Question about Phones

1 Answer

I just purchased a optional accessory handset model kx-tga430b to go with base unit kxtg4321b. instructions say to hold handset on locator for 4 seconds then press ok, unit will register then signal. unit says it is registering but does not keeps saying try again - error - registering etc. unit remains dead and useless. base unit works fine.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I returned he item to the store and got my money back.

Posted on Sep 30, 2008

  • ff2wkupp Sep 23, 2010

    (Got this from a Panasonic Support Tech...Thanks Panasonic!)

    The following steps should help....

    Resetting Handsets

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Manual for KX TGA430B


The manual for the KX-TGA430B is available on the product support page: http://shop.panasonic.com/support-only/KX-TGA430B.html . The direct link to this handsey manual in English is ftp://ftp.panasonic.com/accessory/phone_fax/kxtga430b/kxtga430b_om.pdf . However, I think you need the manual for the base unit, in addition to the information from your telephone provider. For example, this handset works with the KX-TG4321B. The manual for that is here: http://service.us.panasonic.com/OPERMANPDF/KXTG4321.PDF . The information on Voice Mail is on pages 36-37 of the manual.

I hope this helps.

Cindy Wells

Sep 14, 2015 | Panasonic KX-TGA430B Cordless Phone

1 Answer

My phone display's No link to base. Reconnect main bas AC adapter. It is plugged in what now?


I had this problem, and I fixed it by re-registering the phone to the base. Here are the directions for how to do that from the manual:


----->

Registering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base
unit, re-register the handset.
1 Handset:
{MENU}
2 {V}/{^}: "Initial setting"
{OK}
3 {V}/{^}: "Registration"
{OK}
4 {V}/{^}: "HS registration"
{OK}
5 Base unit:
- KX-TG4011 series:
Press and hold {LOCATOR} for
about 5 seconds. (No registration
tone)
- KX-TG4021/KX-TG4071 series:
Press and hold {LOCATOR} for

about 5 seconds until the
registration tone sounds.
If all registered handsets start
ringing, press the same button to
stop. Then repeat this step.
The next step must be completed
within 90 seconds.
6 Handset:
Press {OK}, then wait until a long
beep sounds.
Note:
While registering, "Base in
registering mode" is displayed on
all registered handsets.
When you purchase an additional
handset, refer to the additional
handset's installation manual for
registration.
<-----

See http://service.us.panasonic.com/OPERMANPDF/KXTG4011-MUL.PDF (page 22)

Dec 06, 2011 | Panasonic KX-TG1033S Cordless Phone

1 Answer

I am trying to register my panasonic kx tga641es to the base. I have no instructions/user manual...can anyone help please???


I have similar model and setup should be the same..
1, Handset: press Menu
2, Handset: scroll using up/down arrow keys to "Initial setting" then press soft key Select
3, Handset: scroll to "Registration" press soft key Select
4, Handset: sroll to " HS Registration" press soft key Select
5, Base Unit: Press and hold (LOCATOR/INTERCOM/TRANSFER) for 3 seconds. The Charge indicator flashes. After the CHARGE indicator starts flashing, the rest of the procedure must be completed within 1 minute.
6, Handset: 1: press soft key OK
2: wait untill a long beep sounds and the display shows the new extention number
**Registration should be complete**

Aug 25, 2011 | Panasonic KX TGA641ES 1Line Cordless...

1 Answer

Phone keeps saying move closer to base


The handset may have unregistered from the phone. The instructions to reregister it are in the manual, but I'll list them here for you.

1. On the handset, press MENU 001
2. On the base unit
For models KX-TG6021/KX-TG6022/KX-TG6023
Press and hold LOCATOR until the IN USE indicator flashes.
For models KX-TG6051/KX-TG6052/KX-TG6053/KX-TG6054
Press and hold LOCATOR/INTERCOM until the IN USE indicator
flashes.
After the IN USE indicator starts flashing, the rest of the procedure
must be completed within 1minute.
3. Press OK on the handset, then wait until a beep sounds.
4. Press OFF on the handset.

