Question about HP OfficeJet 6110 All-In-One InkJet Printer

1 Answer

Test page data states "no" color support

I can not print a color page from my computer i can make a color copy. hodo i enable color support?

Posted by on

  • nanyjan Oct 27, 2008

    HP Officejet G55 All-in-One. I installed using Windows 2000 Add Printer Wizard. It automatically pops up to install anything. My printer copies in color, I can see color in Print Preview mode. Prints only black/white.

    In Control Panel-Printers-select mine (G55)-right click on Properties. In General Tab in the Features area the display says "Color:NO"

    There is no way to select another option. All in the Features area are Deselectable (Is this a word?), including "paper available". Do I uninstall printer? Do I just try to reinstall using the Wizard? Can I install not using Wizard? How do I get rid of Wizard?

    Thanks

  • nanyjan May 11, 2010

    The above doesn't work. Maybe I wasn't clear. I have an Officejet g55 and installed it via Printer Wizard using HP site for G55. I get no color on printing. I get color only when copying and viewing in Print Preview mode. I am using Windows 2000 Professional non-networked just my personal computer.

    In Control Panel>Printers>select mine (G55)>right click on Properties. In General Tab in the Features area the display says "Color:NO"
    There is no way to select another option. All in the Features area are Deselectable (Is this a word?), including "paper available". Do I uninstall printer? Do I just try to reinstall using the Wizard? Can I install not using Wizard? How do I get rid of Wizard?


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 234 Answers

If it is a WinXp operating system follow the bellow mentioned steps:
Go to Start> Control panel> Printers and other hardware or printers and faxes or directly to printer>
Check which icon has the check mark>
If it is Officejet 6100Series> Then Right click on the same and left ckick on Properties> Then in the bottom click on Printing preferences> and click on Color> Under color options> Click on PRINT IN COLOR> And down bellow click on Apply or Ok and close the window.

The same can be slected when printing from a specific document or photo>
All you need to dod is after you click on Print> Go To Printer properties> Then in the bottom click on Printing preferences> and click on Color> Under color options> Click on PRINT IN COLOR> And down bellow Ok / PRINT.

ForVista>

Go to Start> Control Panel> Then Printers or Hardware and sounds> then rest steps will be the same as WinXP

Good Luck

Posted on Oct 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It will copy in color and print the test page in color it will not print from the computer in color


check printer properties from the computer on the printer .
When you print see is there is a printer properties setting.
it will most likely be monocrome printing or B/w printing

Apr 27, 2016 | Office Equipment & Supplies

Tip

How to print a config page on a Ricoh printer


On Ricoh printers, the configuration page (also called the Config page) is an information page that can be printed out with detailed data about the machine's status. The Config page shows the printer's copy count, various network settings, and current firmware versions, among other things. One nice feature of the Config page (on most printer models) is that it shows how much toner is left in the cartridge or bottle, so you can find out if you'll need to order more soon.

Follow the steps below to print a Config page from a stand-alone Ricoh printer.

A. Turn the printer on and wait for it to warm up.

B. Press the Menu button.

C. Scroll through the list of submenus using the up and down arrow keys until you see List/Test Print, then hit the OK button.

D. Look for the Config Page option, and hit OK again.

The configuration page will print out, and depending on that specific printer, it might be two pages rather than one. Whether the printer is black and white or color, the configuration page will be printed in black and white. If you want to print a test page in color, scroll further down the List/Test Print menu and you should see something called the Color Demo page.

To print a Config page from a multifunction Ricoh printer (one that scans and copies as well as prints), the steps are similar, but some of the machine's buttons are different. Multifunction printers typically don't have the Menu button, so you would press User Tools instead and then go to Printer Features. From there, the process is pretty much the same as described above.

on Jun 19, 2010 | Office Equipment & Supplies

1 Answer

Bad print quality


Follow the steps listed below to print the PQ troubleshooting pages. These pages consist of one procedure page and five color test pages.
  1. Print a copy of this Web page and walk over to the printer you are troubleshooting.
  2. Load either 8.5 x 11-inch paper (letter) or A4 in Tray 2 popup_i.gif of your printer.
  3. Press the Menu menu_button.gif button to enter the MENU on the control panel of the printer.

