Question about Projection Televisions
I have a samsang hgn 4226 tv when i plug it on red light blinks but it does not turn on
please email me firstname.lastname@example.org
SOURCE: Mitsubishi ws-65513
Have you looked at the DM board fix yet that's available here. http://www.fixya.com/howto/h154057-mitsubishi_dm_board_repair Check it out. If the inside of your TV set does not look like this, you will need to get the service manual to disassemble the set and get to the DM board, but use the rest of the guide to repair the board. If you are successful, you will save almost a 1000 bucks! Good Luck
Posted on Jul 14, 2007
SOURCE: red blinking light
It's most likely convergence -- the small board up and to the right inside the back of the TV, which has two large amp Ic's attached to it..
Unplug the +/- 20v line on the fron left corner of that board (red in color) and then try and power on the set... If the set comes on the board needs to be repaired and it's an easy unplug and two screws that mount it inside.
PO Box 442
LOng Beach, WA. 98631
Posted on Jun 15, 2008
Tips for a great answer:
Feb 03, 2013 | Samsung HLN467W 46" Rear Projection HDTV
Jan 25, 2010 | Mitsubishi WT-46807 46" Rear Projection...
Aug 28, 2009 | Samsung HLP4674W 46" Rear Projection HDTV
Nov 05, 2008 | Projection Televisions
Oct 07, 2008 | Mitsubishi WS-55613 55" Rear Projection...
Jul 12, 2008 | Projection Televisions
Apr 18, 2008 | Samsung HCM4216W 42" Rear Projection...
23 people viewed this question
Usually answered in minutes!