Question about HP LaserJet 2840 All-In-One Printer

1 Answer

Hp 2840 Laser Jet wil not power on

HP laser jet 2840 will not power on.

I have checked-
1. Power cord - OK
2. Power source (240 volt.) (Australia) OK

3. There are no lights on the control panel.

4 There is no power indicator LED light on at the rear of the machine(if one exists)
5. Power on off switch obviously no effect.


This machine is unused but unfortunately out of warranty.
HP wants big money to fix. I have had a technical background before retirement and therefore might be able to fix with some expert assistance.

Kind Regards,

Richard S.

Posted by on

  • pastoribnv Oct 03, 2008

    When I used a compatible ink cartrige, the printer became misaligned and it was not printing correctly. I followed instructions to correct mis-aligning, pur everything back together the same, butnow I try to turn it on and nothing happens - no power, nothing. Check cord, power source.



    Any ideas?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

This sounds like a low voltage power supply issue. your low voltage is soley for powering up the machine 
part number RH3-2260 

Posted on Nov 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My hp 2840 all in one laser jet printer squeaks when it is printing. How do I lubricate my 2840 HP laser jet printer?


Corosol technology is older,slower sounds also too high, it is not suggestible to lubricate the moving parts because of cartrides will move while printing result lot of toner particles raises in printer chamber,if this particles deposited on lubricated area will abstract the moving spares. If you can do the periodical maintenance, use silicon grease for moving parts..

Sep 28, 2011 | HP LaserJet 2840 All-In-One Printer

1 Answer

Scaner error 52 in my laser jet printer printer model :-hp laser jet 3052 all in one printer


52 Scanner Error
The all-in-one has experienced an internal hardware error.

1. Turn off the power by using the power switch, and then wait at least 30 seconds.
2. If a surge protector is being used, remove it. Plug the all-in-one directly into the wall socket.
3. Check the FFC connection between the formatter and the scanner.
NOTE Do not bend or fold the FFCs during the removal or reinstallation process.
4. Try connecting the product to a different power source or surge protector.
5. Turn on the power and wait for the all-in one to initialize.
6. If the error persists, replace the laser scanner assembly.

Jul 12, 2011 | HP LaserJet 3052 All-In-One Printer

1 Answer

Hp colpr laser jet 2840 machin showing error 3 .what is a problem


Hi,
Welcome to Fixya Support
I am Michelle, and i will be assisting you regarding the issue
please take out the print cartridge
wait for the insert cartridge message to appear
unplug the power cord
wait for 2-3 minutes
plug the power cord back in
turn the unit on and reinsert the cartridiges

check for functionality

Nov 21, 2010 | HP LaserJet 2840 All-In-One Printer

1 Answer

It says hp laser jet error 2. How do I fix?


power down the pc and the printer, Kindly disconnect the printer from the mains, remove and connect firmly the data cable, reconnect the power back to the mains, and reboot both pc and printer this will do it,
thank you

Apr 06, 2010 | HP LaserJet 2840 All-In-One Printer

2 Answers

Need a power cord where can i get one


www.partsurfer.hp.com in the support section will have your ac adapter. The best price, right from the source.

Feb 09, 2010 | HP OfficeJet J4580 All-In-One Laser...

2 Answers

The hp color laser jet 2840 does not print. message "50.2 fuser error" appears


HP recommended checks: 1. adequate 120 VAC power supply, 2. Remove Fuser Assembly, wait 5 minutes and then reseat. 3. Reset the printer to Factory Default settings (remember to copy down the IP address, mask and gateway numbers first).

While this may solve the problem, it is much more likely it's time to replace the fuser. Cost is approx $125 if you buy it online. Just do a Google search on HP 2840 fuser.

This link will show you where your fuser is and how to remove and replace it.
http://h20464.www2.hp.com/resultsCSR.htm?prodSeriesId=445194&MEID=631309C6-088F-43F9-931F-604BAE10EB69

Oct 21, 2009 | HP LaserJet 2840 All-In-One Printer

1 Answer

2840 Hp Color laser jet displaying Scanner error 05


The book says to try the old power off and on. And then replace the scanner assembly and then the formatter.

Personally, I would try the formatter.

Sep 26, 2009 | HP LaserJet 2840 All-In-One Printer

1 Answer

HP Laser Jet 3030 not work


remove scanner glass and use compressed air to blow out the scanner

Sep 23, 2009 | HP LaserJet 3030 All-In-One Printer

Not finding what you are looking for?
HP LaserJet 2840 All-In-One Printer Logo

Related Topics:

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96518 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...