Aug 29, 2009 | Panasonic KX-TG6021 Cordless Phone

1 Answer

TOO FAR FROM BASE


Hi! This may cure your problem!
Re-registering the handset
If “No link to base. Move closer
to base, try again.
” is displayed
even when the handset is near the base
unit, you may need to re-register the
handset to the base unit.
Important:
LMake sure the base unit is not being
used.
LHave the handset and base unit near
each other when re-registering the
handset.
LKX-TG5422 and KX-TG5423 only:
Confirm the extension number of the
handset which has lost its link to the
base by placing the handset on the base
unit or charger.
If you accidentally assign another
handset’s extension number to it, the
other extension will stop functioning.
1 Handset:
Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
3 Scroll to “Registration” by pressing
{V} or {^}, then press {>}.
4 KX-TG5421 base unit:
Press and hold {HANDSET
LOCATOR
} until the CHARGE
indicator flashes.
KX-TG5422 base unit:
Press and hold the handset locator
button that corresponds to the handset
you want to re-register ({HANDSET
LOCATOR
1} or {HANDSET
LOCATOR
2}) until the CHARGE
indicator flashes.

Below is a link that will take you to the instruction manual for your phone.

http://www.phone-manuals.com/panasonic/KX-TG5422M.shtml

Hope this helps! Hal

Feb 27, 2009 | Panasonic KX-TG5422M Cordless Phone

3 Answers

No KX-TGA101S communication with KX-TG1033S


The additional handsets must be registered to the base unit. Here are the instructions from the manual:
HANDSET
1. [menu}
2. "handset settings" - OK
3. "Registration" - OK
4 "HS registration" - OK
BASE UNIT
Press and hold [LOCATOR] until the registration tone sounds.
-if all registered handsets start ringing, press {LOCATOR] to stop, then repeat this step.
-after the base unit beeps, the rest of the procedure must be completed within 1 minute and 30 seconds.
HANDSET
Press [OK], then wait until a beep sounds and Y stops flashing.

Jan 31, 2009 | Panasonic KX-TGA101S Cordless Handset

1 Answer

Sync a new handset to kx-tg5632 phone


This works on MY panasonic; May work on yours too!

Registering a handset
The included handset and base unit are
preregistered. If for some reason the
handset is not registered to the base
unit, register the handset.
1 Handset:
{MENU} i {0}{0}{1}
2 Base unit:
Press and hold {LOCATOR/
INTERCOM} until the IN USE
indicator flashes.
LAfter the IN USE indicator starts
flashing, the rest of the procedure
must be completed within 1
minute.
3 Handset:
Press {OK}, then wait until a beep
sounds.
4 {OFF}
Registering an additional handset
See page 5 for information on the
available model.
Start from step 2.

Dec 29, 2008 | Panasonic KX-TG5632 Phone

2 Answers

Re-registering the Handset is not working


The solution is this - unplug the base unit then plug it back in. After that it worked fine.

Jun 22, 2008 | Panasonic KX-TG2356 Cordless Phone

2 Answers

Got instruction to unregister KX-TG6074B


spacer.gif
If this error message displays on your handset, please follow the instructions below to deregister your old handset before registering a new handset.

ts_hsinset_8handsets.gif

1) On the base unit:
Press: FUNCTION or PROGRAM
Button name varies by phone model.

2) Press: MUTE

3) Enter the numbers 3, 3, 5, #

4) Enter the handset number (1 to 8)

Mar 14, 2008 | Panasonic KX-TG2740 Cordless Phone

6 Answers

DeRegistering a Damaged Cordless Phone???!!!!


I have a Panasonic KX-TG6700 base unit and KX-TGA670B handsets. We had a similar problem where we were no longer able to deregister the handset using the handset itself. We wanted to be able to use that slot that the broken phone was still occupyng. The solution that we found in the manual online was to hold down the intercom button for 3 seconds until the "in use" light turned on. Then press and hold the number of the extension you want to deregister until it beeps. At this point the base unit has freed that extension.

Nov 05, 2007 | Panasonic KX-TGA600B Cordless Expansion...

Not finding what you are looking for?
Phones Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phones Experts

kakima

Level 3 Expert

96333 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4751 Answers

Are you a Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...