- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Practically you can exit by pressing 0&9 together and it will come to ready mode.You will see this kind of display only when you want to enter the service mode, now you will have to enter a value eg., if your machine gives error c44, then you can go to service mode and then enter 400 to reset the error.
Turn ON the power while pressing the [Clear/Stop] button. On the Service Mode screen displayed after
starting up, press the up key, left key, bottom key, and then right key, and then press [START]. To enter
the desired mode, select the mode using the up or down key, then press [OK].
You can use the Toshiba e-studio 160/200 service manual for this machine, Enter 08 Service mode and: check these addresses 340 Drum counter end setting. Drum Life:160 and 200 are 27,000 copies. 250 is 33,000 copies. If set to 0:Nothing displays. 673 Resetting drum related counters (08/355 and 08/401) works only if 08/869 is set to 1=SRU, if set to 0 is=CRU. SRU: Service Replaceable Unit. CRU: Customer Replaceable Unit.
The drum counter reaches 25000 copies , it's time to change the drum and reset counter .
Enter the reset mode by pressing : # - * - c - * .
then press : 20 - start -01- start - CA - CA .
Hope this will help .
In the manual it says to "Turn on power while holding down the status button on the network expansion kit. Continue to hold down the status button until a beep sounds." It looks like the default password was TOSHIBA which took me forever to find. The user name should just be admin.
switch off...hold down 0 + 8 keys,
switch on holding keys for 5-10 secs then let go.
punch in 251 then print key should show pm set figure,punch in say / add 20,000 on to figure then press set in the display.
switch off then on should have cancelled prevent maintenance.