Question about Pioneer DEH-P4600 CD Player

2 Answers

PLAYING IPOD THRU SYSTEM

SONY 52WX4, HAVE AN ADAPTER FOR PLAYING IPOD THRU SYSTEM. WE HAVE LOST STERO INSTRUCTIONS, CAN'T GET THE IPOD TO PLAY THRU RADIO. WHEN WE PRESS THE SOURCE BUTTON ON THE STEREO NOTHING HAPPENS, EVEN ON THE REMOTE IT DOESN'T WORK. WE COULD USE THE INSTRUCTION BOOKLET. THANK YOU

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 84 Answers

1st check the volume on the Ipod
2nd check the plug make sure it;s not bent
then go to the stereo and fo to the setup program in the sony menu system
the simplist thing would be to go to the reset ..
But you can go to the AUX setting as there is a volume you can adjust to make your Ipod the same volume as the cd and radio, a sony feature,,,, I can provide more assistance if I get the model of stereo and adapter you are using
LB

Posted on Sep 29, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,894 Answers

I think you will have to try a new adapter for getting this problem fixed.

please use a new one

Posted on Sep 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No sound when song is playing on my car stereo from ipod and my volume is loud enough to be heard


What kind of radio do you have? whats the model # of the radio? how do you have the ipod connected? Is it thru usb or 3.5mm aux jack? what model ipod do you have?

Oct 20, 2014 | Car Audio Receivers

1 Answer

How do I get faceplate off sony 52wx4


52wx4 is not the model number of the stereo...it is just purely stating the power that the stereo can handle...which is 52watts x 4...2 front speakers and 2 rear speakers...52watrs going to each

Dec 04, 2012 | Sony XPLOD CDX-GT200 CD Player

1 Answer

CD changer output not working


There is an obscure setting for 'AUX' on/off that is hard to find unless you know what you're doing or looked in the manual. Typical Pioneer for ya.

Apr 19, 2009 | Pioneer DEH-P3600 CD Player

1 Answer

Cannot play ipod touch on car stereo


hi there

You will need one of theses:

Click Here

This is a USB to Stero adaptor... will fix your problem for you.

hope this helps

alex

Apr 06, 2009 | JVC AM FM CD DET FACE CAR STEREO

1 Answer

Trying to play Ipod through my Alpine cda-9811


you need to set up your system to accept aux. this means you will need to set the 'aux on', as the default setting is 'off'. use the manual and refer to page 23 & 24. please read the instructions carefully, as they are slightly confusing.

Mar 15, 2009 | Alpine CDA-9811 CD Player

2 Answers

Subwoofer doesn't play through ipod, only radio and cd's


Hook up the remote wire from the head unit (grey w/ orange stripe) to the power antenna wire (blue) on the wiring harness adapter.

Jan 15, 2009 | Alpine iDA-X200 Car CD/ MP3 Player

2 Answers

No sound with iPod Adapter CD-IB100II in the DEH-P2900MP


on the radio and the adapter their is a spot for the cord that connects the two the ends have different colors on them it should be purple and black just make sure the colors are matched up if they are off it will still read all the info and say its playing but no sound will come out

Oct 15, 2008 | Pioneer DEH-P2900MP CD Receiver...

1 Answer

Engine noise only when playing ipod through line in adapter


Did it always make noise or did it start recently? You need a ground loop isolator. That usually clears up the engine noise.

Feb 28, 2008 | JVC Sirius KD-LH300 CD Player

1 Answer

Got an aux cord to plug my ipod in, doesnt switch to "aux in" mode


According to the manual, you need to "enable" the AUX 1 or 2 thru the initial settings menu.

Press and hold the SRC until the unit turns off. Then press and hold the MULTI CONTROL (knob) until the Language appears. Turn the knob to cycle thru the options, select AUX 1 or 2 and press the knob again to select ON.

After selecting them to on, power the unit on and press the SRC to cycle thru the sources to find AUX 1 or 2.

The owners manual is here if you need it;

http://www.pioneerelectronics.com/pna/v3/pg/support/details/0,,2076_310070337_338818745,00.html



Best of Luck.

Nov 18, 2007 | Pioneer DEH-P6900UB CD Player

3 Answers

Auxillary option not available in menu


Try putting the unit in standby via the "SRC" button FIRST..., then press the menu button and cycle through to the "AUX 1" option and activate this....then press menu button again. When the unit is next switched on, you should have an "AUX" option accessible via the "SRC" button which will cycle through all of the availale modes ....standby-tuner-cd-aux etc etc.

Jul 01, 2007 | Kenwood KDC-MP628 CD Player

Not finding what you are looking for?
Pioneer DEH-P4600 CD Player Logo

300 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Audio Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you a Pioneer Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...