  4. Press the Down arrow down.gif button to highlight DIAGNOSTICS.

  5. Press the Select select.gif button to select DIAGNOSTICS.

  6. Press the Down arrow down.gif button to highlight PQ TROUBLESHOOTING.

  7. Press the Select select.gif button to select PQ TROUBLESHOOTING.

  8. Pick up the PQ troubleshooting pages.

  9. Return to your computer to continue the troubleshooting procedure.
The message PRINTING... PQ TROUBLESHOOTING displays on the control panel until the printer finishes printing the PQ troubleshooting pages. The printer returns to the Ready state after printing the PQ troubleshooting pages.

Feb 17, 2011 | HP LaserJet 3600n Printer

1 Answer

I want to test printer with no conection to the PC only test page. What buttons Can I press for to print test page directly of printer?


Hi, you can't print a test page directly from the printer, but since it's a copier also, you can copy a page of text or graphics to make sure everything prints okay. Just place a piece of paper on the glass and press either the black or color copy button. (The computer must be on to make a copy.)

Sep 26, 2010 | Lexmark P3150 All-In-One InkJet Printer

2 Answers

Brother MFC 5860cn magenta color is not printing. I printed the test page and did cleaning on it but the magenta color is not showing on the test page. The only colors showing are Black, Yellow, Cayan.


This can happen if the ink dries out for a long time. Try to power flush the color that doesn't work.

Press the Menu/Set, *, 2, 8, 6 and 4 keys within two seconds. (if you fail to complete the correct key sequence within two seconds, press the Stop key to try again).

press 7 then 6 then 4 then start black copy. This will fill the tubes with ink.

press 7 then 6 then 3 then start black copy. You may use the right arrow to choose the color you want to flush before you press the black copy button.

Press 99 to exit maintenance mode

Press the ink button and do a test print for print quality and see if the color you flushed works. If not, try again.

This is the only way to fix the dried print head. Otherwise you have to replace the print head, in which case, you might as well buy a new printer.

Aug 03, 2010 | Brother MFC-5840CN All-In-One InkJet...

1 Answer

Color test pattern page prints every time I make a copy


IN THE PRINTER SETTINGS YOU MAY HAVE THE "PRINT TEST PAGE" SELECTED

Jan 10, 2009 | HP DeskJet 5550 InkJet Printer

1 Answer

The printer prints fine in black, but will not print in color.


try to make a color copy from the all-in-one and if it prints good, then try to print a test page from the computer and check whether the color is printing or not, if the color is printed then check whether the print in grayscale option is enabled or not, if it is enabled please disable it.

May 21, 2008 | HP OfficeJet 6210 All-In-One InkJet...

2 Answers

I cannot print in color from my desktop computer. It is wired to a toshiba estudio 3500c.


hmmm..

you'll need to run a test page first..

what kind of printer you have?

May 13, 2008 | Office Equipment & Supplies

1 Answer

HP LaserJet 3550 spits out blank paper when job sent from computer but prints fine when printing directly from printer


Try connecting the printer via the USB port on either one of the computers. Then test if the machine prints fine then likely possibility is that the Network interface card is faulty remove the network card and install in a different slot and test. If the same thing happens then reinstall the drivers and test.

Hope this helps
Thanks J

Jan 27, 2008 | HP Color LaserJet 3500 Printer

1 Answer

No Color Suppy Error Code


Try cleaning the print connectors on the cartridge housing area with a q-tip. This should resolve your problem, or else try to run ink cartridge test on your copier. Let me know if this fix your problem.

Mar 23, 2007 | HP 610 Color Copier

Not finding what you are looking for?
HP OfficeJet 6110 All-In-One InkJet Printer Logo

1,061 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Vinaya Kumar...
Vinaya Kumar...

Level 3 Expert

1121 Answers

Seeker5211
Seeker5211

Level 3 Expert

1088 Answers

kakima

Level 3 Expert

98829 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...