Question about Sony XL-2100U Projector Lamp for KF-42WE610, KF-50WE610, KF-60WE610, KDF-60XBR950, KDF-70XBR95

Open Question

Sony KF60WE610 We've had this unit for 4 years and I know the bulb will need to be replaced soon. The brightness is cranked all the way up and it's been 4 years. The red replace lamp light has not lit up yet. However recently all high def video input (DIV & component connection) went black simultaneously. (Inputs 1-4 work fine 5-7 are now black) Might the lamp replacement cure the problem with Hi-Def? Or is it probably going to be more costly and complicated. Any advise or input would be appreciated. Best regards

Posted by on

  • JeffLuebke Oct 08, 2008

    As a follow up.

    I replaced the lamp but this didn't resolve the issue with the high def inputs.

    Back to the drawing board.

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Sony WEGA KV-34HS420

check your cable

Posted on May 12, 2007

SOURCE: Won't piwer on

Tried to turn it on? Sounds like you need to replace the lamp. However, I got an additional week out of my unit. Although poorly dimmed and the red Lamp light blinked constantly for that one week, at least it gave me enough warning to seek out a replacement. But so long as you're not mistaking the Power/Standby or Timer light for the Lamp light then I would have to agree with you. http://store.l-f-l.com/prod/A-1606-034-B Includes shipping to the United States and no sales tax outside of California.

Posted on Aug 22, 2007

Shuttle83
  • 1139 Answers

SOURCE: sony kf60we610 brightness problems

The problem might be with the circuitry driving the LCD screen. Since the back lighting blub has been changed the only thing that could cause this issue would be the screen brightness which is controlled by the LCD circuitry. You will need the schematic to aid you in the measuring of these voltage values.

Posted on Nov 15, 2007

circuitcity
  • 137 Answers

SOURCE: Color quality has degraded

Since this yellow tint color in on both HDMI and your composite input you may have a bad lite engine. This part is very expensive. There are no other way out. sorry. Part number A-1123-071-A
Average cost $504.00

Best regards
Circuitcity

Posted on Dec 10, 2007

SOURCE: 60 " SONY KF60WE610 screen went greenish

Replace the Scaler board

Posted on Mar 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brightness problems with sony kf-50we610


This is typical for a set that uses a lamp, as the lamp needs to warm up.

If it is taking longer than normal to brighten up, then your lamp could just be aging and needs replaced.

Jun 19, 2012 | Sony Grand WEGA KF60WE610 60" Rear...

1 Answer

How do I know if I need a new lamp?


Hi,
Yes, if you have not replaced the lamp since you purchased this TV.
Lamps usually last about 6000 hours.
I've seen lamps last much longer than 6000Hrs, it all depends on the usage.
Remove the lamp from the TV and do a visual inspection, see if there's a crack on the glass or the bulb.
If the TV is few years old then the Lamp may be bad.

Buy original Lamp: 800 638-3328
https://www.encompassparts.com/

DO NOT BUY the cheap lamp from ebay

Good luck to you.

Nour Sabre
www.tvservice.com

May 24, 2012 | Sony Grand WEGA KF60WE610 60" Rear...

1 Answer

Sony kf-60WE610 green light flashing consistently


Hi,

The symptoms you've mentioned is an indication that the lamp needs to replaced because it is already burnt out. You've said that the lamp was replaced 3+ years ago, then you have to replaced it with new one to resolve the issue.


Mjsazon

Jan 13, 2012 | Sony Grand WEGA KF60WE610 60" Rear...

1 Answer

Hi, About 3-4 weeks ago I replaced the bulb on my


I am having the same problem as mg2low. I changed the lamp, but my Sony KF60WE610 still will not turn on. It flashes green several times then it begins to flash red. Can you recommend some trouble-shooting for me? Thanks, Richard

Sep 05, 2010 | Sony Grand WEGA KF60WE610 60" Rear...

1 Answer

I have a sony kf-60we610 2004 and the bulb is good, but the tv doesn't stay as bright as it use to and I have the brightness max out. any ideas?


IF the lamp has been in the set for a while it may be your problem---some of these sets before the lamp fails the picture will get darker--lamp will look ok but can cause this trouble.

If you replaced it at some time with a "Generic" replacement other than an Original Sony--that can also be the trouble.

Lamp life is about 2,000 hours and time can pass quickly.

Let me know if I can help--I am here to help.

if this information helped you rate this solution as I do this here for free.

SD TECH

6bc0523.jpgSony XL2100U lamp.

Dec 26, 2009 | Sony Grand WEGA KF60WE610 60" Rear...

1 Answer

I have had my Sony KDF-60WF655 unit and the screen is going dark.


The screen is dull but I can see the picture , Will changing the bulb help?

Sep 06, 2009 | Sony Grand WEGA KF60WE610 60" Rear...

1 Answer

LCD Sony TV - Skwiggly line


Hey there I think the problem is coming from your LCD chips not your bulb, the bulb has nothing to do with the color or skwiggly lines it just shoots out white light,your LCD chips are burnt and the problem will not stop by changing your light bulb you need to replace the OPTICAL BLOCK the skwiggly line will just get worst with time
hope this helps


please rate this solution !!!!

Oct 12, 2008 | Sony Grand WEGA KF60WE610 60" Rear...

1 Answer

Dead sony


The $1200 was for the lcd engine not the lamp. You should change the lamp. The buzz is the power supply trying to light the lamp.

Apr 25, 2008 | Sony Grand WEGA KF60WE610 60" Rear...

1 Answer

Sony dead !!!!


Jedi,
Sounds like lamp and driver need to be replaced again... Lamp is Sony p/n# A-1052-675-B and the driver p/n# 1-468-798-14
Bill

Apr 24, 2008 | Sony Grand WEGA KF60WE610 60" Rear...

1 Answer

Sony kf60we610 brightness problems


The problem might be with the circuitry driving the LCD screen. Since the back lighting blub has been changed the only thing that could cause this issue would be the screen brightness which is controlled by the LCD circuitry. You will need the schematic to aid you in the measuring of these voltage values.

Nov 13, 2007 | Sony Grand WEGA KF50WE610 50" Rear...

Not finding what you are looking for?
Sony XL-2100U Projector Lamp for KF-42WE610, KF-50WE610, KF-60WE610, KDF-60XBR950, KDF-70XBR95 Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Office Equipment & Supplies Experts

shaun taylor

Level 3 Expert

1525 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

Are you a Sony Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...