Question about Zanussi 24 in. DA6141 Built-in Dishwasher

2 Answers

No water entering dishwasher - Zanussi 24 in. DA6141 Built-in Dishwasher

Posted by on

  • ciarabananas Dec 30, 2008

    No water getting into dishwasher, going through pipes no problem.

    Version is DA 6142 though.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 734 Answers

If there's no water entering your dishwasher, check these:

Water-inlet valve
Float switch
Water-inlet valve
The water-inlet valve lets water enter the machine. If this valve is defective, you need to completely
replace it. It's usually located behind the lower access panel on the left or right side. It's the device
with the main water line (usually copper) from the house, a rubber tube to the dishwasher, and two
wires attached to it.

Float switch
The float switch is a small electrical switch that's located right below the dishwasher "floor."
Above the switch, on the inside of the dishwasher, is a plastic cylinder that floats up as water fills
the dishwasher. If this switch is defective, or if the plastic float gets caught or trapped in the raised
position, the water can't enter the dishwasher. If the float switch is defective, you need to replace it.

Posted on Dec 12, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a Siemens dishwasher SD561591GB/23 only 2yrs old which displays flashing water & rinse aid lights.The rest of the display is off and machine does not work.I've topped up the rinse aid and plugged it out and back on but no joy.Any ideas how to sort this.Cluade

Posted on Dec 03, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 363.1522* dishwasher is not filling with water. the unit runs, but no water is entering the washer during the cycle.


Hi,

Here is a tip that will help you to find out why water will not come into the dishwasher...

Dishwasher Trouble No Water entering Dishwasher

heatman101

Sep 07, 2010 | Kenmore 24 in. 15222 / 15229 Built-in...

2 Answers

No water enters the dishwasher when its turned on


Hi,
Here is a tip the will elaborate on your problem more, but the bottom line is that you need to replace that fill valve...

Dishwasher2_bing.gif Trouble No Water entering Dishwasher2_bing.gif
http://www.fixya.com/support/r4021363-dishwasher_trouble_no_water_entering

heatman101

May 23, 2010 | Bosch SHV46C03 Built-in Dishwasher

1 Answer

Not getting water into machine although mains water is reaching hose intake. model number of bosch is sgs44e28eu05 type si1501b


There's no water entering the machine If there's no water entering your dishwasher, check these: Water-inlet valve Float switch Water-inlet valve The water-inlet valve lets water enter the machine. If this valve is defective, you need to completely replace it. It's usually located behind the lower access panel on the left or right side. It's the device with the main water line (usually copper) from the house, a rubber tube to the dishwasher, and two wires attached to it. Float switch The float switch is a small electrical switch that's located right below the dishwasher "floor." Above the switch, on the inside of the dishwasher, is a plastic cylinder that floats up as water fills the dishwasher. If this switch is defective, or if the plastic float gets caught or trapped in the raised position, the water can't enter the dishwasher. If the float switch is defective, you need to replace it. thanks.

Feb 17, 2010 | Bosch Dishwashers

1 Answer

No water in the dishwasher


There's no water entering the machine If there's no water entering your dishwasher, check these:
Water-inlet valve The water-inlet valve lets water enter the machine. If this valve is defective, you need to completely replace it. It's usually located behind the lower access panel on the left or right side. It's the device with the main water line (usually copper) from the house, a rubber tube to the dishwasher, and two wires attached to it. Float switch The float switch is a small electrical switch that's located right below the dishwasher "floor." Above the switch, on the inside of the dishwasher, is a plastic cylinder that floats up as water fills the dishwasher. If this switch is defective, or if the plastic float gets caught or trapped in the raised position, the water can't enter the dishwasher. If the float switch is defective, you need to replace it.

Jul 01, 2009 | KitchenAid KUDU03FT Built-in Dishwasher

1 Answer

Water not going into dishwasher


Hi,

There's no water entering the machine If there's no water entering your dishwasher, check these:

Water Inlet Valve
Float switch
Water-inlet valve The water-inlet valve lets water enter the machine. If this valve is defective, you need to completely replace it. It's usually located behind the lower access panel on the left or right side. It's the device with the main water line (usually copper) from the house, a rubber tube to the dishwasher, and two wires attached to it.

Float switch The float switch is a small electrical switch that's located right below the dishwasher "floor." Above the switch, on the inside of the dishwasher, is a plastic cylinder that floats up as water fills the dishwasher. If this switch is defective, or if the plastic float gets caught or trapped in the raised position, the water can't enter the dishwasher. If the float switch is defective, you need to replace it.
Hope i helped you.

