Question about OKI Printers & Copiers

1 Answer

The check mark on my OKI 3400n printer is on, and I need to get it off.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,913 Answers

Right clik other printer then clik on set as default printer
thats all

Posted on Sep 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset drums on oki 3400n


is there a way to reset the user life warning for the fuser

Sep 03, 2010 | OKI C3400n Laser Printer

1 Answer

Our OKI is printing 3 black marks down the right hand side of the page


Hi,

The black marks normally comes from a worn fusing unit. in most printer nowadays, you buy a maintenance kit that comprises of roller, pickup rollers, fusing unit and drum. after changing those items mentioned above, you should correct the 3 black marks on your printouts.

Feb 25, 2010 | OKI C5200n Laser Printer

2 Answers

Cartridge error -


FRIEND THIS PRINTER IS IN RIGHT SIDE next to LEVERS OF BLUE CARTRIDGE TWO SMALL LAMPS ARE sensors, if they are dirty TONER WILL MAKE OF THIS MESSAGE.

Jul 17, 2009 | OKI C5200n Laser Printer

1 Answer

OKI C3200, status monitor


Check our USB cable. It should contain AWG marking on it. Depending on AWG number there is a limit to USB cable length as follows:

28AWG = 0.81 m
26AWG = 1.31 m
24AWG = 2.08 m
22AWG = 3.33 m
20AWG = 5.00 m

Make sure your cable does not exceed the maximum length according to its marking. Replace the cable if it exceeds the length.

Jun 07, 2009 | OKI C3200 Led Printer

2 Answers

Error Message/Black toner empty


Your printer cartridge chip is damage you change Black toner cartridge

May 28, 2009 | OKI C3400N Single Pass Color Printer

2 Answers

Oki3400n - how to assign a static ip address


I found this post via Google trying to solve the similar problem with C3200n.

>> this will then cause problems as all the pcs that are trying to print to this
>> printer will no longer be able to find the printer.

Originally, I also had this problem (with C200n, but it is probably similar). If I recall correctly, I solved it as follows:

1. Open the OKI LPR UTILITY from the machine you are trying to print from.
http://img8.imageshack.us/img8/4552/okilprutility2009080217.png

2. Choose Option > Setup
http://img8.imageshack.us/img8/9641/setup20090802171057.png

3. Make sure that the Auto Reconnect checkbox is checked.

Again, I believe that is what I did to solve that I couldn't print after power outages etc. The IP is not static, but it still solves the problem.

---------
Static IP

Today I wanted a static IP for my OKI C3200n because sometimes there would be conflict between the IP for my printer and another machine in the house with a static IP.

What I did was the following.

1. In the printer menu locate the NETWORK MENU
http://img35.imageshack.us/img35/6889/dscn0525e.jpg

2. Go to the IP ADDRESS SET option, change from AUTO to MANUAL
http://img25.imageshack.us/img25/6122/dscn0526x.jpg
http://img195.imageshack.us/img195/7987/dscn0527j.jpg

3. Go to the IP ADDRESS OPTION, change to the desired ip address. In my case it was at 10.0.0.5, but I wanted 10.0.0.6 for the printer, so I changed it to that. Typically this is either 10.0.x.x or 192.168.x.x

http://img35.imageshack.us/img35/4407/dscn0528p.jpg
http://img90.imageshack.us/img90/1669/dscn0529r.jpg

4. Press the online button. The printer will reset the network connection (it took approx 1 minute)
http://img195.imageshack.us/img195/2539/dscn0530.jpg

5. This should be enough. You can try to ping the printer at the new IP, or navigate to the new IP in your browser:
http://img44.imageshack.us/img44/565/c3200nopera200908021755.png

Feb 01, 2009 | OKI C5400 Laser Printer

1 Answer

Oki microline 320 turbo


Your Oki model does not need drivers, for they are already contained since Windows 98 and up. However, if it still doesn't work, check that the printer emulation is set to IBM and then install a new printer using the IBM Proprinter II/III driver, also contained in Windows.

Be blessed.

Oct 02, 2008 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

Oki 3400n


First thing to do (if not yet done so) is to access the printer through the web admin interface by typing the printer's IP address in a browser. This gives a lot more information than the blinking lights.

The Status page of the web admin interface may say "toner low" or "toner empty" or "error on toner sensor" and that will tell us which color cartridge to handle.

Note that the OKI 3400n has the annoying tendency to fail when loading in a new toner cartridge: a color is low or empty, you put in a new color tube and then the printer says error on that very color! This can be fixed by pulling out the drum of that color (the drum is that entire block which includes the color tube and the container below it; avoid touching the shiny green roller), and lightly tapping on that drum to evenly distribute the new powder inside the container.

You may have noticed that the once the color tube is loaded in, what it does is to empty its content into the container below. Which means that it's no use swapping color tube once it's installed because the color tube is empty by then, and is just kept there to prevent the ink powder from spilling out of the container. The caontainer itself has 5 electrical contacts on its side used to measure the powder content and the lifetime of the drum.

Viet

Aug 29, 2008 | Printers & Copiers

2 Answers

PRINTS NOT ON DEMAND


The types of printers that you have actually should be assigned to a free port, you cant setup 2 printers on the same port. check at the back of the printer the physical attachment of two printers the OKI and the Epson, if Oki is set to lpt1 then assign port from printer properties for oki to lpt1, and lpt2 on epson. 1 printer- 1 port, so by then check if the box for enable bidirectional support is check, remove the check mark from the box by clicking on it then hit apply then try printing a test page then try printing from application.

Apr 08, 2008 | Epson TM U325PD Matrix Label Printer

1 Answer

OKI 9800 with "342" error code


problem might be with toner recycle coil which runs around the back of the belt unit. as the cyan unit is the furthest down the line if any blockages occur it can back up and lift the drum unit up. check the square opening of the recycle unit on the cyan end. Make sure you change waste toner unit when prompted or you might break a gear (big job) Karl Oki engineer

Aug 24, 2007 | OKI 9800hdn Laser Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top OKI Printers & Copiers Experts

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

SiNnA
SiNnA

Level 1 Expert

38 Answers

Dominion Computer...
Dominion Computer...

Level 2 Expert

269 Answers

Are you an OKI Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...