Question about Fujitsu Plasmavision 42" TV

1 Answer

42" Fujitsu Plasma TV (About 10 yrs old)

The power keeps turning off after 10 minutes of viewing. The power light starts to flash red(usually steady green when on).

Posted by on

  • asmith785 Nov 01, 2008

    I have a Fujitsu 42" plasma Model No PDS4221W-H with the same problem, only mine turns on for 2 seconds and then powers down immediately. Seems like a short in the power source. There is a fairly loud noise from the back of the TV when it turns off.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 534 Answers

You have not fully identified the model number of your unit, but
this is most likely caused by the Main Power pcb.
For models P42HHxxxxx and P42HCxxxxx see Fujitsu Service Bulletin on this problem. -see link below
http://tomtom2k5.free.fr/fujitsu/PDP-0035-06.pdf

A competent service technician should be able to implement the service bulletin.

Posted on Jun 02, 2009

  • John Bloomfield Sep 16, 2009

    See also Fixya 'Tips and Tricks - Fujitsu Plasma 42" random shutdown' for further updated information on this problem.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Panasonic Viera 42" Plasma, 2 yrs old, Model # 42PZ80U, screen just went black and I cannot bring it back. The red light is blinking 10 times.


Typically this means you've got a power supply that went bad. I've been doing research for a potential class action lawsuit on these "blinking lights of death" problems that the Panasonics are having and that is usually why the tv will show 10 blinks. Occasionally another component inside the tv can be what caused the tv to shutdown and show the 10 blinks.
I'd like to hear more about your experience with the television and any contact you've had with Panasonic in an attempt to get the television repaired. If you're inclined to share your story with me, please contact me at kiaeger@levjen.com.

Oct 12, 2010 | Panasonic TH-42PZ700U 42 in. Plasma...

1 Answer

I have a Fujitsu 42'' PDS4221 - 10 years old - shuts itself off


See Fixya tips and tricks:-
'Fujitsu Plasma 42" random shutdown - continuous flashing red'

While the model of your set is slightly different, the checks described generally still apply, as it is very similar.

Nov 18, 2009 | Cars & Trucks

2 Answers

42 Fujitsu PDS4221W-H, no power


A user manual is available from this link:-
http://safemanuals.com/user-guide-instructions-owner-manual/FUJITSU/PLASMAVISION%20PDS4221-_E
Check for a hidden power switch under the lower left or right under corner of the screen, ensure it is ON (- not sure if this switch is fitted to your model, but it does exist on other Fujitsu models).
Fujitsu no longer support or manufacture plasma screen TVs - therefore no parts are available from them. [Fujitsu only serviced to board replacement level - very expensive].
The Fujitsu models (generally, after 4 or more years use) suffer from cracked solder joints on circuit boards (due thermal cycling stress).
See Fixya tips:-
"Fujitsu Plasma 42" random shutdown - continuous flashing red led".

Oct 28, 2009 | Fujitsu Plasmavision 42" TV

1 Answer

Power Issue 42" plasma flat HDTV Pixel Plus


you ip board is bad go t0 this site partstore.com typ in the modle of tv and buy it . works like brand new .trust mr it did and saved a lot

Apr 07, 2009 | Samsung SPN4235 42 in. Plasma HDTV

1 Answer

Fujitsu plasma went blank


Need to have the power supply checked by a qualified technician.

Feb 12, 2008 | Fujitsu Plasmavision 42" TV

1 Answer

Fujitsu plasma tv


This is most likely caused by the Main Power pcb.

See Fujitsu Service Bulletin on this problem. -see link below
http://tomtom2k5.free.fr/fujitsu/PDP-0035-06.pdf

A competent service technician should be able to implement the service bulletin.

Jan 25, 2008 | Fujitsu Plasmavision P42VCA30EH 42 in....

1 Answer

Fujitsu Plasma 42' approx 4 yrs old


HI , i have the same problem . it is either the power supply unit or the plasma display panel . I am problem solving it currently . generally the cost is about $1000 (aus) to fix . it is worth doing as fujitsu are outstanding plasmas .
if u need service manual pls email me at all_ps2_sales@hotmail.com and will send service manual .it has the the checks to do so u know which part needs replacing . U need some experience to do the checks
hope this helps

Dec 12, 2007 | Fujitsu Plasmavision PDS-4221 42 in....

1 Answer

Fujitsu 42" Plasma Display shuts off after 20 minutes


This is most likely caused by the Main Power pcb.

See Fujitsu Service Bulletin on this problem in a similar model from Fujitsu. -see link below
http://tomtom2k5.free.fr/fujitsu/PDP-0035-06.pdf

A competent service technician should be able to implement the service bulletin.
A similar service bulletin is probably available for your model. Request bulletin from Fujitsu 'service@fujitsugeneral.com'

Oct 21, 2007 | Fujitsu Plasmavision PDS-4233 42 in....

24 Answers

Panasonic Viera TH-42PV7HS Plasma keeps shutting down


Hi to all, My 42" Panasonic plasma have the same problem. It turned itself off and now red light flashes 7 times, than after short pause 7 times again. And so on. Any ideas what is wrong??

Oct 07, 2007 | Televison & Video

Not finding what you are looking for?
Fujitsu Plasmavision 42" TV Logo

752 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fujitsu Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71635 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Cindy Wells

Level 3 Expert

4884 Answers

Are you a Fujitsu Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...