Question about Canon PIXMA iP4300 InkJet Photo Printer

Open Question

Squeaking Canon IP 4300 Printer

Hi can anyone advise please I have an Canon Pixma IP4300 Printer, excellent machine apart from an annoying Squeak on start up anyone else had this prob? email me please blewburtgeorge@googlemail.com
mny tks

Posted by on

4 Suggested Answers

  • 310 Answers

SOURCE: Error Code B200 on Canon Pixma IP4300

Just restart the system and turn off the printer and turn on the printer it will work.

Check did you correctly placed your cartidges.

Posted on Mar 03, 2008

IrishDruid
  • 2712 Answers

SOURCE: driver for canon pixus ip 3100 printer driver

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=357&modelid=10238

Select your OS and download.

PS, please dont forget to rate this solution as Fixya once you're done! thanks in advance.

Posted on Jun 01, 2008

  • 2 Answers

SOURCE: Rollers squeak.

This probably means the rollers are getting slick and a little glazed. Dell printers seem prone to this. It's harmless unless it is the primary (big) rollers that push the paper up into the toner drum. See my advice to the paper jam question for fixing that.

Posted on Jul 08, 2009

  • 1 Answer

SOURCE: Drivers for :Canon Pixma IP 1000

driver for
printer canon pixma IP 1000 for windows 7 64-bit

Posted on Mar 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want service manual for Canon Pixma iP4300


Hello friend, I had downloaded a Good canon iP4300 service manual from below link:

Canon iP 4300 service manual:
http://goo.gl/45JFrF

Good luck on repairs.

Sep 11, 2011 | Canon PIXMA iP4300 InkJet Photo Printer

1 Answer

How can I reset iP 4300 Canon printer? Thank you.


http://www.youtube.com/watch?v=0Tyzx9bepPw

In this video you can watch how to reset IP's and MP's canon printers.

Nov 27, 2010 | Canon PIXMA iP4300 InkJet Photo Printer

1 Answer

Canon Pixma IP 4300 printer - 3 blinking panel lights indicate paper jam, however no paper jam is present. I turned off machine, pulled power plug, waited for 5 minutes, turned on printer, but problem did...


It is possible that the printer is having an error due to either a sensor fault ( optocoupler) in the paper detect section or a possible software issue.
So disconnecct printter, and uninstall the soft ware , the reinstall and then connecct printer to be detected and installed.
If the fault stays then the sensor must be checked.

Sep 11, 2010 | Canon PIXMA iP4300 InkJet Photo Printer

1 Answer

How do i change or clean the inktank on a canon ip 4300


Canon support has the following tutorial: (copy and paste the following link into your browser)

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=257&modelid=13528

Enter question: "How do I replace or insert an ink tank" > Click "Search" button > View tutorial.

Dec 04, 2009 | Canon PIXMA iP4300 InkJet Photo Printer

1 Answer

My ip 4300 has stopped feeding paper


..."Open the ink supply andgently move the ink cartridges to the left. Then reach in to the rightside and you'll find a small (1/2 x 1 inch) sponge. Push it down andoff/on the machine. try it now. or ...go to where I found out more than I should know about Canon's and where I got my quote...http://www.fixyourownprinter.com/forums/inkjet/39177 good luck.

Oct 18, 2009 | Canon PIXMA iP4300 InkJet Photo Printer

1 Answer

Canon ip 4300


Google "canon ip4300". The canon.com entry near the top has a support tab. and enter "paper skew", you'll get a roller cleaning procedure.
As a matter of fact, it didn't solve my problem. The alternative, of having the machine repaired, is, of course, silly vs. buying a new machine. But in the meantime, the lower paper feed still works, albeit slightly less convenient.

Apr 22, 2008 | Canon PIXMA iP4300 InkJet Photo Printer

1 Answer

Error Code B200 on Canon Pixma IP4300


Just restart the system and turn off the printer and turn on the printer it will work.

Check did you correctly placed your cartidges.

Mar 03, 2008 | Canon PIXMA iP4300 InkJet Photo Printer

Not finding what you are looking for?
Canon PIXMA  iP4300 InkJet Photo Printer Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96576 Answers

old marine
old marine

Level 3 Expert

1472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...