Reinstall diagram 94 ford taurus GL, 3.0(U) diagram for reinstalling my serpentine belt

Question edited for clarity, spelling and add maker.

Shown in the link

https://www.google.com/search?q=2007+Ford+Mustang+V6+serpentine+belt+diagram

Service manual

https://cardiagn.com/2005-ford-mustang-service-repair-manual-pdf/

..

Got a link from JustAnswer with an image for the belt path -
Diagram of serpentin belt for 2007 ford taurus se

Robert, Serpentine belt diagram. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How To Install Replace Serpentine Belt Ford Taurus 3 0L V6 1AAuto com
2003 Ford Taurus V6 3 0L Serpentine Belt Diagrams serpentinebelthq com
2003 Ford Taurus Belt Diagram Am Having Problem Getting My

Serpentine belt diagram 2002 ford taurus 3 0 2002 Ford Taurus
should be the same for 2003

OK, one doesn't need a belt routing diagram to reinstall a new belt.

Just route the belt so that one by one you put the ribbed part of the belt up against the ribbed pulleys, and the smooth part of hte belt up against the smooth pulleys. Do this until one arrives at the tensioner and release tension with a breaker bar to put the belt on the final tensioner pulley.

Check that the tensioner has enough spring load for the belt to maintain the right friction against all of the serpentine pulleys.

That's all there is to it.

It is on the underside of the hood(unless hood replaced during an accident repair.If unfound go to a Ford parts dept. and request a idler pulley diagram photo

I can't find that Ford had a 3.6L in 2000 for Mustang.
Here's a link to a 3.8L
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7002

Here's a 4.6L diagram
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S8016

click on the link below, enter the year,make,model, and engine size of the car.
Then go to the left and under the Serpentine belt part number, you will see a "Routing diagram" link. Click on that to get the diagram. Best of luck!
Greg

http://www.mvreader.com/multiview/dayco/index.php?bgInterchange=1&l=n

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

if yours has the 3.8L then here is the diagram. Hope this helps
~ Zach