Question about Norcent Technologies LT-2722 27 in. LCD Television

1 Answer

Cant find the code to set my tv for the dish's remote control

I just bought this tv from a friend and he didnt have a remote control for it. Ive been trying to figure out a code for this tv for my dish network receiver's control but I havent found one yet.... if anyone would help me get this code I would apreciate it or would tell me where to purchase a control for this type of tvv.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 49 Answers

Usually the remote has a scanning option where you enter certain button commands. some are automatic but some require pushing a button until the device reacts, but i have a tendency to go to fast and pass it up. sure am glad when the instruction manual tells how to go backwards with the scan....lol...... the manual for the dish reciever should explain exactly how to do this as well as some common codes. i found that even if mine is not lsted, someimes the codes for a different type of device by the same or similar manufacturer woll be correct. if you do not have the manual i am sure dish has it on their website. oh...........pretty much any standard after market remote you cam purchase will work, and buy one that has the auto scan....lol............it is so much easier than pushing a button 100 or more times.

Posted on Sep 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just bought a new tv. It's a proscan model


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls.If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Pull up older posts. Search the sites by type in the brand name to your device, in its search box.It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Code list to dish remote is given.

Oct 06, 2014 | Flat Panel Televisions

1 Answer

Need tv code, to give to Dish TV, for my new Cielo TV


If you wish to buy its original remote control, you have to contact the authorized service center. If you wish to buy a universal remote control, you should know about, which brand remote control have setup code to your TV/device brand. You should first make sure about the number of digits in the codes to your device have. There are 3-digit, 4-digit, 5-digit and even 2-digit codes. You can get this detail by the code list attached to every universal remote control. The brand name of the remote control you select isn't a matter; but, its code list should have setup codes to your TV/device brand, otherwise you can't set it up with your device. Check this link and note which brand remote control have set-up codes to your device brand, and buy that brand remote control, according to availability. For more information check this link. Setup procedure, and setup code list to many popular remote controls are given. Pull up older posts

Dec 07, 2013 | Flat Panel Televisions

2 Answers

Dish network remote control and akai tv


Not likely the Dish remote will have that remote code at all in it--some of those sets were made by Samsung so try those codes also.

Jun 01, 2012 | Akai PDP4294 42 in. EDTV-Ready Plasma...

3 Answers

Does anyone know the remote code for a sanyo tv model dp42647 on a dishnetwork remote


Remote Codes ' MyDISH ' DISH Customer Support

https://www.mydish.com/support/remotecodes
Remote Control Manuals · Program Remote to TV/Other .... remote, product type, and manufacturer below to see the current known remote codes you should try.

My Dish remote needs programming for Sanyo TV ... - Directly

https://www.directly.com/.../dish-network-my-dish-remote-needs-progra...
My Dish remote needs programming for Sanyo TV, Model DP226649. My Dish ... Needcode. Alta asked this ... Dish Network • 16808 answers • 95% helpful. Code is ... Test volume control, if it works you're set ... try 590 it should work. tivosat.

How do I program my dish remote to work for my Sanyo TV.

https://www.directly.com/.../dish-network-how-do-i-program-my-dish-re...
Dish Network. How do I program my dish remote to work for my Sanyo TV. ... entercode 590 press pound then sat Then try to turn tv on and off then try volume.

How do you program a dish network remote to my sanyo tv? ' Ya


Jan 09, 2012 | Sanyo 42 in. LCD TV

1 Answer

I have bought a brand new lg tv from sams. I suscribe to the dish network. I can program the dish remote control mto turn the lg tv on, but the remote will not adjust the volume ! The dish remote is new...


Hello there!!!!! If your remote is giving you troubles, you can try a power scan, which scans through each code for the tv until you reach the correct one. Just follow the link provided below, and begin the scan. Remember when you are done programming your remote, press the SAT button on the top left of the remote. Hope this helps!!!
http://www.dishnetwork.com/SupportSection/power-scan-instructions



Becki Barned
DISH Network Customer Service

Dec 08, 2010 | LG 50PG20 50 in. Plasma HDTV

2 Answers

Program sony remote to operate dish vip722


The Sony RM-YD029 Remote control will work with the Dish Network VIP722 DVR HD Satellite Receiver, but the Dish Network VIP722's Primary remote address must be set to 1.

The procedure below will allow Sony RM-YD029 remote control to operate Dish VIP722.

Using the Dish Network Remote Control -
1. Press menu 2 times to get to system info page
2. In the system info page the primary remote address is in a white box (bubble) followed by a Green TV (1)symbol that says IR and indicates you the channel your remote control one is configured. The Sony RM-YD029 will work when this primary remote address number (in the white box) is set to 1.

If the Primary Remote Address of your VIP722 Remote control 1 is not set to channel 1, here is how to change it:

1. While displaying the system info page, press and hold the SAT button on your dish network remote until all other modes are flashing, about 3 seconds.
2. then press the '1' button on the numeric pad of your dish remote
3. then press the '#' button on the numeric pad of the dish remote
4. then press the 'record' button (red dot button - stores setting)
5. At this point you should see a number 1 in front of the primary remote address on the dish system info page

Ensure you enter the corresponding IR code into your Sony remote control per the instructions in the manual or Sony's web site. My 722 works with Sony IR code - 01775.

Sep 08, 2009 | Sony BRAVIA XBR 52 in. LCD Flat-Panel HDTV

2 Answers

Need Dish DVR ViP722 remote code.


If you are looking to have the Dish remote operate your TV, just do a random search for your tv. First, hold down the tv button on the dish remote until all the rest of the light up. Next press the tvpower button on the dish remote. Next, press the channel up button (this is the up arrow button) until the set turns off. When it does turn off, press the # key at the bottom right of the remote. The tv button will light and flash twice. That's it. Your done. Hope this helps.

Feb 20, 2009 | Sony BRAVIA XBR 52 in. LCD Flat-Panel HDTV

1 Answer

Remote control setup


please follow the steps below:

TV
RED + SELECT
TV
0056

try your volume button if this works press the SELECT button to save the code. if not press TV and then try the volume again. repeat this step until the volume works. then remember to press the select button to save the code

cheers

Little Dish Fitter

Jan 07, 2009 | LG 42LC2D 42 in. LCD HDTV

2 Answers

Need sabre tv code for universal remote?


The code for Sony televisions work.
0128 works for the GE Universal remote.

Dec 08, 2008 | Flat Panel Televisions

2 Answers

Need codes for Emerson on the DISH remote


I just posted this (modified) to another victim-

Check the manufacturer's site to see if they have updated the code lists for your respective remotes.
I have two newer sets for which there are no codes too.

Seems like the term 'multibrand' remote might be more accurate than the common 'universal.'

Anyone interested in a class-action suit to get some accuracy in product descriptions?
Another example of a useless government agency: FTC

Jun 29, 2008 | Emerson EWL20D6 Television

Not finding what you are looking for?
Norcent Technologies LT-2722 27 in. LCD Television Logo

424 people viewed this question

Ask a Question

Usually answered in minutes!

Top Norcent Technologies Flat Panel Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Jose Velazquez
Jose Velazquez

Level 2 Expert

227 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Are you a Norcent Technologies Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...