Question about GE Profile Spectra JGBP90 Gas Kitchen Range

1 Answer

Temperature control I have a GE Spectra gas oven.If you set your bake temp to lets say 350,the oven will heat to that temp but in time several minutes the temp will drop.The diplay will still say 350.If you turn off oven and restart the display will read a lower temp ie 265 and climbing back to 350.The oven will not keep the temp set for baking.There are no codes displayed.

Posted by on

  • 2 more comments 
  • Anonymous Oct 16, 2008

    Our oven is an electrical but it has the same problem...

  • Anonymous Mar 12, 2014

    the F5 symbol displays when trying to set oven temp.

  • Anonymous Mar 14, 2014

    lower oven heats up to 350 preset temp, then cycles off a few minutes later. As it goes off...there is a double beep and the word BAKE flashes on the console.

  • Anonymous Mar 31, 2014

    set over at 350 convention bake and oven drops temp and not keep temp

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • GE Master
  • 2,651 Answers

Sounds like a bad bake ignitor(uneven heat,long cook times, long preheat times, perhaps even gas smell while cooking)

Posted on Oct 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gas range temperature control does not work


my oven is propane. if i set it for say 350 it will heat up then drop down to 150. it won't hold the temp.

Oct 28, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

My GE Profile Spectra oven is taking approximately 10-15 minutes to preheat to 350 degrees and does not seem to fully bake food as per instructions. It takes an extra 5 to 20 minutes to bake anything. ...


18 mins from room temp to 350 is factory standard,
you may need to calibrate the range, most now adays come factory set at -25 degrees for safety
depending on your model number in your instruction manuel should be a part about recalibrating it sounds like your about 25 degrees off

Oct 02, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Oven temp control not working


you need to calibrate the oven.

go to this web site

http://genet.geappliances.com/geasearch/Dispatcher?REQUEST=GETSEARCHRESULT

the second in the list is your solution

Dec 02, 2008 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Items are not baked all the way through


Put a thermometer in the oven to see how the temp is vs what you set it at. If temp is off by more than 25 degrees replace the oven sensor. I cannot see your repyl due to some tech issue w/ the site, so it may be a day or so before I can reply again. Please leave feedback for me if appropriate. Thanks

Nov 28, 2008 | GE Spectra JBP78 Electric Kitchen Range

1 Answer

Oven not heating properly


HI thanks for your question. the problem you have is with the bake igniter. a common problem with gas ovens the igniter should be replaced. thanks the appliance doc.

Oct 08, 2008 | GE Profile Spectra JGBP90 Gas Kitchen...

2 Answers

GE Spectra XL Oven does not maintain oven temperature


I have the exact problem. We had the ignitor replaced 2 already and it works for 18 months and stops. Occasionally, it the oven won't even start to heat. I am ready to throw it out.

Sep 14, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Digital Control (for oven temp and clock adjustment) not working


Puzzeled, usually when there is a stuck or shorted keypad there will be an error code. First let's see if we can tell if we are in Centigrade or Ferenhiet. Press the bake and broil button together for 2 or 3 seconds. SF should appear in the display. Press the broil pad again and C or F will be displayed. Toggle to F and press start. See if that was the problem. If not try to increase the speed of the + and - keypads. Press bake and broil together for 2 seconds until SF displays. Press the + keypad increase the speed of the control. It should toggle from 1 to 5, 5 being the fastest. Press start and see if that works. If niether works..then have someone remove the keypad ribbon cable from the control board and clean the ends with an eraser. See if that solves the issue...Catriver..post back and let me know.

May 12, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Oven stuck on pre-set temperatures!


Replace Electronic Range Control (ERC)and touch pad sorry .

Jan 20, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...

Not finding what you are looking for?
GE Profile Spectra JGBP90 Gas Kitchen Range Logo

677 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

yadayada
yadayada

Level 3 Expert

61292 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...