Question about Kenmore Elite HE4 Electric Dryer
Our Kenmore Elite Dryer is nine years old and was close to finishing a load of clothes when it suddenly became very very hot to the touch and the final cycle stopped. The dyer now will not restart. The electrical panel breaker did not pop and the dryer vent and lint screen area are clear and unrestricted. The service information points to a "Thermal Cut-Off" as a potential problem. Where is this located and can a DIY person handle this repair? Could this problem be something other than the "Thermal Cut-Off". Any help would be greatly appreciated. Thanks... Perplexed Jake
Yes, a DIY person can replace a thermal cutoff. just open the rear of the unit and look for parts with big red wires connected to it. it is round, one small and one big. both have two terminal clips.
if you can find the schematics inside the switch panel, then it would help you further. the thermal cutoff consist of two pc. replace both even one of them has continuity.
tnx 4 using fixya,
Posted on Sep 29, 2008
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Sep 12, 2011 | Kenmore Oasis HE 27082 Top Load Washer
Mar 02, 2010 | Kenmore Dryers
Oct 04, 2009 | Kenmore Elite 45986 Front Load Washer
Jul 12, 2009 | Kenmore Elite HE4 Electric Dryer
May 27, 2009 | Kenmore Elite 45986 Front Load Washer
Sep 02, 2007 | Kenmore Elite HE4 Electric Dryer
Jul 30, 2015 | Kenmore Elite HE4 Electric Dryer
349 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: