An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: KDF-E50A10 sony wega
If you are using the original remote, there should be an extra button marked 'CC' Cycling that button will probably offer more than one choice.
Typically it will include CC on mute, CC on, CC off.
If that isn't present, you should be able to access audio settings through the main setup menu.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if its the lamp indicator flashing its an issue with the lamp. If the lamp is new I would double check to see if its making contact completely when its slid in often the pins can get bent slightly. If it were the ballast the power indicator would blink 5 times.
Over Voltage Protection 03. Three blinks of standby light denotes this. The fault is with its main power regulator section circuit. If you wish to get more details about these blinking codes, check this link. If you are not familiar with electronics, do not attempt to
repair.Whether you sufferfatal electrical shock!
Instead, contact the nearest service center.
Over Voltage Protection 03. This is the fault. Visit the site named 'Electro-help' for
more details. Click this link. View it in
"Timeslide" or "Flipcard" option, which can be selected
from the drop down box menu by the [Sidebar] tag, at the top left corner
of the display window. It will make
search easy. There are more than 1200 posts to different brand TVs now. Pull up
older posts there. Blinking codes to Sony TVs are described in detail.
Power supply board part number for Sony KDF-E50A10 is as follows:
A1113732A .... GT BOARD COMPLETE
and if you are asking for ballast power supply board part number, it is as under:
146893611 ... POWER SUPPLY BLOCK
Hope these info will help you. Thanks.
Im guessing it is doiong this about every 30 seconds or so. Im also guessing that when the sound and picture go out, the green standby light flashes until the set comes back on. If this is the case, mine was doing the same thing. I did a bunch of research. I replaced the lamp and the tv is like new, no more problems. The lamp light on the front of the set does not come on because the lamp/bulb is noot burned out all the way. I bought my lamp from www.vanns.com , the best price I found.
Some of these models have this problem from production. I would recommend to contact SONY and tell them the problem they may be able to fix your TV at no cost, since some of their Light engines have a recall but I'm not sure if your model number is one of those.
If you want to fix the TV yourself you need to replace the light engine and that requires advanced skills for this product