Thanks for using "Fixya".

Jul 01, 2009 | Maytag Dishwashers

1 Answer

No water


There's no water entering the machine If there's no water entering your dishwasher, check these:

Water-inlet valve
Float switch
Water-inlet valve The water-inlet valve lets water enter the machine. If this valve is defective, you need to completely replace it. It's usually located behind the lower access panel on the left or right side. It's the device with the main water line (usually copper) from the house, a rubber tube to the dishwasher, and two wires attached to it.

Float switch The float switch is a small electrical switch that's located right below the dishwasher "floor." Above the switch, on the inside of the dishwasher, is a plastic cylinder that floats up as water fills the dishwasher. If this switch is defective, or if the plastic float gets caught or trapped in the raised position, the water can't enter the dishwasher. If the float switch is defective, you need to replace it.

thanks and please do not forget to accept the solution

Apr 03, 2009 | Tappan MDB531RF Dishwasher

1 Answer

Water not coming into the dishwasher.


Hi,
There's no water entering the machine
If there's no water entering your dishwasher, check these:

Water-inlet valve
Float switch

Water-inlet valve
The water-inlet valve lets water enter the machine. If this valve is defective, you need to completely replace it. It's usually located behind the lower access panel on the left or right side. It's the device with the main water line (usually copper) from the house, a rubber tube to the dishwasher, and two wires attached to it.


Float switch
The float switch is a small electrical switch that's located right below the dishwasher "floor." Above the switch, on the inside of the dishwasher, is a plastic cylinder that floats up as water fills the dishwasher. If this switch is defective, or if the plastic float gets caught or trapped in the raised position, the water can't enter the dishwasher. If the float switch is defective, you need to replace it.

good luck......

Mar 28, 2009 | GE Dishwashers

1 Answer

Dishwasher not filling all the way,


hi,
There's no water entering the machine
If there's no water entering your dishwasher, check these:

Water-inlet valve
Float switch

Water-inlet valve
The water-inlet valve lets water enter the machine. If this valve is defective, you need to completely replace it. It's usually located behind the lower access panel on the left or right side. It's the device with the main water line (usually copper) from the house, a rubber tube to the dishwasher, and two wires attached to it.


Float switch
The float switch is a small electrical switch that's located right below the dishwasher "floor." Above the switch, on the inside of the dishwasher, is a plastic cylinder that floats up as water fills the dishwasher. If this switch is defective, or if the plastic float gets caught or trapped in the raised position, the water can't enter the dishwasher. If the float switch is defective, you need to replace it.

good luck.........

Mar 28, 2009 | Kenmore 24 in. 15689 Built-in Dishwasher

1 Answer

No water is entering the Exxcel auto option dishwasher


hello there,
If there's no water entering your dishwasher, check these:
1. Water-inlet valve
2. Float switch

Water-inlet valve
The water-inlet valve lets water enter the machine. If this valve is defective, you need to completely replace it. It's usually located behind the lower access panel on the left or right side. It's the device with the main water line (usually copper) from the house, a rubber tube to the dishwasher, and two wires attached to it.


Float switch
The float switch is a small electrical switch that's located right below the dishwasher "floor." Above the switch, on the inside of the dishwasher, is a plastic cylinder that floats up as water fills the dishwasher. If this switch is defective, or if the plastic float gets caught or trapped in the raised position, the water can't enter the dishwasher. If the float switch is defective, you need to replace it.

thanks for using FixYa

Jan 28, 2009 | Bosch 24 in. SGS45E02 / SGS45E08 Exxcel...

1 Answer

KENMORE DISHWASHER WATER DOESN'T SPRAY.


If there's no water entering your dishwasher, check these:

Water-inlet valve
Float switch
Water-inlet valve
The water-inlet valve lets water enter the machine. If this valve is defective, you need to completely
replace it. It's usually located behind the lower access panel on the left or right side. It's the device
with the main water line (usually copper) from the house, a rubber tube to the dishwasher, and two
wires attached to it.

Float switch
The float switch is a small electrical switch that's located right below the dishwasher "floor."
Above the switch, on the inside of the dishwasher, is a plastic cylinder that floats up as water fills
the dishwasher. If this switch is defective, or if the plastic float gets caught or trapped in the raised
position, the water can't enter the dishwasher. If the float switch is defective, you need to replace it.

Dec 05, 2007 | Kenmore 24 in. 15173 Stainless Steel...

Not finding what you are looking for?
Zanussi 24 in. DA6141 Built-in Dishwasher Logo

732 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

paulcarew

Level 3 Expert

1863 Answers

Are you a Zanussi Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...