Question about Samsung HLR5067WX 50" Rear Projection HDTV

Open Question

Samsung hlr5067 sometimes wont turn on

Just a little history on the set. i bought it used and it worked flawlessly for over a year until one day we had a thunderstorm the the power went off for a split second, ever since that happened my set has not been the same. 
Every ONCE in awhile when i go to turn the set on, the lamp light on the front of the set will flash once, then the standby/temp will flash once, then the lamp indicator light will continue to flash. now during all of this, the bulb is lit. after 30-45 seconds the set will power off. NOW SOMETIMES it will not power off and if you just leave it alone the picture will eventually come on. i few other scenerios when this has happened is 1) i turned off the circuit breaker in the house to change a light fixture and then the first time i tried to watch tv later on that night the set wouldnt turn on and it took about 1/2 a day until it finally did 2) one time we were watching tv and someone accidently turned off the wall switch that was controlling the outlet the set was plugged into, when we tried to turn the set back on it wouldnt turn back on.
The last person i spoke to about this problem suggested either the color wheel, or the digital board as the suspect.
I was under the impression that the color wheel normally starts making noise when its on its way out?
I would hate to have to be without the set for days/weeks if i brought it to a repair shop because since this is usually such a random problem the thing would most likely work flawlessly in the hands of a repair shop and the second i got the set home and plugged it in it would probably act up on me! I just want to get it fixed tho, because sooner or later its gonna break for good!
I'm open to all ideas here! I am a very hands on, technical guy, so tearing this set apart does not phase me. I'd rather fix the thing myself if i can figure out what component is at fault here.

Posted by on

  • Bob Dec 18, 2008

    Ditto, I have the same exact problem except I don't what what, if anything happened with power or otherwise prior to this problem. I even probably wasted $110 on a bulb. Stupid me assumed if the lamp light was flashing and I had no picture it would be the bulb. :-/

    I also noticed I don't hear the chime when powering on. My kids may have turned that off though, I don't know.

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Benimur
  • 6966 Answers

SOURCE: Samsung HL-R4266W 42 in won't turn on

Hi,

Initially, have you tried a full hard reset? If not, pls unplug from the mains. Most current devices would reset and revert back to factory default settings (assuming no internal hardware fault) when unplugged for a considerable period of time (from a few minutes to a couple of hours).

Additionally, have you tried powering the unit using another outlet?

Pls post back for any development(s) or even the lack of it.

Hope this be of initial help/idea. Good luck and kind regards.

Thank you for using FixYa.

Posted on May 01, 2008

  • 1 Answer

SOURCE: TV makes humming noise, lamp light is blinking, does not turn on

Your color wheel needs to be changed. Mine just did the same thing. I changed mine, and the buzzing sound went away, however now my picture washes out with light or yellow colors. The darks look green and purple also.

Posted on Apr 10, 2009

Axle80
  • 73 Answers

SOURCE: Samsung DLP model hln617w won't turn on (not bad bulb)

Samsung is notorious for having bad color wheels in their DLPs. Well lets just say they are like toasters, they only last a certain amount of time. If the color wheel isn't spinning or is broken, the set will power down almost immediately after you hit the button, you may not even hear the entire fire up jingle. Check the wheel, if you can see the bulb light up for that split second. Actually, check it whether the bulb lights up or not.

Posted on Jun 29, 2009

  • 556 Answers

SOURCE: Samsung HLR5067W replaced color wheel, LAMP light blinks

according to samsung this is indeed the problem.

Posted on Oct 20, 2009

Testimonial: "Excellent expert advice. Confirmed what I believed to be the problem and it was. Very knowledgable"

tvtek
  • 1284 Answers

SOURCE: Samsung hlr5067w shuts of after 30 seconds... flashes red

I would suspect the lamp first as they can cause intermittent shut down issues.

Posted on Nov 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Samsung HLR5067 was working fine last night. I left the house open and it dipped in temp (only to 40 degrees or so though)...Woke up this morning and it wont turn on at all. Just beeps a few times,...


Tv projection Lamp might be some how the causes again.Tries unplug,replug tv back like about an hour later.Try it again,should work now.If not,yes the projection lamp,might have been kill by the cold weather.

Dec 06, 2010 | Samsung HLR5067WX 50" Rear Projection HDTV

1 Answer

Samsung DLP TV repair or replace that is the question!


Color wheel sounds like it needs replacement. The set will often shut down when the color wheel gets bad and wont power up.

Jul 10, 2010 | Samsung HLN5065W 50" Rear Projection...

1 Answer

Can't turn on TV


Since when does 2 years equate from purchase date of 2008 and the date at present 2017.

Probably a power supply issue caused by leaky capacitors.

Apr 04, 2017 | Samsung HPT5054 50 in. HD-Ready Plasma...

2 Answers

My samsung 40" lcd power problem


I don't have a solution but I have the same problem. This could have been my post. Did you fix it? Once power comes on picture is great.

Sep 19, 2009 | Samsung SP-R4232 42 in. Plasma HDTV

1 Answer

Screen goes blank for seconds


bad connection, soldering goes old .using soldering iron, locate bad connection and redo them agin

Sep 14, 2009 | Samsung DLP HL-P5663W 56" TV

1 Answer

LN-T4665F 46 in. LCD- Black Line across screen


The set is under a year old and is under warranty. The LVDS cable inside these sets have a history of coming loose. The problem could be the panel. Either way, the set is the problem and needs to be looked at. This set is worked on in the home and does not need to be taken to a shop, so, you can still use it. Contact Samsung at: 1-800-SAMSUNG Hope this helps.

Jun 03, 2007 | Samsung LN-T4665F 46 in. LCD Television

Not finding what you are looking for?
Samsung HLR5067WX 50" Rear Projection HDTV Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73665 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...