Question about Whirlpool GU2400XTP Built-in Dishwasher

Open Question

Whirlpool gu2400xtpt3 Green light flashes, doesn't run, how can I repair this myself? "Normal" light keeps blinking; tripping breaker didn't work; all the "sequencing" suggestions (hi temp, heated dry, etc) didn't work. I'm at my wits end. Any ideas? I have a Whirlpool GU258xtpq3

Posted by on

  • allone Oct 22, 2008

    "clean" light flashed 7 times and then repeats - washer will not cycle all the way.

×

1 Suggested Answer

rylee_smith
  • 8619 Answers

SOURCE: Dishwasher: Green light flashes and will not turn on

Hi

Please press the following sequence to reset the washer "Heated dry" "Normal" Heated Dry" "Normal". This will reset the machine. Also try and locate the tech sheet in lower kickplate.

Please do accept this solution and revert for further assistance.

Thanks
Rylee

Posted on Jul 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Updated details: Normal cycle keeps blinking


Have u tried unplugging it for about 2m and plug it bk in that will master reset everything like u just bought it and see how that's works out

Sep 18, 2015 | Dishwashers

2 Answers

How do you reset the whirlpool gu2400 xtp83 dishwasher. the clean light is flashing. The unit will not start


Can be caused by detection of a heater circuit problem. You can reset by running the diagnostic cycle. To turn of the diagnostic cycle, press: HEATED DRY button, then NORMAL button, HEATED DRY button again, then NORMAL button. The cycle runsfor ~22 mins. When it completes, the blinking light should go out. You can then try running the dishwasher again. If the problem comes back, the heater element or Thermister may need to be replaced

Jul 29, 2009 | Whirlpool GU2455XTS Built-in Dishwasher

1 Answer

Dishwasher: Green light flashes and will not turn on


Hi

Please press the following sequence to reset the washer "Heated dry" "Normal" Heated Dry" "Normal". This will reset the machine. Also try and locate the tech sheet in lower kickplate.

Please do accept this solution and revert for further assistance.

Thanks
Rylee

Jul 10, 2009 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Won't run - normal light flashes


When I had this problem, it turned out to be the heating element.

Jul 29, 2008 | Whirlpool GU2400XTP Built-in Dishwasher

3 Answers

"Clean light" keeps blinking; dishwasher won't start new cycle


Check to see how it's loaded. If something is obstructing either of the spray arms it will not start. I had this same problem and checked to see if there was something impeding the arms - I found there was. Reloaded the unit and it's running like a champ now!

Feb 07, 2008 | Frigidaire 24 in. GLD2150RCC Built-in...

2 Answers

Normal Light Blinking - Dishwasher not working


I HAD THIS SAME PROBLEM. TRY PUSHING THIS SEQUENCE OF BUTTONS: HEATED DRY, NORMAL, HEATED DRY, NORMAL. THIS RESET MY PANEL AND IT IS WORKING NORMALLY NOW. I FOUND THIS SUGGESTION ON ANOTHER SITE.

Sep 14, 2007 | Whirlpool GU2400XTP Built-in Dishwasher

9 Answers

Whirlpool gu2400xtpt3


I too had Flashing Clean light and only responded to Cancel light by trying to drain. Whirlpool Model DU1145. I too got problem to clear by pushing High temp,Heated dry, High temp and Heated dry. All lights on display lit up then it went through sequences of all cycles.

May 14, 2006 | Whirlpool GU2400XTP Built-in Dishwasher

Not finding what you are looking for?
Whirlpool GU2400XTP Built-in Dishwasher Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...