Question about Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

I have a wf321p hotpoint aquarius washing machine. it never stops draining.

What happens is that when I try to start a cycle the on/off light starts to flash along with the mini load light and the rinse hold light. The machine will not stop draining water hereby water is also coming in non stop. I have cleaned out the filter and checked all the hoses for blockages. Please can you try and help me with this as I hardly have any clothes left lol.

Thanks a lot

Posted by on

  • Bazzawolf Dec 30, 2008

    What happens is that when I try to start a cycle the on/off light
    starts to flash along with the mini load light and the rinse hold
    light. The machine will not stop draining water hereby water is also
    coming in non stop. I have cleaned out the filter and checked all the
    hoses for blockages.I SUSPECT THE PRESSURE SWITCH as when I disconnect the pump the machine does not stop filling, what I need is a wiring diagram

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Passionate:

    Visited the website for 10 consecutive days.

  • Expert
  • 146 Answers

Hello!

Please check the Troubleshooting part of the manual. https://manualsbrain.com/en/manuals/1861489/?page=18

Hope it will help

Posted on Aug 09, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Hotpoint Aquarius wf 541

Had similar prob with wf430, 3rd & 4th light flashing (rinse hold and time saver). read previous entries, checked for blocked pipes at back but all clear. Took out some of my washing and tried again with a lighter load and it seems to be working now. Not sure if perhaps we overloaded it, despite its 6kg washing capacity boast. Hope this helps

Posted on Feb 09, 2008

  • 1 Answer

SOURCE: Aquarius Hotpoint WD440. 1400 Spin

hotpoint Wd440. I had the same problem, lights flashing and water not draining, First drain your water (syphoning works but tastes ****), if the machine drains then you know its not blocked. Then put the machine on M for about 5 mins, then put it on fast spin. This should do the trick, it worked for me anyway. Good luck.

Posted on Aug 10, 2008

barkencoa
  • 3463 Answers

SOURCE: Started having a noisy rinse & spin cycle, then stopped.

Open the washer door and spin the drum by hand, if it feels rough or noisy and rumbling, then the main drum bearings have failed. There should be little or no noise when you spin drum
This is a major repair, and I would not recommend a D.I.Y solution.
Other possibility is there is something in the pump, but you would only hear this when the pump is working.

Plz rate my comments.
Thanks.

Posted on Jan 07, 2009

  • 1 Answer

SOURCE: Hotpoint WT540 1400 spin. Flashing Rinse hold and Mini load LED

Had exactly the same last week - Jan 09 - and had to call out Hotpoint engineer - £99.98 all inclusive of parts - it was the main controller board, so thats under guarantee for another 12 months. all working and spinning as should be and only took around 30mins.GS :)

Posted on Jan 22, 2009

reddyanantha
  • 205 Answers

SOURCE: hotpoint aquarius wd440. Flashing lights

hello mam please check the timer switch.

Posted on Oct 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi there, My washing machine is hotpoint WTL500


My washing machine runs for 10 minutes then all the lights start flashing also there's water in the drum, I've drain the water twice but it does the same thing.
Any idea what's going on there pls.

Aug 11, 2013 | Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

WMA 54 Hotpoint Aquarius washing machine lights flashing


the problem here is the machine is not emptying when its supposed to, you will find it is stopping at the rinse cycles. there is a sump underneath the machine that needs to be emptied. From my experiences, 9 out of 10 hotpoints that i would of repaired with the same problem as you are having is usualy caused by using the color catcher sheets, they are a disaster.

appliancesdav@hotmail.com

pallesappliancerepairs.com

Feb 03, 2010 | Hotpoint Washing Machines

1 Answer

Machine fills and drains at the same time.


Check the height of the drain hose and make sure the drain hose is higher than 30 inches from the ground. If your drain hose drains into the floor you may need to purchase a siphon break to stop the problem

Apr 01, 2009 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

Washing machine stops mid cycle and lights start flashing


Drain the water by lowering the hose into a bucket or something and then try it on spin, if it spins o/k then you probably have blocked pump or filter.
The filter is located in the large black hose that is fastened to the bottom of the drum, remove and clean.
Hopefully this will solve the problem.
Plz rate this solution.
Thanks.

Dec 17, 2008 | Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

I have a wf321p hotpoint aquarius washing machine. it never stops draining.


The issue you have is actually one i have come across on several occasions, these models have a couple of weaknesses in the electronics, it the door latch fails then it can feed voltage back into the electronics and cause all sorts of odd issues, unfortunately it's a matter of replacing the electronic controller and then see what else if faulty, in most cases it's cheaper to replace the machine.

May 14, 2017 | Washing Machines

1 Answer

Hotpoint Aquarius WD420 5+5Kg


The water level vacuum switch are not working , check hose might lose.

Dec 31, 2007 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Hotpoint wd420


Check if the hose from the tub to the drain area has come off; refit carefully. This could happen if the tub is unbalanced, happens sometimes.

Pl rate if helped..................

Dec 28, 2007 | Hotpoint Aquarius WD640 Front Load...

Not finding what you are looking for?
Hotpoint Aquarius WMA42 Front Load Washer Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

Todd Arndt
Todd Arndt

Level 3 Expert

2044 Answers

freddyfox

Level 2 Expert

236 Answers

ptpumpman

Level 3 Expert

407 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...