Question about Sony KP-51WS510 51" Rear Projection HDTV-Ready Television

1 Answer

Sony projection tv

Hey i could realy use some help i have a sony projection tv model kp-51ws510
the light blinks 8 times for the eror . please how do i fix and where to order the parts? thanks
Todd

Posted by on

  • ronniehuff Oct 01, 2008

    And also there is black spots on my same tv. What do i do.



×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sony Master
  • 8,617 Answers

8 blinks is usually the error for a bad flyback. you can get a replacement at the following link and if your not sure which one your model uses click on the sony flybacks one at a time and it will tell which model they fit. Heres the link.
http://servicemanuals.vstore.ca/

Posted on Sep 30, 2008

  • Sonny Berry
    Sonny Berry Oct 02, 2008

    if the black spots are visible when the set is off if may be just dirt on the screen. If so the link I posted has free tech support to help you get to the screen assembly or if its something else they can also help you with that as well.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Red stand by light blinks 8 or 9 times and no picture or sound


hello Problem with the audio (AUDIO), unit goes to standby and blinks the self-diagnosis code. Check IC406 audio amp, PS401, and 402. On some projection models of Sony TV sets, this code means that T8005 (flyback transformer), or the associative components in the high voltage circuits are defective on the D board.Nine blinks - Replace D 6116 and D 6301 on the "G" board, do not resolder as this will fix the problem temporary. Or Panel Module Error or Thermal Error. If it is intermittent 9 blinks, meaning sometimes the TV comes on and other times you get flashing, then change the switching regulator on the "G" board or check connections. Make sure the regulator is -12 or -13 (negitive).

shaun

Oct 18, 2009 | Sony KP-51WS510 51" Rear Projection...

2 Answers

2004 Sony 52" Wega dont turn onnthe stand by light stays flashing. This TV first started by taking long to turn on and now and then would turn off until one day it just didnt turn on and the standby button...


When that model Sony shuts down the LED starts blinking as you say but it is telling you something because it blinks a certain number of times and then pauses and repeats the number of blinks. Count the number and then I might be able to help you narrow down where the trouble is.

Jun 14, 2009 | Sony KP-51WS520 51" Rear Projection...

1 Answer

Sony 5 projection tv kp-51ws510 no pic, light flashs 8 times


I have the same model TV and have had that same problem (*8 flashes) The FLYBACK TRANSFORMER on the D circut board is the most likely cause and will need replaced) the part is around $70.00 USD!
Please rate my response
THANK YOU!

Jan 22, 2009 | Sony KP-51WS510 51" Rear Projection...

1 Answer

Sony KP-FX43M31


On the Sony FX43 100Hz 43-inch rear projection TV, three flashes indicates an Over Voltage Protection problem, occurring in one of the power supply circuits T603 or R672.

The fix will most likely cost more than the set is worth second-hand, I'm afraid.

Jun 28, 2008 | Sony KP-51WS510 51" Rear Projection...

1 Answer

Sony KP-51WS510


8 blinks in that model means High Voltage Error which means the flyback is defective and will need to be replaced. Sony parts list it as no longer available. But you can get it at the following link for 129.95 and it comes with free instalation instructions. the job takes about 45 minutes from start to finish. Heres the link.
http://servicemanuals.vstore.ca/

Apr 29, 2008 | Sony KP-51WS510 51" Rear Projection...

1 Answer

Red light Blinks


your set is shutdown for protection due to an audio malfunction in the audio circuits. heres the info for your model from the service manual.
• + or - 22V audio supply is not
present—Check PS600 & PS601
• Audio AMP is damaged IC601 on
A Board

Apr 06, 2008 | Sony KP-51WS510 51" Rear Projection...

1 Answer

Sony KP-51WS510 Shuts itself off


eight blinks means, "High-voltage error" and the probable cause location listed is, "T8005 is faulty (D board)". T8005 is the fly-back transformer assembly.

Dec 09, 2007 | Sony KP-51WS510 51" Rear Projection...

2 Answers

Sony TV Repair


It is really hard to say what could be your problem, so let me know exactly what it is -Does your set play-and has no sound and can you go into menu to audio?let me know i will try to help you.Thank You for using FixYa and Have a Nice Day

Feb 27, 2007 | Sony KP-51WS510 51" Rear Projection...

Not finding what you are looking for?
Sony KP-51WS510 51" Rear Projection HDTV-Ready Television Logo

Related Topics:

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Projection Televisions Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

Ap12
Ap12

Level 2 Expert

103 Answers

Jason Harris
Jason Harris

Level 2 Expert

256 Answers

Are you a Sony Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...