my h700 to my palm centro. The centro doesn't seem to recognize the h700. It never "locates" the device. Please advise as to how I might be able to connect the two. Thanks very much!!
Re: I am unable to connect my h700 to my palm centro.
I was having the same problem. I finalyl have it working. With the boom closed on the headset Hold down the call button until the light turns purple immediatly let go of the button and then flip open the boom the light should remain purple. Then have the palm centro look for devices and it should now come up. Before I could not get it to locate any devices but now it reognized an "unnamed device" and then it does change it to the H700 after this you can connect it will ask for a passkey or password and it is "0000" Mine has been working fine now. Hope this helps all!!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try disconnecting the bluetooth device then turn the bluetooth off then hold the power button untill the bluetooth shows a solid red light then try connecting the bluetooth between your palm and the bluetooth device hope this helps
most bluetooth earpiece pass keys are 0000 or 000000. Hold the device power button down until the lights flash two colors, then locate device with the blackberry. Enter either of the two codes and see which works. Normally you can not change the code on the earpiece, but you can on the phones.
Depending on the phone... try and remove the currentbluetooth device. Close the headset. Go to the phone and choose discover, or search. Open theheadsetand press and hold the big button. It should then turn purple and should be recognized.
Also make sure thebatteryon theheadset is charged before doing this.
If this doesntwork: Start the search onthe phone, Keep the boom of the mic closed when you press and hold the buttonon the h700. the light should turn purple. After this, open the boom
The passkey will be 0000, four zeros.
To pair the Motorola, turn off the headset first then hold the Call button until the LED ring turns purple, quickly open the boom so that the LED stays solid purple, the headset is now in pairing mode. Use your mobile phone to discover and pair with the headset using “0000” as the default pass code.
To successfully pair the Motorola 700 with the Centro: Select Bluetooth from the Home screen. Select "On". Under "Visibility", select "Visible". Now click "Setup Devices". Click "Hands-free Setup" On the Motorola earpiece, with the flip-out mouthpiece in the closed position, press and hold the multi button until ring around it glows purple. Flip open the mouthpiece. Now click "Next" on the Centro's screen. The Centro should find the Motorola. Hold the Motorola to the right side of the phone if you have difficulty getting the Centro to find it. Once found, click the Motorola H700 listed in the window and click "OK". The Centro will ask for the device password. Enter 0000. Be sure that the checkbox for "Add to trusted device list" is checked. Click OK. The two devices should now be paired to work together and the Motorola's multi button should rapidly blink blue; NOW click "Done". You will be taken to the Trusted Devices screen. You will see your Motorola in the list of Trusted Devices. Click on it to highlight it, if it is not already highlighted. Click the menu drop-down key (located to the right of the ALT key). You will now see a drop-down at the top of the screen that says "Connect". Click the "palm" center button on your Centro. NOW the two devices are connected. The phone name will now be bold, and a small Bluetooth icon will appear to the right of it. When you click the Phone key on your Centro, you will see a tiny blue headphone symbol now at the top right of the screen where the Bluetooth icon used to be.
To use the earpiece: Flip it open and hang it on your ear. Dial the number you want to call on the phone. Press the multi button once and now you should be connected via the earpiece. To receive a call, when your Centro rings, press the multi button once.
It took me a few hours to figure it out. Hopefully you can do it in a few seconds.
I'm having the same problem except my message says "seeking motorola h700" and keeps seeking until the h700 goes into powersave mode. I called motorola support and they told me to take it in for repairs( at my cost cuz the warranty is over). I've only used the h700 a handfull of times( I bought it more for optional convienience). I've got to say I'm pretty dissapointed with the durability with this product.