Can't hear anything in my bluetooth headset, mic is working
After connecting a bluetooth headset to my t-mobile touch all seems working, but when I try to answer a call via my headset( HTC BHM200) people can hear me but I can't hear anything thru the headset. I hear a musictone when I have a call, but when I want to answer it, there's nothing. The voice of the caller stay's on my mobile phone ! I've tried several other headsets, like Nokia, and samsung but no success !
Re: Can't hear anything in my bluetooth headset, mic is...
Hi--First, make sure your "mute" function is off. Try holding both volume buttons at the same time for a second or two. If that doesn't help, while you're having a conversation, either with or without bluetooth, make sure your phone's volume is turned up. On a lot of phones the volume button will control both ringer and conversation volumes, but turning it up without the phone in use only affects the ringer volume. My husband thought there was something wrong with his bluetooth until we noticed his phone volume was set too low--not as noticeable on handset, but bluetooth apparently needs volume up pretty high!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The T-Mobile G1 doesn't actually support file transfer through bluetooth :S So it's not faulty, it's just not programmed to do that. Sorry! However it should be able to find your bluetooth headset, it always finds mine. Maybe the headset is faulty?
HI, THIS IS VISHU HERE, IT SEEMS THAT THERE IS SOME PROBLEM IN YOUR AUDIO SOCKET.THE SOCKET WHERE WE CONNECT THE EAR PHONE , BCOZ NORMALLY WHEN WE CONNECT THE EAR PHONE ON A GOOD WORKING DEVICE IT CUTS THE AUDIO FROM MAIN SPEAKERS/MIC AND ROUTE IT TO EARPHONES , THIS FUNCTION IS PERFORMED BY METALIC CONTACTS PRESENT WITHIN THE SOCKET THE PROBLEM IS WITH THESE CONTACTS MEANS THESE CONTACTS ARE REMAINING IN CUT OFF POSITION EVEN AFTER REMOVING THE EARPHONE . TRY TO GET UR SOCKET REPLACED , HOPE IT WILL SOLVE UR PROBLEM.
i encountered this problem after i started using a bluetooth headset. when the headset is not in use (not turned on, not even with me), sometimes there is no sound from the speaker, and the other party cannot hear me. meanwhile, the call timer is clicking away indicating the call connected. it seemed there was some issue in the bluetooth stack, and the phone thought it should be communicating with the BT device rather than it's onboard speaker/mic. to resolve, i disconnect the call, go to the main screen; in the bottom right corner, use the bluetooth manager icon to turn BT On then Off again. this resets the phone's speaker/mic usage, and calls can be made like normal. i hope this helps you.
jamin is not silent. jamin can vibrate but wont ring. music works fine only if though a headset. calls work fine only if through a headset. was working fine playing music and then we tried to make a call after pulling out the headset and got no audio and as it was expecting a headset it wasnt picking anything up from the mic. maybe its a mic issue? ie mic died so jamin switches to headset? just thought of that so will investigate.